Catalog
Number |
Description |
Price |
New Products!!
Glisseal Normal Vacuum and High Vacuum Grease New Products!! |
| |
30840 |
 Vacuum Pump -
This direct drive vacuum pump is recommended for use with our Large Desiccator (#80040). Ultimate total pressure of 2 x 10-3 mbar. Free air displacement is
114 liters per minute at 60 Hz. 1/2" I.D. heavy walled tubing required. Operates on
115 VAC and 60 Hz.
|
$2,569.00 |
30845 |
Vacuum Pump - Identical to #30840 except it operates on 220 VAC and 50 Hz. Free air displacement at 50 Hz is
95 liters per minute. |
on request |
30850 |
Mist Eliminator - This oil mist eliminator is mounted on the outlet port of vacuum pumps 30840 and 30845. |
$385.00 |
30851 |
Replacement Filter Cartridge - New cartridges can be easily installed in Mist Eliminator (#30850). |
$72.95 |
| |
|
|
30021 |
Apiezon L Vacuum Grease - Good, general purpose high vacuum grade lubricant. Petrolatum hydrocarbon grease containing no additives. Vapor pressure of 8 x 10-11 torr at 20o
C. May be used on all ground joints in vacuum systems except where joint temperatures exceed 30o C. Sold in 50 g tube. |
$195.95 |
30024 |
Apiezon M Vacuum Grease - General purpose lubricant similar to Apiezon L but containing more wax. Vapor pressure of 2 x 10-9 torr at 20o C. Recommended for use
in vacuum work and as a good, general lubricant throughout the laboratory. Not intended for use with joints above 30o C. Sold in 25 g tube. |
$102.95 |
30026 |
Dow Corning Vacuum Grease - Silicone lubricant which maintains its consistency from -40 to +230o C. Chemical resistant and vapor pressure at 10-8
torr. Tube size is 5.3 oz. |
$41.95 |
New Products!!
Glisseal Normal Vacuum and High Vacuum Grease New Products!! |
| |
|
|
30022 |
Torr Seal - Excellent sealant for leaks in vacuum equipment requiring vacuum down to 10-9
or lower. Forms a high strength bond with metals, ceramics or glass. No solvent involved to evaporate. Torr Seal is a two component system easily mixed. At room temperature it hardens in 1 hour, cures in 24 hours. At
60oC it hardens in 30 minutes, cures in 90 minutes. Forms a reliable seal for long term use. Package of two tubes, total weight is 135 g. MSDS Technical Data Sheet |
$83.95 |
30022A |
 New Product!! Applicator Gun
with Torr Seal cartridges (2 oz.) and
3 mixers. This new mixing system uses the same low vapor pressure resin sealant as Torr Seal. With its scientific method of mixing epoxy components, the system
will save preparation time and the epoxy will always be measured and mixed properly the first time.
|
$140.95 |
30022G |
New Product!! Applicator Gun Only for use with 30022CM below. |
$82.95 |
30022CM |
New Product!! Torr Seal Cartridges (2 oz.) with 3 mixers. |
$99.95 |
30022M |
New Product!! Torr Seal Mixers - Package of 6. |
$27.95 |
VP300
|
Vacuum Patch - Generic equivalent of Torr Seal. Seals leaks with no solvent evaporation. Applications to thermistors and all varieties of vacuum systems. Consists of 1.2 ounces of
hardener and 2.8 ounces of resin. Technical Data Sheet |
$51.95 |
| |
|
|
Torr Lube - High Vacuum Lubricant |
| |
30023 |
Vacuum Hose - Specially recommended for vacuum work. Extra heavy 3/8" thick wall of high quality natural rubber (red). 3/4" I.D. and 1 1/2" O.D. |
$22.95/ft |
| |
|
|
30005 |
Ladd Mechanical Pump Oil - Exceptionally high quality oil for direct drive or belt driven vacuum pumps. 1 liter. MSDS |
$26.25 |
30006 |
Ladd Mechanical Pump Oil - Same as 30005 in 1 gallon size. |
$68.95 |
SAN-5 |
Santovac 5 - Diffusion Pump Oil. 100 ml. |
$274.95 |
SAN-5A |
Santovac 5 - Diffusion Pump Oil. 500 ml. |
$1025.00 |
30015 |
Convoil 20 Diffusion Pump Oil - Distilled hydrocarbon. Ultimate pressure 5 x 10-8 torr at 25o
C. Convoil 20 is also ideal for mechanical pumps. It has lower sludge, exhibits less degradation and provides 5 to 10 times the life of other oils. 8 ounce bottle. MSDS |
$24.95 |
30017 |
Convoil 20 Diffusion Pump Oil - Same as 30015 in 1 gallon. |
$179.95 |
12381 |
Octoil S Diffusion Pump Oil - Highly distilled synthetic ester. Ultimate pressure 5 x 10-8 torr at 25o
C. Vacuum rapidly achieved and maintained for long operating periods.
100 ml bottle. |
$62.95 |
12382 |
Dow Corning Silicone Diffusion Pump Oil (#704) - A silicone oil with excellent heat, oxidation and radiation resistance. Ultimate pressure 10-6 to 10-8
torr. Withstands pressure bursts and is thermally and chemically stable. 500 ml bottle. |
$189.95 |
12396 |
CQ 704 Silicone Diffusion Pump Fluid - Equivalent to Dow Corning #704 Fluid. Vapor pressure at 25oC is 8.2 x 10-8 torr. Boiling point at 0.06 torr is 220o
C.Tetramethyl tetraphenyl trisiloxane. 500ml bottle |
$104.95 |
12396G |
CQ 704 Silicone Diffusion Pump Fluid - 1 gallon can |
$440.00 |
12397 |
CQ 705 Silicone Diffusion Pump Fluid - Equivalent to Dow Corning #705 Fluid. Ultimate vacuum (untrapped) is 10-9 to 10-10 torr. Boiling point at 0.06 torr is 242
oC. Pentaphenyl trimethyl trisiloxane. 500ml bottle |
$129.95 |
12397G |
CQ 705 Silicone Diffusion Pump Fluid - 1 gallon can. |
$765.00 |
30019 |
Dow Corning 200 Fluid - 10 cps. Replacement fluid for Ladd Chiller. 1 quart |
$122.95 |
| |
|
|
73030 |
Stainless Steel Liquid Nitrogen Thermos - One quart capacity. Used for filling liquid nitrogen baffle and for temporary storage of liquid nitrogen. |
$60.95 |
73020 |
 Stainless Steel Liquid Nitrogen Thermos - Two quart capacity.
|
$82.95 |
