The following products are from Acheson Colloids/Henkel
For other products (Electrodag, Dag, Aquadag, Aerodag, etc.)
please see our SEM Conducting Paints page

Note about shelf life of all paints: Although we would like to accomodate all requests for a specific remaining shelf life we cannot guarantee that these requirements can be met. We do, however, guarantee that, at minimum, there will be 90 days shelf life remaining on our paints. In most cases this value will be much higher.

We can obtain nearly any other product from the line. If you don't see the specific product  you need, contact us for more information.

NEW !!!! Electrodag 550 Replacement !!!!

Electrodag 440 AS is a shielding coating designed to provide electromagnetic compatibility (EMC) in electronic equipment housing. It is an extremely conductive nickel coating that provides excellent shielding against radiated electromagnetic interference (EMI) and protection against electrostatic discharge (ESD). It is also a viable substitute for Electrodag 550!!   Data Sheet          MSDS

60846

Electrodag 440 AS - 5 kg can. (approximately 1 gallon)

$1,250.00

Please Note!! The following two products (Electrodag 437 and Electrodag 1415M) are designed to replace all discontinued shielding coatings that had contained silver-plated copper.
 

NEW!! Electrodag 437 is a copper-based shielding coating designed to provide electromagnetic compatibility (EMC) on cabinetry used for electronic equipment. It is an extremely conductive coating providing excellent shielding against radiated electromagnetic interference (EMI) and protection against electrostatic discharge (ESD). Electrodag 437 combines increased conductivity with improved economy. It offers ease of application and, contrary to conventional copper coatings, excellent stability to difficult environmental conditions.  Data Sheet      MSDS

Catalog
Number

     Description

Price

60950

Electrodag 437 - 5kg can
(approximately 1 gallon).

$625.00

60950C

Electrodag 437 - Case of 5 X 5kg  cans.

$2,690.00

NEW!! Electrodag 1415M is a silver-based shielding coating which provides electromagnetic compatibility (EMC) and has been specifically designed to give increased coverage while maintaining a very high conductivity. It is a very economic means of achieving excellent shielding against radiated electromagnetic interference (EMI). It maintains its low resistance even after exposure to heat, cold, humidity and salt spray. It is an air drying system that requires no primer or top coat. It is easily applied by spray or brush and is compatible with plastics commonly used for electronic equipment enclosures.     Data Sheet              MSDS

Catalog
Number

     Description

Price

60955-3

Electrodag 1415M - 1.5kg cans
(approximately 1 quart). price for 3-5 cans

$3,250.00/can

60955-6

Electrodag 1415M - 1.5kg cans
(approximately 1 quart). price for 6-9 cans

$1,995.00/can

60955-10

Electrodag 1415M - 1.5kg cans
(approximately 1 quart). price for 10 cans

$1,495.00/can

DAG 213 is one of a series of resin bonded graphite coatings designed to provide dry film lubrication on many substrates. The coatings are clean, dry, long-wearing and provide superior maintenance-free lubrication for a wide range of light to medium load applications. A thin film of DAG 213 keeps wear uniform and reduces friction on mating metal parts without requiring increased manufacturing tolerances. Components are protected from metal-to-metal contact even in applications approaching boundary lubrication, reducing the risk of damage due to partial or complete seizure.
                                 Data Sheet                     MSDS

Catalog
Number

     Description

Price

DAG213-30M

DAG 213 - 30 ml (with brush cap)

$22.95

DAG213Q

DAG 213 - 1 quart (2 lbs.)

$95.00

DAG213G

DAG 213 - 1 gallon (8 lbs.)

$370.00

DAG2135G

DAG 213 - 5 gallon (40 lbs.)

$815.00

60845S2

Solvent SB-2 - Solvent for DAG 213.
     1 gallon      MSDS

$79.95

Electrodag 550 is a very conductive and stable nickel acrylic lacquer coating. It provides excellent long-term shielding against radiated EMI. It is stable, easily mixed and burnish resistent. It is compatible with most plastics used in electronic equipment cabinetry. Over applications can be removed with lacquer thinner or ketone solvents without staining.
                    Data Sheet          MSDS        Applications Guide

60845

Electrodag 550 - 13 lbs (1 gallon)

NLA
see above

60845HG

Electrodag 550 - 6.5 lbs (1/2 gallon)

NLA

60845-5G

Electrodag 550 - 51 lbs (3.8 gallons)

NLA

Solvents for Electrodag 550 (Product:solvent ratio of 1:0.8 by volume)

60845S1
MSDS

Solvent SB-1 - Fast drying. Use on tough to bite into plastic surfaces. Can also be used as diluent for Electrodag SP-017 (product:solvent ratio of 2:1 by volume).

call for price

60845S8

Solvent SB-8 - Medium drying. Use on general purpose plastics.

call for price

60845S10
MSDS

Solvent SB-10 - Slower drying. Use on solvent sensitive plastics.

$98.00/gallon

Electrodag SP-017 is a highly conductive coating designed to provide assistance in achieving electromagnetic compatibility with plastic enclosures. This high solids, solvent-based product was formulated to provide an extremely conductive coating with excellent adhesion/cohesion properties .       Data Sheet     MSDS

Catalog
Number

     Description

Price

60830Q

1 quart Electrodag SP-017

NLA

60830HG

1 half gallon Electrodag SP-017

NLA

60830G

1 gallon Electrodag SP-017

NLA

Electrodag 6050 is a ready-to-spray EMI / RFI shield coating system specially formulated for low ohms at thin film builds on plastic electronic equipment housings. Electrodag 6050 reduces cost and increases productivity with more parts per mask wash cycle. It exhibits excellent environmental aging stability with superior scratch/mar resistance while providing an aesthetically pleasing coating appearance with excellent long-term shielding and grounding properties.
                               Data Sheet       MSDS       Applications Guide  

60814

1 gallon Electrodag 6050

NLA

60814-5g

5 gallons Electrodag 6050

NLA

Molydag 254N is one of a series of resin-bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. Molydag 254N is a synergistic conbination of MoS₂ and other lubricants dispersed in an epoxy resin solution. It can be applied by standard brush, dip-spin or spray techniques. Molydag 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. Molydag 254N provides an effective performance, even as a very thin film (0.0003" or 8 microns), thus there is little interference with operating tolerances.
                                      MSDS             Product Data Sheet

60835Q

1 quart Molydag 254N

$310.00

60835G

1 gallon Molydag 254N

$540.00

60835P

1 50 pound pail of Molydag 254N

$1,595.00

Electrodag EB-012 is one in a series of graphite-based conductive coatings
designed to provide controlled electrical properties. It is designed to provide a conductive, chemical-resistant coating on most metals. It is a conductive, chemical-resistant coating for lithium batteries.        Data Sheet ,    MSDS

60939

1 pint Electrodag EB-012

$99.95

60940

1 quart Electrodag EB-012

$150.00

60941

1 gallon Electrodag EB-012

$239.00

60942

5 gallons Electrodag EB-012

$575.00