Catalog
Number |
Description |
Price |
30170 |
Carbon Rod Evaporation Unit - This unit has provided excellent results in all types of evaporators throughout the electron microscopy community for many years. A combination of
ball-bearing motion in the chuck, gravity and long-arc spring-feed give uniform pressure that ensures a smooth, uniform advance of the carbon rod. This smooth motion allows use of a
lower current, with a consequent reduction of radiant heat. Designed to hold 1/8" diameter carbon rods.
|
$849.00 |
30400 |
Ladd Electrical Leads for Carbon Rod Evaporation Unit |
$26.95 |
30401 |
Non-Ladd Electrical Leads for Carbon Rod Evaporation Unit. |
$26.95 |
30175 |
Accessory Arms - Used with the Carbon Evaporation Unit to evaporate platinum-carbon pellets. The platinum-carbon pellet is held between a flat face carbon rod held in one chuck and
drilled out carbon rod in the opposite chuck. The angle of evaporation is easily adjusted from 0o to 50o by moving the accessory arms up or down the main posts of the evaporation unit.
State diameter of carbon evaporation unit posts when ordering. |
$575.00 |
30402 |
Ladd Electrical Leads for Accessory Arms |
$26.95 |
30403 |
Non-Ladd Electrical Leads for Accessory Arms |
$26.95 |
30180 |
Carbon Evaporation Shield - Keeps bell jar clean to provide accurate observation of specimen throughout evaporation. Short circuiting of electrodes by deposited carbon is greatly reduced,
as is cleanup time for the entire bell jar. The shield consists of an annealed Pyrex tube mounted between two aluminum discs supported by arms of the carbon evaporation unit. Pyrex glass tube has a precisely
proportioned slot to control the flow of carbon to the specimen. this fire-polished tube can easily be removed for cleaning, and will not crack from heat generated during evaporation. Complete mounting
instructions included. |
$345.00 |
30160 |
Low Temperature Thermocouple Feed-Through - A necessary accessory for the Ladd Vacuum Evaporator if you intend to do low temperature work requiring a thermocouple feed-through. The feed
through is factory-installed, therefore should be ordered with evaporator. |
$330.00 |
60975 |
Shielded Double Source Evaporation Unit - Designed specifically for use in scanning electron microscopy. Consists of a heavy nickel plated brass base with securely positioned upright
posts. Each post has an extension attachment to hold a carbon evaporation source and a tungsten basket for metal evaporation. Both sources are shielded by a single annealed Pyrex tube with a carefully
proportioned slot in the bottom to enable evaporated material to flow to the specimen. Carbon and metal can be evaporated during a single pump-down. Keeps bell jar clean to allow accurate observation of
entire process, and saves clean up time. |
$1275.00 |
60976 |
Ladd Electrical Leads for Double Source Unit. Set of 4 leads. |
$51.95 |
60977 |
Non-Ladd Electrical Leads for Double Source Unit. Set of 4 leads. |
$51.95 |
30185 |
Annealed Pyrex Tube - Extra tube for Catalog Number 30180 (Carbon Evaporation Shield) and Catalog Number 60975 (Shielded Double Source Evaporation Unit). |
$105.00 |
30250
MSDS |
Carbon Rods - 12" x 0.120" diameter. Machined to close tolerances for ease of use in Carbon Evaporation Unit and Carbon Rod Sharpener. Package of 10 rods. |
$56.95 |
30251 |
Carbon Rods - Like 30250 except 50 rods per package. |
$259.95 |
30255 |
Carbon Rods - Like 30250 except 100 rods per package. |
$395.00 |
30260 |
Carbon Rods - 12" x 0.250" diameter. For 1/4" Carbon Rod Sharpeners. |
$59.95 |
Carbon Rod Points - Carbon rod points of 0.040" diameter are available in different lengths to control the amount of carbon deposited when evaporated. We recommend a
5/16" long rod for carbon replicas, a 3/16" long rod for carbon substrates and a 1/16" long rod for carbon coated plastic substrates. Sold in lots of 25 to 50 rods with two points per rod. |
30262 |
3/16" Carbon Rod Points - 100 points MSDS |
$127.95 |
30263 |
1/16" Carbon Rod Points - 100 points |
$127.95 |
30264 |
5/16" Carbon Rod Points - 100 points |
$127.95 |
30265 |
5/16" Carbon Rod Points - 50 points |
$69.95 |
30266 |
3/16" Carbon Rod Points - 50 points |
$69.95 |
30267 |
1/16" Carbon Rod Points - 50 points |
$69.95 |
30270 |
Drilled-Out Carbon Rods - Makes evaporation of platinum easy and gives the fine grain of platinum-carbon. Holds one end of platinum-carbon pellet during evaporation. The other end butts
against the flat face of the opposite carbon rod. Sold in lots of 25 rods, each rod having a recess at each end. MSDS |
$58.95 |
30257 |
New Product Blank Carbon Rods - 2" (length) x 1/8" (diameter) carbon rods. Can be sharpened on one or both ends. Can also be used as a blank in an
evaporation fixture. 25 rods per box. |
$39.95 |
30258 |
New Product Blank Carbon Rods - Like 30257 above except 50 rods. |
$67.95 |
