|
|
 |
|
|
57 Years of Quality and Innovation |
|
|
|
A new economical Quartz Crystal Monitor (QCM) for measuring thin film deposition rate and thickness. This film thickness transducer is the simplest and least expensive QCM available anywhere. It connects directly to a
USB port on your PC. Windows® - based software included for operation and data
logging. It weighs less than 2 ounces and is small enough to fit in a shirt pocket.
Setup and operation couldn't be easier. Connect the Q-pod BNC connector to the signal cable from a QCM sensor. On the other side, a standard USB cable connects to your
PC. No external oscillator or power source is required.The Q-pod software displays rate, thickness, frequency, crystal life and a graph of rate
versus time for up to 8 Q-pods simultaneously. Q-pod readings can be logged to disk in spreadsheet friendly comma-delimited format. |
|
|
|
Specifications
Sensor |
Compatible with any QCM sensor |
Frequency Range |
1 to 10 MHz |
Frequency Resolution |
0.05 Hz at 6 MHz |
Frequency Accuracy |
0.002 % |
Frequency Stability |
± 2 ppm total, over 0 to 50 oC |
Input |
BNC |
Interface & Power |
USB, v2.0 or later |
Size |
1" x 2" x 2.5" (25 x 50 x 64 mm) |
Weight |
2 oz (32 gm) |
Software included |
Provides display and setup of all operating parameters |
Computer requirements |
Any PC running Windows 2000/XP/Vista, with one available USB port for each Q-pod |
|
|
|
|
Catalog
Number |
Description |
Price |
FTT* |
Film Thickness Transducer - includes:
- Windows based software for setup & operation
- QCM sensor simulator/tester
- 6" BNC Cable (connects unit to feedthrough)
- 10' USB cable (connects unit to your PC) |
$760.00 |
FTM-GC |
Replacement / Spare Crystals, 6MHz, Au,
tray of 10
|
$89.95 |
FTM-S |
Film Thickness Sensor - Single crystal head, no cooling lines. |
$645.00 |
FTM-F |
Film Thickness Monitor Feedthrough - 2.75" conflat feedthrough. No water lines. |
$575.00 |
FTM-C |
Film Thickness Monitor in-vacuum cable - 30 inches long. |
$129.95 |
Options |
|
|
FTM-FC |
Film Thickness Monitor Feedthrough - 2.75" feedthrough with 1/8" compression fitting for water cooling. |
$695.00 |
FTM-SW |
Film Thickness Monitor Single Crystal Head - 1/8" water lines. |
$695.00 |
*Important Note!!
The Q-pod (Catalog Number - FTT) includes everything you need outside
the chamber. For a complete measurement system, you also need to order a sensor, feedthrough, in-vacuum cable, and crystals. |
|
|
