My Account

Welcome to our new website!

Lubricants, Conductive Coatings & Paints - Electrodag, Molydag & More

Ladd Research stocks many kinds of lubricants, conductive coatings, and paints for laboratory applications including solvents, electrodag & molydag.

15 Item(s)

per page

Grid List

Set Descending Direction
Minimum purchase of 3 quart cans

Electrodag 1415M

A silver-based shielding coating which provides electromagnetic compatibility (EMC) and has been specifically designed to give increased coverage while maintaining a very high conductivity. It is a very economic means of achieving excellent shielding against radiated electromagnetic interference (EMI). It maintains its low resistance even after exposure to heat, cold, humidity and salt spray. It is an air drying system that requires no primer or top coat. It is easily applied by spray or brush and is compatible with plastics commonly used for electronic equipment enclosures. Each can contains 1500 grams (approximately 1 quart).

Minimum order - 3 cans

 

Electrodag 1415M is designed to replace all discontinued shielding coatings that had contained silver-plated copper.

Starting at: $1,545.00

Silver Conductive Grease

Conductive Paste and Grease

Conductive greases and paste to improve electrical and thermal connections between sliding or non-moving surfaces.

See below for a more detailed description of each product.  

Starting at: $15.95

Bonderite L-GP GP460 Aero - A general purpose lubricant - 453g Aerosol

Bonderite L-GP GP460 Aero - A general purpose lubricant - 453g Aerosol

Bonderite L-GP GP460 Aero is an anti-seize lubricant containing high purity graphite in petrolatum. This material is designed to provide long-lasting service over a wide temperature range. It withstands extreme pressure, carries high loads, and reduces friction, galling, and seizing. Bonderite L-GP GP460 Aero meets the requirements of General Electric specification A50TF201.

Known as Acheson GP 460

Call For Price
Super Shield 842 Silver Conductive Coating

Super Shield 842 Silver Conductive Coating

The 842 Silver Conductive Coating is a very highly conductive acrylic paint designed to reduce electromagnetic or radio frequency interference (EMI/RFI). Long-term protection from EMI/RFI is assured by its durable acrylic resin that minimizes loss of metallization through rubbing, and by the oxidation resistant silver that slows down conductivity degradation with age. The flake shape helps ensure maximum points of contact to ensure better conductivity. In addition, loss of shielding through paint peeling is unlikely since the acrylic resin system was shown, in UL related testing, to adhere to even difficult substrates like ABS and polycarbonates.

  • High Conductivity (≥15 Siemen)—Low Surface resistance of ≤0.066 Ω/sq for a 1 mil coat
  • Tough and durable coating
  • Rub off resistant
  • Corrosion resistant coating
  • Stronger adhesion than water based coatings
  • Low VOC’s
  • Median attenuation 75 dB ±20 dB per 25.4 μm (~1.0 mil) for frequency range of 10 MHz to 18 GHz

Dilute this coating with Thinner 435 (very fast drying) or Thinner 4351 (moderately fast drying).

Starting at: Call For Price

Total Ground carbon conductive coating

Total Ground 838 Carbon Conductive Coating

The 838 Total Ground Carbon Conductive Coating is an economical, acrylic paint that is used to create conductive, static free surfaces with excellent characteristics. Coated surfaces reduce electromagnetic or radio frequency interference (EMI/RFI). The carbon in the coat resists rubbing off to the touch. Further, the cured coat is designed to withstand large temperature changes without cracking.

  • High Conductivity—Low Surface resistivity of 250 Ω/sq for one coat (1 mil)
  • Tough and durable coating
  • Carbon does not rub off
  • Stronger adhesion than water based coatings
  • Low VOC’s

Starting at: $19.95

Super Shield 843 Silver Coated Copper Conductive Coating

Super Shield 843 Silver Coated Copper Conductive Coating

A tough and durable EMI and RFI shielding coating.

Starting at: $39.50

Thinner 4351

Thinner 4351

Starting at: $22.95

Thinner 435

Thinner 435

Starting at: $22.95

Super Shield 841 Nickel Conductive Coating Liquid

Super Shield 841 Nickel Conductive Coating

A general purpose EMI and RFI shielding coating.

Starting at: $36.95

Loctite EDAG 440AS  (known as Electrodag 440AS)

Loctite EDAG 440AS (known as Electrodag 440AS)

A conductive nickel coating for EMI shielding.

Starting at: $2,595.00

Solvents are sold in one gallon containers

Solvents

Solvent SB-2 (Bonderite S-FN SB-2 Acheson)- Solvent for DAG 213 Solvent SB-8 - Medium drying. Use on general purpose plastics Solvent SB-10 (Bonderite S-FN SB-10 Acheson) - Slower Drying. Use on solvent sensitive plastics.

Starting at: $109.95

Pint, quart and gallon cans

Bonderite S-FN EB 012 Acheson (known as DAG EB-012)

DAG EB-012 (also known as Electrodag EB-012) is one in a series of graphite-based conductive coatings designed to provide controlled electrical properties. It is designed to provide a conductive, chemical-resistant coating on most metals. It is an aqueous-based, conductive, chemical-resistant coating for lithium batteries.

New Name: Bonderite S-FN EB 012 Acheson

Starting at: $31.95

Quart and Gallon Pails also available in 50lb pail

Bonderite S-FN M 254N Acheson (known as Molydag 254N)

One of a series of resin-bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. Molydag 254N is a synergistic conbination of MoS2 and other lubricants dispersed in an epoxy resin solution. It can be applied by standard brush, dip-spin or spray techniques. Molydag 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. Molydag 254N provides an effective performance, even as a very thin film (0.0003" or 8 microns), thus there is little interference with operating tolerances.

New Name: Bonderite S-FN M 254N Acheson

Starting at: $354.95

Bonderite L-GP 213 Acheson (known as DAG 213)

Bonderite L-GP 213 Acheson (known as DAG 213)

One of a series of resin bonded graphite coatings designed to provide dry film lubrication on many substrates.

New Name: Bonderite L-GP 213 Acheson

Starting at: $25.95

DAG156 - Bonderite L-GP 156 (Known as DAG 156) - 1 pint

DAG156 - Bonderite L-GP 156 (Known as DAG 156) - 1 pint

DAG 156 is specifically formulated to meet Military Specification MIL-L-24131C. It is capable of satisfying the stringent requirements for lubricating the internal and auxiliary equipment mechanisms of commercial and naval nuclear reactor systems.

12 Pint minimum purchase

$69.95

15 Item(s)

per page

Grid List

Set Descending Direction

Electron Microscopy Supplies