My Account

Welcome to our new website!

These molds, made from a special blue-colored silicone rubber, produce flat blocks almost completely trimmed, ready for microtomy. Orientation of specimen material during embedding is easy because the block is flat, and the amount of resin used is small. When hardened, these pre-numbered blocks are easily removed from the mold by flexing it slightly. Flat blocks can be used with most ultra-microtomes.

Buy Pre-Numbered Silicone Rubber Embedding Molds Online

These molds, made from a special blue-colored silicone rubber, produce flat blocks almost completely trimmed, ready for microtomy. Orientation of specimen material during embedding is easy because the block is flat, and the amount of resin used is small. When hardened, these pre-numbered blocks are easily removed from the mold by flexing it slightly. Flat blocks can be used with most ultra-microtomes.

 

Select flat embedding molds available in transparent silicone rubber upon request.

 

We will design and manufacture embedding molds of any shape or dimension to fit your specific needs.

15 Item(s)

per page

Grid List

Set Descending Direction
Double End Mold

21800 - Double End Mold

Each pre-numbered depression 14 mm long x 5 mm wide x 3 mm deep.
$12.95
21838A - Special Silicone Embedding Mold - Six Shallow Blocks

21838A - Special Silicone Embedding Mold - Six Shallow Blocks

Cavity size - 38mm (L) x 30mm (W) x 5mm (H)
$27.95
Special Mold - Nine Tapered-end Blocks

21836 - Special Silicone Embedding Mold - Nine Tapered-end Blocks

Cavity size - 14mm (L) x 12mm (W) x 11mm (H)
$18.95
Special Mold - Four Bar Cavities - Cavity size -  125mm (L) x 12mm (W) x 9mm (H)

21829 - Special Silicone Embedding Mold - Four Bar Cavities

Cavity size - 125mm (L) x 12mm (W) x 9mm (H)
$30.95
Transparent Silicone Rubber Flat Embedding Molds

Transparent Silicone Rubber Flat Embedding Molds

Each standard flat mold cavity is 14 mm long x 5 mm wide x 3 mm deep.

Starting at: $14.95

Chang Monolayer Embedding Mold - 11mm x 22mm cavities

Chang Monolayer Embedding Molds and Glass Coverslips

Molds and coverslips purchased separately.

Starting at: $15.95

Slide Embedding Mold

22350 - Slide Embedding Mold

Produces three 76 mm x 25.4 mm x 2.2 mm epoxy microscope slides.
$24.95
21830 - Plastic Cylinders

21830 - Plastic Cylinders

Precisely formed cylinders 13 mm long x 8 mm diameter, with smooth top surface ready for mounting of Pyramid-Tip blocks (No. 21825). 100 cylinders per package.

$46.95
Pyramid-Tip Silicone Mold

21825 - Pyramid-Tip Silicone Mold

Produces pyramid-tip blocks, which are of great assistance where orientation of specimen material is difficult. The blocks are readily attached to a standard plastic cylinder (No. 21830) with cyanoacrylate glue (SuperGlue). Makes thirty blocks 5 mm high on a 6 mm square base. Tip same as 00 BEEM capsule. Package of 3 molds.

$31.95
SKU: 21810 Round Cavity - 10mm diameter x 1.8mm deep, 12 numbered depressions

Round Cavity Silicone Molds

Come in three different diameters. These molds are made from a special blue-colored silicone rubber. When hardened, these discs are easily removed from the mold by flexing it slightly.

Starting at: $13.95

SKU: 21780 Special Flat Mold - Each depression 14mm long x 3.5mm wide x 2.4mm deep

Special Flat Rectangular Silicone Molds

Available in several depression dimensions. These molds, made from a special blue-colored silicone rubber, produce flat blocks almost completely trimmed, ready for microtomy. Orientation of specimen material during embedding is easy because the block is flat, and the amount of resin used is small. When hardened, these pre-numbered blocks are easily removed from the mold by flexing it slightly. Flat blocks can be used with most ultra-microtomes.

Starting at: $13.95

Standard Flat Rectangular Silicone Mold

Standard Flat Rectangular Silicone Molds

These molds, made from a special blue-colored silicone rubber, produce flat blocks almost completely trimmed, ready for microtomy. Orientation of specimen material during embedding is easy because the block is flat, and the amount of resin used is small. When hardened, these pre-numbered blocks are easily removed from the mold by flexing it slightly. Flat blocks can be used with most ultra-microtomes. Each depression: 14mm long x 5mm wide x 3mm deep.

Starting at: $13.95

Special Mold - Twenty Tapered-end Blocks

21839 - Special Silicone Embedding Mold - Twenty Tapered-end Blocks

Cavity size - 18mm (L) x 6mm (W) x 3mm (H)
$16.95

15 Item(s)

per page

Grid List

Set Descending Direction

Electron Microscopy Supplies