My Account

Welcome to our new website!

Transmission Electron Microscopy Supplies

Buy Transmission Electron Microscopy Supplies Online

Browse and purchase from a large selection of Transmission Electron Microscopy Supplies that are available at Ladd Research. Find wire saws, grinders, embedding molds, evaporators, and more. Order online or call (800) 451-3406.

Items 1 to 30 of 89 total

Page:
  1. 1
  2. 2
  3. 3
per page

Grid List

Set Descending Direction
L660 - Low Speed Diamond Wheel Saw II - Model L660

L660 - Low Speed Diamond Wheel Saw II - Model L660

Low Speed Diamond Wheel Saw for Wheels up to 7" Diameter

The Model L660 is designed to be a multipurpose precision saw using diamond wheels up to 7" in diameter. Its' low speed allows it to cut all materials traditionally cut with a high speed diamond wheel while also cutting very fragile and soft materials with minimal subsurface damage. A variety of sample holders provides a means to mount any shape sample while goniometer adaptability simplifies the cutting of orienting crystals.

Features:

An internal optic sensor and belt drive system eliminate broken gears and sample damage by terminating the cutting process when wheel rotation is impeded. Coolant reservoir is lowered and easily removed by opening an access door located on the front panel.

Note!! Need help deciding which wheels will work for you? See the attachments below for answers to this and other questions you may have concerning our Wheel Saws.
Call For Price
/

L03096 - Tripod Polisher Accessory - Heater Block

A large square aluminum block which is designed to be used on a hot plate. The block provides a stable platform onto which the L brackets can be placed and heated to the proper temperature for mounting specimens.
$65.00
/

L03075 - Tripod Polisher Accessory - Microscope Stand

Designed to hold the Tripod Polisher upside down to allow for viewing the specimen under a dissecting microscope. The stand can also be used as a storage device in between processing steps.
$65.00
/

L070501 - Tripod Polisher Accessory - Glass Leveling Slide (2 each)

For leveling the L590TS.
$6.50
The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Tripod Polisher for TEM and SEM & Accessories

The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The following accessories are included at no charge with the purchase of the L590TS. (prices are included if you wish to purchase additional accessories)

Starting at: $6.50

Tripod Polisher for TEM

Tripod Polisher for TEM & Accessories

The Tripod Polisher, L590TEM, comes complete with sufficient accessories to prepare samples for transmission electron microscopy (TEM). The following accessories are included at no charge with the purchase of the L590TEM. (prices are included if you wish to purchase additional accessories)

Starting at: $6.50

The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Tripod Polisher for SEM & Accessories

The Tripod Polisher, L590SEM, comes complete with sufficient accessories to prepare samples for scanning electron microscopy (SEM). The following accessories are included at no charge with the purchase of the L590SEM. (prices included if you wish to purchase additional accessories)

Starting at: $6.50

Optional Tripod Polisher Accessory - Diamond Lapping Film

Optional Tripod Polisher Accessory - Diamond Lapping Film

All discs 8" in diameter with pressure sensitive adhesive

Starting at: $137.00

"Holey" Film

"Holey" Film

3.0 mm diameter. Comes in 200 or 300 mesh, either copper or molybdenum

Starting at: $18.25

12030 - Calibrating Carbon

12030 - Calibrating Carbon

Where surface roughness studies are necessary, these spherical particles, lying in the range of 100-500 nm, are invaluable. Shadows of these particles accurately calibrate every area being examined. Also, the shadows may be used to calculate elevations and depressions. Complete instructions for use included.
$8.95
40810 - Gold Shadowed Latex

40810 - Gold Shadowed Latex

Latex spheres are 0.234 µm in diameter.
$27.95
L650 - Low Speed Diamond Wheel Saw I - Model 650

L650 - Low Speed Diamond Wheel Saw I - Model 650

Low Speed Diamond Wheel Saw for 3" or 4" Wheels

The Model L650 Low Speed Diamond Wheel Saw is a compact, multipurpose, precision saw designed to cut a wide variety of materials with minimal subsurface damage. Its' low speed makes it possible to cut fragile materials that would otherwise fracture and soft materials that would load the diamond wheel on a higher speed saw. A variety of sample holders provides a means for mounting any shape sample while goniometer adaptability simplifies cutting oriented crystals.

Features:

- Belt drive system eliminates gear breakage which is common with less reliable fiber gear driven designs.
- Coolant reservoir is lowered and easily removed by opening an access door on the front panel.
- Both coarse and fine sample position adjustment.

Note!! Need help deciding which wheels will work for you? See the attachments below for answers to this and other questions you may have concerning our Wheel Saws.
$5,195.00
L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

The SEM stub mount is designed specifically for mounting specimens for SEM polishing. It fits directly into the stage of most standard SEM stages and eliminates the need for remounting the specimen prior to SEM observation. Included at no charge with the purchase of the BiPod Polisher.
$67.50
/

L0307601 - Tripod Polisher Accessory - Pyrex Wedge Polishing Stub

Used with L03077 Wedge Polishing Clamp.
$19.00
Thallous Chloride Diffraction Standard

40825 - Thallous Chloride Diffraction Standard

Standard grid is 3.05mm 200 mesh copper.
$26.95
Molybdenum Oxide Diffraction Standard

40830 - Molybdenum Oxide Diffraction Standard

Standard grid is 3.05mm 200 mesh copper.
$30.95
40700 - Low Magnification Carbon Grating

40700 - Low Magnification Carbon Grating

200 mesh copper grid. A germanium-shadowed carbon replica of a ruled diffraction grating having 15,240 lines per inch, with actual grating spacing of 1667 nm. Useful for low magnification work with electron microscopes.
$48.95
40710 - Intermediate Magnification Carbon Grating

40710 - Intermediate Magnification Carbon Grating

200 mesh copper grid. A germanium-shadowed carbon replica of a ruled diffraction grating having 28,800 lines per inch, with actual grating spacing of 882 nm.
$49.95
40720 - High Magnification Carbon Grating

40720 - High Magnification Carbon Grating

300 mesh copper grid. A germanium-shadowed carbon replica of a ruled diffraction grating having 54,864 lines per inch, actual grating spacing of 463 nm. Of particular value in high magnification work where the 28,800 line grating presents too few lines for accurate measurement.
$51.95
Polystyrene Latex Spheres

Polystyrene Latex Spheres

Available in many diameters. Note: Particle sizes may vary somewhat from those listed. Exact size listed on each vial.

Now Available!! In addition to the standard latex spheres listed below, we now offer NIST traceable polystyrene latex spheres in various sizes. Certificate of Compliance available. Please call us for details.
Please Note!! During the winter months these items must be shipped via next day air to minimize the chance of freezing.

Starting at: $32.95

Mag*I*Cal TEM Calibration Standard

40701 - Mag*I*Cal TEM Calibration Standard

Performs all of the three major instrument calibrations for a TEM: image magnification; camera constant for indexing diffraction patterns; and image/diffraction pattern rotation for relating crystal directions to features in the image.
$1,375.00
/

Tripod Polisher Accessory - Slotted L Bracket - L03090 - L03090

The most commonly used bracket. It has a slot through the front to accommodate the Pyrex inserts for wedge polishing, the SEM stub mount, as well as the L59002 Wedge Polishing Mount.
$190.00
/

L03094 - Tripod Polisher Accessory - Plain L Bracket

Designed specifically for doing the first side polishing of TEM specimens. However, the plain L bracket can be used for polishing SEM cross sections if additional mounting prior to microscope viewing is to be done.
$115.00
/

L03067 - Tripod Polisher Accessory - Screw Clamp L Bracket

This bracket has a set screw on each side of the bracket which is designed to hold an SEM mount in place.
$135.00
L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

Similar in function to the Pyrex insert. Specimens are mounted to the rod for wedge polishing applications. Included at no charge with the purchase of the BiPod Polisher.
$27.00
L03065 - Polisher Accessory - Pyrex Insert - Large

L03065 - Polisher Accessory - Pyrex Insert - Large

This insert is a glass stub used for TEM polishing of specimens. It is used in conjunction with the slotted L bracket and is used for wedge polishing applications. Not included with the purchase of the BiPod Polisher.
$23.00
Stainless Steel Wire Blades for Model L850 Wire Saw

Stainless Steel Wire Blades for Model L850 Wire Saw

Stainless Steel Wire Blades for Model L850 Wire Saw at 0.010" and 0.015" available in bundles of 10, 50 and 100.

Starting at: $99.00

Diamond Wire Blades for Model L850 Wire Saw

Diamond Wire Blades for Model L850 Wire Saw

Diamond Wire Blades for Model L850 Wire Saw at 0.010" and 0.015" available in bundles of 5, 25 and 100.

Starting at: $167.00

L865 - Diamond Band Saw - Model 865

L865 - Diamond Band Saw - Model 865

The lightweight Model L865 Diamond Band Saw is designed for medium precision and efficient cutting of hard and brittle materials. Included Parts: - Diamond Band Saw - Diamond Band Saw Blade - Blade Guides (3 each)
$1,225.00

Items 1 to 30 of 89 total

Page:
  1. 1
  2. 2
  3. 3
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies