My Account

Welcome to our new website!

Buy Polishers Online at Ladd Research

Ladd Research is a supplier of polishers, specifically for Tripods and Bipods. Polishers and accessories available online at Ladd Research. Order online or call (800) 451-3406.

29 Item(s)

per page

Grid List

Set Descending Direction
LEBSD150 Polishing & Storage Kit Includes: Pre-tilt EBSD stage, 3 height segments, 2 mounting blocks for SEM stubs, 10 SEM stubs, 2 Tripod SEM stubs, Model L150 lap fixture, SampleSaver container with two tier rack, 2 stems for holding mounting blocks in

EBSD (Electron Backscatter Diffraction) Polishing and Storage Kit

The LEBSD (Electron Backscatter Diffraction) Specimen Polishing Kit is based on the Model L150 micrometer controlled lapping fixture. Two mounting blocks are included to hold a 1/8" diameter pin SEM mount for plan view preparation of a Tripod Polisher SEM mount for XSEM preparation. The stubs are secured into the block with a set screw prior to loading into the lapping fixture. The kit includes a SampleSaver FIB storage container and two tier locking rack, and pin adapters for holding the L150 mounts. A pre-tilt EBSD specimen stage is included with three height segments. The low profile mount fits most SEM load locks and can be stored in the Sample Saver without removal from the pre-tilt holder. Special Features A relatively simple and inexpensive method for mechanically polishing and mounting EBSD specimens on an SEM stub, allowing quick transfer without dismounting a prepared sample. Pre-Tilt EBSD specimen stage keeps sample at a fixed angle of 70o or the complementary angle of 20o in the chamber. The process utilizes conventional, easily available, precision abrasives and is compatible with other sample preparation equipment and consumables. The Model L150 Lapping Fixture can be utilized for other routine parallel and angled polishing processes without modification. Up to 1.25" diameter mounting blocks are available. A low force Model L150L lapping fixture is available as an option. Complete process recipes, consumable supplies, and other accessories are available and include hand lapping tray, lapping and polishing machines, hot plate/cooling tray and sample mounting devices.

Starting at: $79.95

/

L03075 - Tripod Polisher Accessory - Microscope Stand

Designed to hold the Tripod Polisher upside down to allow for viewing the specimen under a dissecting microscope. The stand can also be used as a storage device in between processing steps.
$65.00
/

L070501 - Tripod Polisher Accessory - Glass Leveling Slide (2 each)

For leveling the L590TS.
$6.50
The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Tripod Polisher for TEM and SEM & Accessories

The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The following accessories are included at no charge with the purchase of the L590TS. (prices are included if you wish to purchase additional accessories)

Starting at: $6.50

Tripod Polisher for TEM

L590TEM - Tripod Polisher for TEM

Base with 3 micrometer assemblies, hex driver set, sample mounting wax and case.
$1,595.00
Tripod Polisher for TEM

Tripod Polisher for TEM & Accessories

The Tripod Polisher, L590TEM, comes complete with sufficient accessories to prepare samples for transmission electron microscopy (TEM). The following accessories are included at no charge with the purchase of the L590TEM. (prices are included if you wish to purchase additional accessories)

Starting at: $6.50

Tripod Polisher for TEM

L590SEM - Tripod Polisher for SEM

Base with 3 micrometer assemblies, hex driver set, sample mounting wax and case.
$1,045.00
The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Tripod Polisher for SEM & Accessories

The Tripod Polisher, L590SEM, comes complete with sufficient accessories to prepare samples for scanning electron microscopy (SEM). The following accessories are included at no charge with the purchase of the L590SEM. (prices included if you wish to purchase additional accessories)

Starting at: $6.50

/

L03096 - Tripod Polisher Accessory - Heater Block

A large square aluminum block which is designed to be used on a hot plate. The block provides a stable platform onto which the L brackets can be placed and heated to the proper temperature for mounting specimens.
$65.00
L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

The SEM stub mount is designed specifically for mounting specimens for SEM polishing. It fits directly into the stage of most standard SEM stages and eliminates the need for remounting the specimen prior to SEM observation. Included at no charge with the purchase of the BiPod Polisher.
$67.50
L590TS - Tripod Polisher for TEM and SEM

L590TS - Tripod Polisher for TEM and SEM

Base with 3 micrometer assemblies, hex driver set, sample mounting wax and case.
$1,725.00
/

Tripod Polisher Accessory - Slotted L Bracket - L03090 - L03090

The most commonly used bracket. It has a slot through the front to accommodate the Pyrex inserts for wedge polishing, the SEM stub mount, as well as the L59002 Wedge Polishing Mount.
$190.00
/

L03094 - Tripod Polisher Accessory - Plain L Bracket

Designed specifically for doing the first side polishing of TEM specimens. However, the plain L bracket can be used for polishing SEM cross sections if additional mounting prior to microscope viewing is to be done.
$115.00
/

L03067 - Tripod Polisher Accessory - Screw Clamp L Bracket

This bracket has a set screw on each side of the bracket which is designed to hold an SEM mount in place.
$135.00
L03077 - Polisher Accessory - Wedge Polishing Clamp

L03077 - Polisher Accessory - Wedge Polishing Clamp

Used with L03090 or L03067 and clamps the small pyrex rods into the L590. The clamp is anodized aluminum and squeezes against the pyrex rod, holding it in place. Included at no charge with the purchase of the BiPod Polisher.
$60.00
L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

Similar in function to the Pyrex insert. Specimens are mounted to the rod for wedge polishing applications. Included at no charge with the purchase of the BiPod Polisher.
$27.00
L03065 - Polisher Accessory - Pyrex Insert - Large

L03065 - Polisher Accessory - Pyrex Insert - Large

This insert is a glass stub used for TEM polishing of specimens. It is used in conjunction with the slotted L bracket and is used for wedge polishing applications. Not included with the purchase of the BiPod Polisher.
$23.00
/

L0307601 - Tripod Polisher Accessory - Pyrex Wedge Polishing Stub

Used with L03077 Wedge Polishing Clamp.
$19.00
L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

Designed specifically for wedge polishing of TEM specimens. the mount consists of a small aluminum clamping mechanism and 5 Pyrex rods which slide into the center of the clamp and are held in place when the L-bracket is tightened. Not included with the purchase of the BiPod Polisher.
$150.00
/

L03145 - BiPod Polisher Accessory - Foot for BiPod Polisher

Priced at $21.00 individually. Included at no charge with the purchase of the BiPod Polisher.
$21.00
/

L03768 - BiPod Polisher Accessory - L Bracket

For holding sample securely in BiPod Polisher. Included at no charge with the purchase of the BiPod Polisher.
$102.00
Optional Tripod Polisher Accessory - Diamond Lapping Film

Optional Tripod Polisher Accessory - Diamond Lapping Film

All discs 8" in diameter with pressure sensitive adhesive

Starting at: $137.00

L03060 - Optional Tripod Polisher Accessory - Parallel Polishing Mount

L03060 - Optional Tripod Polisher Accessory - Parallel Polishing Mount

A round aluminum disc with a Pyrex rod mounted into the center of the disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens.
$72.00
L03061 - Optional Tripod Polisher Accessory - Planarizing Tool

L03061 - Optional Tripod Polisher Accessory - Planarizing Tool

This tool is a large square piece of aluminum used to planarize the delrin feet of the Tripod Polisher.
$228.00
L03080 - Optional Tripod Polisher Accessory - Parallel Polishing Mount, Stainless Steel

L03080 - Optional Tripod Polisher Accessory - Parallel Polishing Mount, Stainless Steel

A round stainless steel disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens. 1.25" Diameter
$43.00
L59001 - Optional Tripod Polisher Accessory - Ion Mill Stage

L59001 - Optional Tripod Polisher Accessory - Ion Mill Stage

Designed to accept the special SEM stud used with the Tripod Polisher. The SEM stud is mounted in the Ion Mill Stage and sample is briefly ion milled to remove fine scratches, polishing debris and to give surface topography prior to SEM analysis.
$205.00
L03068 - Optional Tripod Polisher Accessory - X-section L-bracket

L03068 - Optional Tripod Polisher Accessory - X-section L-bracket

This bracket utilizes a small clamping mechanism on the face of the bracket to allow samples to be clamped without the need for using mounting waxes.
$157.00
L595 BiPod Polisher

BiPod Polisher and Accessories

    Specifications:
  • Dimensions: 2.5"W x 2.75"D x 1.75" H
  • Weight: 6 ounces

Starting at: $21.00

29 Item(s)

per page

Grid List

Set Descending Direction

Electron Microscopy Supplies