My Account

Welcome to our new website!

Transmission Electron Microscopy Supplies

Buy Transmission Electron Microscopy Supplies Online

Browse and purchase from a large selection of Transmission Electron Microscopy Supplies that are available at Ladd Research. Find wire saws, grinders, embedding molds, evaporators, and more. Order online or call (800) 451-3406.

Items 61 to 89 of 89 total

Page:
  1. 1
  2. 2
  3. 3
per page

Grid List

Set Descending Direction
40800 - Catalase Crystals

40800 - Catalase Crystals

Crystals of bovine liver catalase are recommended as an internal standard of length in the electron microscope. Absolute sizes in the magnification range of 10,000 X to 150,000 X may be determined with an accuracy of +/- 2.5% and relative sizes with an accuracy of +/- 1.5%. Based on experimental data, the principal catalase lattice spacing is 172 +/- 4 Angstroms. Lattice lines separated by half this distance are used in actual size determinations. Crystals are suspended in antibacterial solution. Sealed in 10 ml glass vial.
$66.95
L03060 - Optional Tripod Polisher Accessory - Parallel Polishing Mount

L03060 - Optional Tripod Polisher Accessory - Parallel Polishing Mount

A round aluminum disc with a Pyrex rod mounted into the center of the disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens.
$72.00
L03061 - Optional Tripod Polisher Accessory - Planarizing Tool

L03061 - Optional Tripod Polisher Accessory - Planarizing Tool

This tool is a large square piece of aluminum used to planarize the delrin feet of the Tripod Polisher.
$228.00
L03080 - Optional Tripod Polisher Accessory - Parallel Polishing Mount, Stainless Steel

L03080 - Optional Tripod Polisher Accessory - Parallel Polishing Mount, Stainless Steel

A round stainless steel disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens. 1.25" Diameter
$43.00
L59001 - Optional Tripod Polisher Accessory - Ion Mill Stage

L59001 - Optional Tripod Polisher Accessory - Ion Mill Stage

Designed to accept the special SEM stud used with the Tripod Polisher. The SEM stud is mounted in the Ion Mill Stage and sample is briefly ion milled to remove fine scratches, polishing debris and to give surface topography prior to SEM analysis.
$205.00
L03068 - Optional Tripod Polisher Accessory - X-section L-bracket

L03068 - Optional Tripod Polisher Accessory - X-section L-bracket

This bracket utilizes a small clamping mechanism on the face of the bracket to allow samples to be clamped without the need for using mounting waxes.
$157.00
Tripod Polisher for TEM

L590SEM - Tripod Polisher for SEM

Base with 3 micrometer assemblies, hex driver set, sample mounting wax and case.
$1,045.00
Tripod Polisher for TEM

L590TEM - Tripod Polisher for TEM

Base with 3 micrometer assemblies, hex driver set, sample mounting wax and case.
$1,595.00
L03077 - Polisher Accessory - Wedge Polishing Clamp

L03077 - Polisher Accessory - Wedge Polishing Clamp

Used with L03090 or L03067 and clamps the small pyrex rods into the L590. The clamp is anodized aluminum and squeezes against the pyrex rod, holding it in place. Included at no charge with the purchase of the BiPod Polisher.
$60.00
L590TS - Tripod Polisher for TEM and SEM

L590TS - Tripod Polisher for TEM and SEM

Base with 3 micrometer assemblies, hex driver set, sample mounting wax and case.
$1,725.00
LEBSD150 Polishing & Storage Kit Includes: Pre-tilt EBSD stage, 3 height segments, 2 mounting blocks for SEM stubs, 10 SEM stubs, 2 Tripod SEM stubs, Model L150 lap fixture, SampleSaver container with two tier rack, 2 stems for holding mounting blocks in

EBSD (Electron Backscatter Diffraction) Polishing and Storage Kit

The LEBSD (Electron Backscatter Diffraction) Specimen Polishing Kit is based on the Model L150 micrometer controlled lapping fixture. Two mounting blocks are included to hold a 1/8" diameter pin SEM mount for plan view preparation of a Tripod Polisher SEM mount for XSEM preparation. The stubs are secured into the block with a set screw prior to loading into the lapping fixture. The kit includes a SampleSaver FIB storage container and two tier locking rack, and pin adapters for holding the L150 mounts. A pre-tilt EBSD specimen stage is included with three height segments. The low profile mount fits most SEM load locks and can be stored in the Sample Saver without removal from the pre-tilt holder. Special Features A relatively simple and inexpensive method for mechanically polishing and mounting EBSD specimens on an SEM stub, allowing quick transfer without dismounting a prepared sample. Pre-Tilt EBSD specimen stage keeps sample at a fixed angle of 70o or the complementary angle of 20o in the chamber. The process utilizes conventional, easily available, precision abrasives and is compatible with other sample preparation equipment and consumables. The Model L150 Lapping Fixture can be utilized for other routine parallel and angled polishing processes without modification. Up to 1.25" diameter mounting blocks are available. A low force Model L150L lapping fixture is available as an option. Complete process recipes, consumable supplies, and other accessories are available and include hand lapping tray, lapping and polishing machines, hot plate/cooling tray and sample mounting devices.

Starting at: $79.95

Aluminum Diffraction Standard

40760 - Aluminum Diffraction Standard

Standard grid is 3.05mm 200 mesh copper.
$24.95
40805 - Ferritin

40805 - Ferritin

If your instrument can resolve the tetrad of this protein molecule it has better than 12.5 Angstroms resolution. Supplied as a pure suspension dispersed upon a formvar substrate.
$37.95
40795 - Carbon Test Specimen

40795 - Carbon Test Specimen

A high resolution test specimen consisting of a graphitized ISAF carbon black dispersed on "lacey" carbon film supported by a 200 mesh grid. The carbon black chains bridge openings in the film so there is no substrate to interfere with resolution tests. Imaging of the 3.4 Angstrom lattice spacing of the carbon, along with the curved regions and dislocations, permit magnification calibration and check the performance of high resolution electron microscopes.
$46.95
/

L03768 - BiPod Polisher Accessory - L Bracket

For holding sample securely in BiPod Polisher. Included at no charge with the purchase of the BiPod Polisher.
$102.00
LD500i - D500i Dimpler

LD500i - D500i Dimpler

The Model LD500i Dimpler has become an indispensable tool for TEM specimen preparation. The dimpling technique, applicable to a myriad of material types, yields a higher quality specimen with a broader, near electron transparent area which reduces ion milling times. The Model LD500i automates the dimpling technique so that the most demanding specimens can be dimpled to < 10 microns routinely and repeatably. Real time measurement of tool height, specimen thickness, and tool runout allow the user to precisely control the dimpling process. With the proper tooling and parameter adjustment, the dimpling technique with the LD500i can be completed with ease.
Call For Price
Cutting Wheels for Low Speed Diamond Wheel Saw II

Cutting Wheels for Low Speed Diamond Wheel Saw II

Cutting wheels for the Low Speed Diamond Wheel Saw II available in a variety of concentrations and sizes.

Starting at: $280.00

Arbor Spacers for Low Speed Diamond Wheel Saw II

Arbor Spacers for Low Speed Diamond Wheel Saw II

Arbor Spacers for the Low Speed Diamond Wheel Saw II available in sizes 1", 0.125", 0.5" and 1.5".

Starting at: $49.95

Mounting Wax for Low Speed Diamond Wheel Saw II

Mounting Wax for Low Speed Diamond Wheel Saw II

Soft, Tan: - 52° C melting point - 1 stick - 1" x 1" x 7.5" - 113 grams
Moderate Hardness, Orange: - 70° C melting point - 29 sticks - 6 mm x 100 mm - 100 grams
Hard, Clear: - 135° C melting point - 20 pieces - 3.5" x 0.5" x 0.5" - 350 grams
Hard, Clear, Long: - 135° C melting point - 10 pieces - 7" x 1" x 0.87" - 450 grams

Starting at: $39.95

Miscellaneous Spare Parts and Consumables for Low Speed Diamond Wheel Saw II

Miscellaneous Spare Parts and Consumables for Low Speed Diamond Wheel Saw II

Various spare parts and consumables for the Low Speed Diamond Wheel Saw II. Coolant Reservoir for Low Speed Diamond Wheel Saws I & II is made to used with the Coolant Reservoir.

Starting at: $22.95

L260 - 3-Axis Goniometer - Model 260

L260 - 3-Axis Goniometer - Model 260

Used to hold crystals in the process of determining crystallographic orientation using either Laue back reflection or optical orientation techniques. For Low Speed Diamond Wheel Saw II - Model L660 and Wire Saw - Model L850
$4,800.00
L250 - 2-Axis Goniometer - Model 250

L250 - 2-Axis Goniometer - Model 250

Used to hold crystals in the process of determining crystallographic orientation using either Laue back reflection or optical orientation techniques. For Low Speed Diamond Wheel Saw II - Model L660 and Wire Saw - Model L850
$2,279.00
L66001 - Single Axis Goniometer for Low Speed Diamond Wheel Saw II

L66001 - Single Axis Goniometer for Low Speed Diamond Wheel Saw II

Has a graduated scale with a 360° vernier and can be rotated 360°.
$420.00
Cutting Wheels for Low Speed Diamond Wheel Saw I

Cutting Wheels for Low Speed Diamond Wheel Saw I

Cutting wheels for the Low Speed Diamond Wheel Saw I available in a variety of concentrations and sizes.

Starting at: $35.50

Precision Collars for Low Speed Diamond Wheel Saws I & II

Precision Collars for Low Speed Diamond Wheel Saws I & II

Precisions collars for the Low Speed Diamond Wheel Saw I available in sizes 2.40", 1.87" and 1.37"

Starting at: $65.95

Miscellaneous Spare Parts and Consumables for Low Speed Diamond Wheel Saw I

Miscellaneous Spare Parts and Consumables for Low Speed Diamond Wheel Saw I

Various spare parts and consumables for the Low Speed Diamond Wheel Saw I

Starting at: $4.75

L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

Designed specifically for wedge polishing of TEM specimens. the mount consists of a small aluminum clamping mechanism and 5 Pyrex rods which slide into the center of the clamp and are held in place when the L-bracket is tightened. Not included with the purchase of the BiPod Polisher.
$150.00
/

L03145 - BiPod Polisher Accessory - Foot for BiPod Polisher

Priced at $21.00 individually. Included at no charge with the purchase of the BiPod Polisher.
$21.00
10825 - Amyl Acetate - 120 ml

10825 - Amyl Acetate - 120 ml

120 ml
$17.95

Items 61 to 89 of 89 total

Page:
  1. 1
  2. 2
  3. 3
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies