MATERIAL SAFETY DATA SHEET

 

Product Name: Lowicryl K11M Kit

Catalog Number: 21260

                        Formula: Kit is composed of Monomers (methacrylic and acrylic esters), Crosslinker   (triethyleneglycol dimethacrylate) and Initiator (benzoin methyl ether)

DOT Hazard Class: 6.1

DOT Proper Shipping Name: Toxic Liquids, n.o.s.

UN/NA ID No.: UN2810

MSDS Updated: 9/16/05

 

Distributed By: Ladd Research

                            83 Holly Court

                            Williston, VT 05495

                            (802) 658-4961

 

HAZARDOUS COMPONENTS

                                                           CAS Number     Percent      Exposure Limits

Monomers                                                      Not Available       100%         None Established

Crosslinker                                                   Not Available       100%         None Established

Initiator                                                                          

 

PHYSICAL AND CHEMICAL DATA (for Monomer)

Boiling Point: >186EC

% Volatile by Volume: No data

Specific Gravity: 1.015

Solubility in Water: Miscible

Appearance and Odor: Colorless liquid. Slightly acrylic odor (Monomer and Crosslinker); White powder (Initiator).

 

FIRE AND EXPLOSION HAZARD DATA

Flash Point: 79E C

Test Mode: Open cup.

Flammable Limits: No Data Available

Extinguishing Media: Water, carbon dioxide, foam

Special Fire Fighting Procedures: Firefighters must wear self-contained breathing apparatus and fully protective equipment.

 

HEALTH HAZARD DATA

Effects of Overexposure: Irritant. Lachrymator: May cause severe irritation to skin, eyes, and respiratory system. The initiator is toxic by ingestion, absorption or inhalation. Vapors may irritate eyes and may cause skin irritation and allergenic sensitivity.

 

EMERGENCY AND FIRST AID

Skin: Wash affected area with copious amounts of water.

Eye: Flush eyes with water for at least 30 minutes. See physician.

Inhalation: Remove to fresh air. Give oxygen or artificial respiration as needed. Call physician.

Ingestion: Give large amounts of water or milk and transport to medical facility.

 

REACTIVITY DATA

Stability: Unstable.

Conditions to Avoid: Exposure to high temperature and UV light and free radical initiators.

Incompatibility: Oxidizing material, peroxides.

Hazardous Decomposition Products: Carbon monoxide, carbon dioxide.

Hazardous Polymerization: May occur.

Conditions to Avoid: Exposure to high temperature, UV light, initiators.

 

SPILL, DISPOSAL AND STORAGE INFORMATION

Spill: Wear self-contained breathing apparatus, rubber boots and gloves. Absorb with clay, earth, etc. and collect solid waste for disposal. Wash and ventilate spill site after pickup is complete.

Waste Disposal: Mix waste with a combustible carrier and burn in a suitably equipped chemical incinerator. Disposal must comply with federal, state and local regulations.

Storage: Store material in dark brown bottles away from light, heat or initiators.

 

PROTECTIVE EQUIPMENT AND CONTROL MEASURES

Respiratory: OSHA/MSHA approved respirator.

Ventilation: Fume hood.

Gloves: Impervious

Eye: Safety goggles or full face respirator.

Other: Safety shower and eye bath.

 

SECTION 313 SUPPLIER NOTIFICATION

Not applicable.

 

v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v

 

The information presented is believed to be correct and is the most accurate information available to us at this time.  However, Ladd Research makes no warranty, express or implied, and assumes no liability for this information and the product described herein.