MATERIAL SAFETY DATA SHEET

Product Name: Lad-o-Lac

Catalog Number: 71000

Chemical Family: Lacquers

DOT Hazard Class: Flammable Liquid (3)

DOT Proper Shipping Name: Ethyl Acetate Solution

UN/NA ID No.: UN1173

MSDS Updated: 9/2009

Distributed By: Ladd Research Industries

83 Holly Court

Williston, VT 05495

(802) 658-4961

HAZARDOUS COMPONENTS

CAS Number Percent Exposure Limits

Ethyl Acetate 141-78-6 87.8(w/w) 400 ppm (OSHA PEL)

Dibutyl Phthalate 84-74-2 2.1(w/w) 5mg/m³ (OSHA PEL)

Cellulose Acetate Propionate 9004-39-1 10.1 (w/w) Not determined

PHYSICAL AND CHEMICAL DATA

Boiling Point: 77EC

Specific Gravity: 0.9

Vapor Pressure: 73 mm Hg @ 20EC

Vapor Density: 3.04

Melting Point: -83.6EC

Solubility in Water: Slight

Appearance and Odor: Clear, fragrant, viscous liquid

FIRE AND EXPLOSION DATA

Flash Point: -4.4EC (Closed Cup)

Autoignition Temperature: 426EC

Lower Explosive Limit: 2.2% in air

Upper Explosive Limit: 11.5% in air

Extinguishing Media: Carbon dioxide, dry chemical, alcohol or polymer foam

Unusual Fire and Explosion Hazards: Forms explosive mixtures in air. Unvented vapors may

flash back from ignition sources. Containers heated under fire conditions may explode.

HEALTH HAZARD DATA

Primary Routes of Entry: Inhalation, skin absorption

Inhalation: Irritation to nose and throat. May cause nausea, vomiting, narcotic effect

Skin: Dryness, irritation. May be absorbed through skin.

Eye: Possibly severe irritation.

EMERGENCY AND FIRST AID

Inhalation: Remove to fresh air. Administer artificial respiration if not breathing. Seek medical

attention.

Skin: Wash with soap and water until no sign of the material remains.

Eye: Rinse eyes with copious amounts of water. Seek medical attention if symptoms persist.

REACTIVITY DATA

Stability: Stable under normal conditions.

Hazardous Polymerization: Will not occur.

Conditions to avoid: Ignition sources, high temperatures, moisture.

Incompatibility: Oxidizers, acids, bases, lithium aluminum hydride.

Hazardous decomposition products: Carbon dioxide, carbon monoxide

SPILL, DISPOSAL AND STORAGE INFORMATION

In Case of Spill: Shut off ignition sources. Absorb on inert material and place in an impervious

container. Seal and label for disposal. Ventilate area and wash spill area with water.

Disposal: Consult local, state and federal regulations

Storage: Store in cool, dry area away from ignition sources. Open only in well ventilated areas

such as in a chemical fume hood.

PROTECTIVE EQUIPMENT AND CONTROL MEASURES

Ventilation: Chemical fume hood recommended

Respiratory Protection: OSHA/MSHA-approved organic vapor respirator if TLV is exceeded.

Gloves: Impervious rubber.

Eye: Chemical splash goggles

SECTION 313 SUPPLIER NOTIFICATION

Not applicable.

(((((((((((((((((((((((((((((((((((((((((((((((((((((((((

The information presented is believed to be correct and is the most accurate information available to us at this time. However, Ladd Research makes no warranty, express or implied, and assumes no liability for this information and the product described herein.