Scanning Electron Microscopy Supplies | SEM & TEM Apertures

JEOL Three Hole Strip Apertures - Platinum

3 Hole Oval Platinum (Platinum:Iridium 95:5) Strips 9.0mm long X 2.35mm wide X 0.10mm thick.

We can manufacture any hole size in any combination you require. Please e-mail your specifications if you don't find what you need below.

Starting at: $550.00

Carbon Tabs

Available in many sizes and with or without adhesive.

Starting at: $31.95

Nonconductive Lift-n-Press Adhesive Tabs

14445 - Adhesive Tabs

Package of 72 sheets of 36 tabs each. Tabs measure 12 mm in diameter. Use for adhering specimen to mount. Non-conducting.

$37.95

14443 - Conductive Lift-n-Press Adhesive Tabs

Each roll (one order) contains approximately 250 tabs. Composed of a thin film of strong adhesive approximately 1/2" in diameter. Over 99% transparent to EDS. For small samples, tabs can be cut to the desired size before removing the tab from the backing sheet.

$44.95

Carbon Adhesive Tape - Double-Coated

Available in many widths and dimensions.

Starting at: $29.95

60527 - Carbon Adhesive Sheets

Double-coated, 5cm x 12cm x 0.16mm thick, package of 10.

$128.95

Conductive Copper Tape

Single sided, single sided 3M and double-coated varieties. Available in 18 yds x 1/4" or 18 yds x 1/2".

Starting at: $23.95

3M Aluminum Tape

Available in 18 yds x 1/4" or 18 yds x 1/2".

Starting at: $26.95

53159 - Silver Coated Polyester Tape

3/8" wide X 72 yards.

$51.95

Aperture Cleaning Kits

Aperture Cleaning Kits
For cleaning all platinum aperture strips and discs.

Small Aperture Cleaning Kit - Contents:

- Small Flamer
- Mini Butane Torch
- Pig's Eyelash - for particle removal
- Sable Brush (package of 3) - for particle removal

Large Aperture Cleaning Kit - Contents:

- Large Flamer
- Mini Butane Torch
- Pig's Eyelash - for particle removal
- Sable Brush (package of 3) - for particle removal

Starting at: $480.00

ETEC Electron Microscope Disc Apertures, 6.35 mm x 0.125 mm Disc Size

ETEC Electron Microscope Disc Apertures Disc sizes - 6.35 mm x 0.125 mm

Starting at: Call For Price

55500NC - JEOL Noise Canceling Electron Microscope Disc Aperture

Disc Size - 6mm x 0.001" Platinum 500µm

$107.00

Oval JEOL Four Hole Strip Apertures - Molybdenum

4 Hole Oval Molybdenum Strips 10.0mm long X 5.0mm wide X 0.10mm thick.

We also offer similar strips in Platinum. Please click HERE for Platinum apertures.

We can manufacture any hole size in any combination you require. Please e-mail your specifications if you don't find what you need below.

Starting at: $505.00

JEOL / ISI Four Hole Strip Apertures - Platinum

4 Hole Platinum (Platinum:Iridium 95:5) Strips 17.0mm long X 5.0mm wide X 0.10mm thick.

We also offer similar strips in Molybdenum. Please click HERE for molybdenum apertures.

We can manufacture any hole size in any combination you require. Please e-mail your specifications if you don't find what you need below.

Starting at: $585.00

JEOL / ISI Four Hole Strip Apertures - Molybdenum

4 Hole Molybdenum Strips 17.0mm long X 5.0mm wide X 0.10mm thick.

We also offer similar strips in Platinum. Please click HERE for platinum apertures.

We can manufacture any hole size in any combination you require. Please e-mail your specifications if you don't find what you need below.

Starting at: $585.00

Hitachi Four Hole Strip Apertures - Molybdenum

45mm long X 4mm wide X 0.1mm thick for Hitachi H600, H59, S520, H11 microscopes and more.

We also make similar strips in platinum. Click HERE for Pt strip apertures.

We can manufacture any hole size in any combination you require. Please e-mail your specifications if you don't find what you need below.

Starting at: Call For Price

X-Checker for SEM-EDS

The X-Checker is a calibration aid to help monitor the performance of an EDS X-ray system on an SEM. The X-Checker contains a series of standard materials on a 1" diameter aluminum stub. With the X-Checker, the investigator can check detector resolution and calibration, test for contamination on the detector window, monitor low-end sensitivity and calibrate image analysis software.

Starting at: $635.00

Sample Holders for FEI, Topcon & Hitachi Microscopes

All holders on this page can fit both Series I and Series II Model 4800 scopes.

Starting at: Call For Price

Sample Holders for Hitachi S4800 Microscope

Sample holders for Hitachi 4500/4700 and 4800 also available for use in Hitachi S3400. Price same as holders for the Hitachi 4800.

Starting at: Call For Price

Sample Holders for Hitachi S4500 & S4700 Microscopes

For Hitachi S4500 & S4700 Microscopes.

Starting at: $175.00

Leo, Ziess, & JEOL Thin Apertures

Disc size - 2mm x 0.1mm (thin apertures) Platinum or Molybdenum Need a hole size not listed here? We manufacture our apertures in house so we can provide any hole size you require. Please call for pricing.

Starting at: Call For Price

Hitachi Four Hole Strip Apertures - Platinum

4 Hole Platinum / Iridium (95:5) Strips 45mm long X 4mm wide X 0.1mm thick for Hitachi H600, H59, S520, H11 microscopes and more.

We also offer similar strips in Molybdenum. Please click HERE for molybdenum apertures.

We can manufacture any hole size in any combination you require. Please e-mail your specifications if you don't find what you need below.

Starting at: $610.00

53170 - SEM Test Standard

A total of 125,000 deep-etched squares of 10 x 10 µm show crisp contrast.

$1,925.00

53156 - Platinum / Iridium Coated Holey Carbon Film

Metal particles provide for resolution checks while holes correct astigmatism and make focusing easier. Mounted on a 3.0 mm diameter grid.

$35.95

Zeiss Type Self Cleaning Electron Microscope Apertures

Zeiss Type Self Cleaning Electromagnetic Aperture Gold Foil 3.04 mm x 0.12 mm

Starting at: Call For Price

Siemens Type Self Cleaning Electron Microscope Apertures

Gold Foil 2 mm x 0.5 mm Siemens Type

Starting at: Call For Price

AEI, Amray, Cambridge, JEOL, FEI / Philips 3.04mm x 0.25mm Disc Apertures

Disc size - 3.04 mm x 0.25 mm

(Fits the FEI Titan. Also fits Tescan Scopes)

Need a hole size not listed here? We do apertures in house and can produce any hole size you need. Just contact us!

Click HERE for Self-Cleaning Apertures of this type

Starting at: Call For Price

Nanolab, Zeiss Electron Microscope Disc Apertures

Disc size - 3.04 mm x 0.12 mm Since we make our apertures in house we offer any size hole you requre even if you don't see it listed here. Please contact us and we can quote you.

Click here for self cleaning apertures of this type

Starting at: Call For Price

Cambridge, Cameca, JEOL, Siemens Electron Microscope Disc Apertures

Disc size - 2 mm x 0.53 mm Don't see the hole size you need here? We make our apertures in house so we can provide any hole size you require, even 32.5 microns if you need it. Just contact us and tell us your needs.

Starting at: Call For Price

Cameca 1000 µm Wehnelt Cylinder Aperture

Wehnelt Cylinder Aperture. Made of molybdenum or platinum. 0.470" x 0.010" thick 1000 µm aperture diameter Other sizes and materials available on request.

Starting at: $94.00

Cameca 800 µm 45° Mirror Aperture

45° Mirror aperture. Made of molybdenum or platinum. 0.236" x 0.004" thick 800 µm Aperture Diameter Other sizes and materials available on request.

Starting at: $101.00

Cameca Electron Microscope Beam Regulation Disc Aperture

Aperture for beam regulation. Made of molybdenum or platinum. 0.470" x 0.004" thick Other sizes and materials available on request.

Starting at: $94.00

Siemens, Cambridge Electron Microscope Disc Apertures

Disc size - 2 mm x 0.50 mm Other holes sizes available

Click Here for self cleaning apertures of this type

Starting at: Call For Price

Self-Cleaning Apertures - Philips Type - Gold Foil - 3mm x 0.25mm

Starting at: Call For Price

Camscan, ISI, Topcon Electron Microscope Disc Aperture

Camscan, ISI, Topcon Disc Apertures Disc size - 4 mm x 0.165 mm Other hole sizes available. Please contact us with your request

Starting at: Call For Price

JEOL Electron Microscope Disc Apertures

Disc size - 6 mm x 0.24 mm Need a hole size not shown above? We manufacture any hole size you need, just call or e-mail your requirements and we can quote you.

Starting at: Call For Price

64025 - Image Quality Checker

A specimen of 200 mesh gold screening is firmly affixed to an SEM specimen mount. This provides a quick method of determining image quality. Good surface detail discernible at reasonably high magnification. Will not oxidize.

Please state specimen mount required.

$40.95

64010 - Grating - "Waffle"

Replica specifically made for SEM use is taken from a ruled diffraction grating with two sets of lines ruled at right angles to each other. There are 54,864 lines per inch in both directions. A 50 mesh screen is placed over entire grating for strength. Useful for magnification determination, detection and measurement of lens distortion, and the determination of the degree of fore-shortening in an image, as a function of specimen tilt. Measurement chart and instructions included.

Please specify the type of specimen mount required.

$69.95

64007 - Grating - 28,800 lines per inch

Replica taken from a ruled diffraction grating. Useful for magnification of 3000x to 30,000x. A 50 mesh screen is placed over entire grating for strength. Measurement chart and instructions included.

Please specify the type of specimen mount required.

$68.95

64005 - Grating - 15,240 lines per inch

Made specifically for use in SEM's. This replica is taken from a ruled diffraction grating with 15,240 lines per inch. Very useful for magnification determination in the range of 1000x to 15,000x. A 50 mesh screen is placed over entire grating for strength. Measurement chart and instructions included.

Please specify the type of specimen mount required.

$68.95

Oval JEOL Four Hole Strip Apertures - Platinum

4 Hole Oval Platinum (Platinum:Iridium 95:5) Strips 10.0mm long X 5.0mm wide X 0.10mm thick.

We also offer similar strips in Molybdenum. Please click HERE for molybdenum apertures.

We can manufacture any hole size in any combination you require. Please e-mail your specifications if you don't find what you need below.

Starting at: $665.00

64015 - Composite Magnification Test Specimen

Composed of three magnification specimens attached firmly to a scanning microscope specimen mount. One specimen is 400 mesh copper screening for low magnification work. The middle specimen is a 15,240 line per inch grating for the high magnification range. The third specimen is a 1,500 mesh nickel screening for the middle magnification range. 50 mesh screening is placed over entire grating for strength. This composite specimen is both a time and space saver. Measurement charts and instructions for use included.

Please specify the type of specimen mount required.

$139.95

64000 - Low Magnification Calibration Specimen

Precision 400 mesh copper screening and 1000 mesh nickel screening is affixed to a specimen mount to aid in calibrating specimens at magnifications from 50x to 1000x.

Please specify the type of specimen mount required.

$43.95

53130 - SEM Performance Standard

A certified test and performance sample for the SEM. Vapor deposited aluminum on a silicon substrate. Photo lithographed and etched. Ten separate measurements and tests may be performed with this one standard. Dimensions are printed near each target area. May be used for magnification calibration, magnification center and scan rotation center, geometry errors and pin cushion distortion, depth of field measurements, dynamic focus performance and tilt correction, orthogonality and linearity tests, stage motion tests and video performance and video loop stability. Instructions included. NBS Certified.

Please specify type of specimen mount required.

$1,795.00