Vacuum Equipment Including Sputtering Targets & Desiccator Cabinets
Ladd Research sells a wide variety of vacuum equipment. Products include sputtering targets, vacuum evaporators & desiccators, glisseal vacuum grease, desiccator cabinets & sputter coaters.
L6602 - Vertical Cabinet Shelf for DryKeeper
L3605 - Vertical Cabinet Rail for DryKeeper
Vacuum Pump
This direct drive vacuum pump is recommended for use with our Large Desiccator (sku: 80040). Ultimate total pressure of 2 x 10-3 mbar. Free air displacement is 114 liters per minute at 60 Hz. 1/2" I.D. heavy walled tubing required.
115 VAC and 60 Hz - Free air displacement at 60 Hz is 114 liters per minute.
220 VAC and 50 Hz - Free air displacement at 50 Hz is 95 liters per minute.
Starting at: Call For Price
30022 - Torr Seal
Excellent sealant for leaks in vacuum equipment requiring vacuum down to 10-9 torr or lower. Forms a high strength bond with metals, ceramics or glass. No solvent involved to evaporate. Torr Seal is a two component system easily mixed. At room temperature it hardens in 1 hour, cures in 24 hours. At 60oC it hardens in 30 minutes, cures in 90 minutes. Forms a reliable seal for long term use. Package of two tubes, total weight is 135 g.
VP300 - Vacuum Patch
TorrLube
TorrLube is a lubricant specifically formulated to work under extreme pressure and temperatures in high vacuum applications. When applied sparingly to O-rings and feed-throughs, TorrLube's excellent lubricating qualities dramatically extend the integrity of vacuum to atmosphere seals, thereby improving vacuum system performance over longer time periods.
Starting at: $224.95
SC500PT - Polaron SC500 - Platinum Disc Target
Platinum Disc Target - 58 mm diameter For the SC500 series
SC6.6 - Hummer SC6.6 Sputter Coater
Carbon Rod Points for the Anatech / Hummer Carbon Evaporation Accessory
Starting at: $105.00
Lab Companion Clear Round Vacuum Desiccators
Starting at: $327.95
Lab Companion Amber Round Vacuum Desiccators
Starting at: $411.95
Lab Companion Clear Cabinet Vacuum Desiccators
Starting at: $56.95
Lab Companion Amber Cabinet Vacuum Desiccators
Starting at: $56.95
Extra Large "Grande" Desiccators
Starting at: $212.95
60mm ( 2 3/8" ) Sputter Targets
Starting at: Call For Price
57mm ( 2 1/4" ) Sputter Targets
Starting at: Call For Price
54mm ( 2 1/8" ) Sputter Targets
Starting at: Call For Price
50mm ( 2" ) Sputter Targets
Starting at: Call For Price
38mm ( 1 1/2" ) Sputter Targets
Starting at: Call For Price
19mm ( 3/4" ) Sputter Targets
Starting at: Call For Price
Disc Sputter Targets for the Hummer I, II, III & Jr Sputter Coaters
Starting at: Call For Price
Annular Sputter Targets for the Hummer XP and 6.6
4 inch annular sputter coater targets for the Hummer XP and the Hummer 6.6.
OD: 4" ID: 3"
Starting at: Call For Price
Annular Sputter Targets for the Hummer V, 6.2, 8, 10 and 10.6
3 inch annular sputter targets for the Hummer V, 6.2, 8, 10 and 10.6
OD: 3"
ID: 2"
The Target Extractor facilitates removal of these targets.
Starting at: Call For Price
Annular Sputter Targets for Polaron Sputter Coaters
Starting at: Call For Price
Glisseal - For High Vacuum and General Laboratory Applications
Starting at: Call For Price
Graphite / Carbon Rod Points for Denton Systems
Starting at: $84.95
53110 - Single Strand Tungsten V-Filament
Hummer 8 Sputter Coater
For manually-controlled plating and processing. Ideal for low to moderate volume sputtering applications. Integral timer terminates processes at preset durations from 0 to 15 minutes so that operator can work on other tasks. Optional quartz crystal-based digital thickness monitor for accurate readings of sample coating thickness. Please Note!! The Hummer 8 does not have an etch mode.
- Options:
- Wide selection of targets made from precious metals.
- Carbon evaporation accessory for producing conductive coatings on samples for x-ray studies.
- End point by quartz thickness monitor .
- Targets must be ordered separately.
Starting at: $105.00
Turbo Sputter Coater
This unit includes the following:
- Hummer 8 system
- Turbomolecular pump
- Quartz chamber 2 rpm rotating stage (8 inch diameter)
- Roughing vacuum pump with mist filter
- Sample stage - for up to 200 mm substrates
Turbo Sputter Coater, DC sputter head, Chromium - This unit is identical to TSC8 except that it also contains a DC sputter head and a DC power supply expressly for chromium sputtering. Please Note!! Requires water cooling.
Turbo Sputter Coater, RF and DC Power Supplies - This unit has a combination of RF and DC power supplies. Contains a single sputter source. Second sputter source can be added for an additional charge.
Starting at: Call For Price
Q-Pod Film Thickness Transducer
A new economical Quartz Crystal Monitor (QCM) for measuring thin film deposition rate and thickness. This film thickness transducer is the simplest and least expensive QCM available anywhere. It connects directly to a USB port on your PC. Windows® - based software included for operation and data logging. It weighs less than 2 ounces and is small enough to fit in a shirt pocket.
The Film Thickness Transducer Includes:
- Windows based software for setup & operation
- QCM sensor Simulator/Tester
- 6" BNC Cable (connects unit to feedthrough)
- 10' USB Cable (connects unit to your PC)
Important Note:
The Q-Pod Film Thickness Transducer includes everything you need outside the chamber. For a complete measurement system, you also need to order a sensor, feedthrough, in-vacuum cable, and crystals.
Starting at: Call For Price
- Category
-
- Secador Techni-Dome Vacuum Desiccator (1)
- The Ladd Vacuum Evaporator (4)
- Digital High Vacuum System Accessories (66)
- Secador Desiccator Cabinets (15)
- Ladd Vacuum Desiccators (8)
- Space Saving Vacuum Desiccators (4)
- Dry-Keeper Desiccator Cabinets (9)
- Miscellaneous Vacuum Accessories (13)
- Glisseal Vacuum Grease (1)
- Sputter Coaters and Accessories (27)
- Lab Companion Vacuum Desiccators (4)
- Extra Large "Grande" Desiccators (1)
- Mechanical and Diffusion Pump Fluids ( Oils ) (7)
