Lubricants, Conductive Coatings & Paints - Electrodag, Molydag & More

Ladd Research stocks many kinds of lubricants, conductive coatings, and paints for laboratory applications including solvents, electrodag & molydag.

21 Item(s)

per page

Grid List

Set Descending Direction
Minimum purchase of 3 quart cans

Electrodag 1415M

A silver-based shielding coating which provides electromagnetic compatibility (EMC) and has been specifically designed to give increased coverage while maintaining a very high conductivity. It is a very economic means of achieving excellent shielding against radiated electromagnetic interference (EMI). It maintains its low resistance even after exposure to heat, cold, humidity and salt spray. It is an air drying system that requires no primer or top coat. It is easily applied by spray or brush and is compatible with plastics commonly used for electronic equipment enclosures. Each can contains 1500 grams (approximately 1 quart).

Minimum order - 3 cans

 

Electrodag 1415M is designed to replace all discontinued shielding coatings that had contained silver-plated copper.

Starting at: Call For Price

Super Shield 843AR Liquid

Super Shield 843AR Silver Coated Copper Conductive Coating

Super Shield 843AR Silver Coated Copper Conductive Coating is a one-part durable acrylic lacquer pigmented with a highly conductive silver coated copper flake, packaged in both aerosol and liquid formats. It uses a solvent based system with no heat cure necessary. The cured coating is smooth, hard and abrasion resistant. It provides good adhesion to plastics, excellent conductivity and high frequency shielding.

Starting at: Call For Price

Super Shield 841AR Nickel Conductive Coating - 150ml Liquid

Super Shield 841AR Nickel Conductive Coating

Super Shield 841AR Nickel Conductive Coating is a one-part durable acrylic lacquer pigmented with a highly conductive nickel flake, and is packaged in aerosol and liquid formats. It utilizes a solvent based system with no heat cure necessary. The cured coating is smooth, hard and abrasion resistant. It provides strong adhesion to plastics, excellent conductivity and strong corrosion resistance, even in marine environments.

Starting at: Call For Price

Total Ground 838AR Liquid - 850ml

Total Ground 838AR Carbon Conductive Coating

838 AR Total Ground Carbon Conductive Coating is a one-part durable acrylic lacquer pigmented with a highly conductive carbon powder, packaged in aerosol and liquid formats. It utilizes a solvent based system with no heat cure necessary. The cured Coating is smooth, hard and abrasion resistant. It provides strong adhesion to plastics, good conductivity, excellent low frequency shielding and strong corrosion resistance, even in marine environments.

Starting at: Call For Price

Super Shield 841ER Nickel Conductive Epoxy Coating

Super Shield 841ER Nickel Conductive Epoxy Coating

Super Shield 841ER Nickel Conductive Epoxy Coating is a two-part system pigmented with highly conductive nickel flake. The cured coating is smooth and extremely hard. It is abrasion, scratch and mar resistant. It also provides good chemical resistance and adheres strongly to plastics, including chemically resistant and low energy plastics.

Starting at: Call For Price

Super Shield 843ER Silver-Coated Copper Epoxy Coating

Super Shield 843ER Silver Coated Copper Conductive Epoxy Coating

Super Shield 843ER Silver Coated Copper Conductive Epoxy Coating is a two-part system pigmented with highly conductive silver coated copper flake. It cures in 24 hours at room temperature or two hours at 80 °C. The cured coating is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It also provides good chemical resistance and adheres strongly to plastics, including chemically resistant plastics.

Starting at: Call For Price

Super Shield 841WB Water Based Conductive Nickel Coating

Super Shield 841WB Water Based Nickel Conductive Coating

Super Shield 841WB Water Based Nickel Conductive Coating is a one-part urethane system pigmented with highly conductive nickel flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. The cured coating is smooth, durable and adheres well to plastics, wood, metal and ceramics. It also bonds well to drywall and can be painted over with common architectural paints.

Starting at: Call For Price

Super Shield 842WB-850

Super Shield 842WB Water Based Conductive Silver Coating

Super Shield 842WB Water Based Silver Conductive Coating is a one-part urethane system pigmented with highly conductive silver flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. The cured coating is smooth, durable and adheres well to plastics, wood, metal and ceramics. It also bonds well to drywall and can be painted over with common architectural paints.

Starting at: Call For Price

843WB-900ml

Super Shield 843WB Water Based Silver Coated Copper Conductive Urethane Coating

Super Shield 843WB Water Based Conductive Silver Coated Copper Coating is a one-part urethane system pigmented with highly conductive silver coated copper flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. The cured coating is smooth, durable and adheres well to plastics, wood, metal and ceramics. It also bonds well to drywall and can be painted over with common architectural paints.

Starting at: Call For Price

Super Shield 842AR liquid

Super Shield 842AR Silver Conductive Coating

Super Shield 842AR Silver Conductive Coating is a one-part durable acrylic lacquer pigmented with an extremely conductive silver flake. It is packaged in both aerosol and liquid formats. It uses a solvent based system with no heat cure necessary. The cured coating is smooth, hard and abrasion resistant. It provides good adhesion to plastics, extreme conductivity, very high frequency shielding and extreme corrosion resistance, even in harsh marine environments.

Starting at: Call For Price

Silver Conductive Grease

Conductive Paste and Grease

Conductive greases and paste to improve electrical and thermal connections between sliding or non-moving surfaces.

See below for a more detailed description of each product.  

Starting at: $15.95

60783 - Bonderite L-GP GP460 Aero - A general purpose lubricant - 453g

60783 - Bonderite L-GP GP460 Aero - A general purpose lubricant - 453g

Bonderite L-GP GP460 Aero is an anti-seize lubricant containing high purity graphite in petrolatum. This material is designed to provide long-lasting service over a wide temperature range. It withstands extreme pressure, carries high loads, and reduces friction, galling, and seizing. Bonderite L-GP GP460 Aero meets the requirements of General Electric specification A50TF201.

Known as Acheson GP 460

$89.95
Bonderite S-FN 213 Acheson (known as DAG 213)

Bonderite S-FN 213 Acheson (known as DAG 213)

One of a series of resin bonded graphite coatings designed to provide dry film lubrication on many substrates.

New Name: Bonderite S-FN 213 Acheson

Starting at: Call For Price

Quart and Gallon Pails also available in 50lb pail

Bonderite S-FN M 254N Acheson (known as Molydag 254N)

One of a series of resin-bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. Molydag 254N is a synergistic conbination of MoS2 and other lubricants dispersed in an epoxy resin solution. It can be applied by standard brush, dip-spin or spray techniques. Molydag 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. Molydag 254N provides an effective performance, even as a very thin film (0.0003" or 8 microns), thus there is little interference with operating tolerances.

New Name: Bonderite S-FN M 254N Acheson

Starting at: Call For Price

Pint, quart and gallon cans

Bonderite S-FN EB 012 Acheson (known as DAG EB-012)

DAG EB-012 (also known as Electrodag EB-012) is one in a series of graphite-based conductive coatings designed to provide controlled electrical properties. It is designed to provide a conductive, chemical-resistant coating on most metals. It is an aqueous-based, conductive, chemical-resistant coating for lithium batteries.

New Name: Bonderite S-FN EB 012 Acheson

Starting at: $59.95

Solvents are sold in one gallon containers

Solvents

Solvent SB-2 (Bonderite S-FN SB-2 Acheson)- Solvent for DAG 213
Solvent SB-8 - Medium drying. Use on general purpose plastics
Solvent SB-10 (Bonderite S-FN SB-10 Acheson) - Slower Drying. Use on solvent sensitive plastics.

Starting at: Call For Price

Loctite EDAG 440AS  (known as Electrodag 440AS)

Loctite EDAG 440AS (known as Electrodag 440AS)

A conductive nickel coating for EMI shielding.

Starting at: $1,022.95

Super Shield 841 Nickel Conductive Coating Aerosol

Super Shield 841 Nickel Conductive Coating

A general purpose EMI and RFI shielding coating.

PLEASE NOTE!! This coating is being replaced by the new and improved AR series of acrylic conductive coatings! We have only a limited supply of the aerosol listed below. For all other forms and quantities see 841AR. 

Starting at: Call For Price

Thinner 435

Thinner 435

Starting at: $22.95

Thinner 4351-1L

Thinner 4351

Starting at: $22.95

Bonderite L-FG ADAG C

Bonderite L-FG ADAG C Graphite Dispersion

Bonderite L-FG ADAG C is an aqueous-based colloidal dispersion. It contains ultra-fine graphite particles along with a unique stabilizer and binder system. These properties produce excellent lubricity and release, faster wetting and higher dilution ratios. It remains stable at service temperatures of 600o F and intermittent temperatures as high as 2200o F.

Starting at: $302.95

21 Item(s)

per page

Grid List

Set Descending Direction

Electron Microscopy Supplies