My Account

Welcome to our new website!

Standards and Specimen Preparation Supplies

Standards & Specimen Preparation Supplies, TEM & SEM Calibration

For TEM & SEM Tests & Calibration. Products include Embedding Capsules, Dri-Block oven, Collodion Solutions, Formvar Powders & Solutions, Release Agents/Dry Lubricants, Replicating Material, Mica Sheets, Grinders, Polishers, & Wire Saws, Zerostat Anti-static Instrument, Microanalytical Tools, Microtomy Supplies, Silicone Rubber Embedding Molds, & Magnification Reference Standards.

Items 1 to 30 of 154 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction
23200 - Premium Red Sable Brushes - Size #00

23200 - Premium Red Sable Brushes - Size #00

For cleaning surface of liquid in microtome boat. First quality sable, very resilient. Also used to fasten samples on SEM studs using conducting paint. Size #00. Sold 3 per package.
$21.95
Glass Scorer

23135 - Glass Scorer/Cutter

Wheel type, for making glass knives.
$13.95
Glass Pliers

23140 - Glass Pliers

Unique pliers, 203 mm long, with fine adjusting screw, produce clean, smooth edges on glass up to 9.5 mm thick with a mere squeeze of the handles.
$52.95
L03077 - Polisher Accessory - Wedge Polishing Clamp

L03077 - Polisher Accessory - Wedge Polishing Clamp

Used with L03090 or L03067 and clamps the small pyrex rods into the L590. The clamp is anodized aluminum and squeezes against the pyrex rod, holding it in place. Included at no charge with the purchase of the BiPod Polisher.
$60.00
L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

Similar in function to the Pyrex insert. Specimens are mounted to the rod for wedge polishing applications. Included at no charge with the purchase of the BiPod Polisher.
$27.00
L03065 - Polisher Accessory - Pyrex Insert - Large

L03065 - Polisher Accessory - Pyrex Insert - Large

This insert is a glass stub used for TEM polishing of specimens. It is used in conjunction with the slotted L bracket and is used for wedge polishing applications. Not included with the purchase of the BiPod Polisher.
$23.00
L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

The SEM stub mount is designed specifically for mounting specimens for SEM polishing. It fits directly into the stage of most standard SEM stages and eliminates the need for remounting the specimen prior to SEM observation. Included at no charge with the purchase of the BiPod Polisher.
$67.50
21680 - Ladd Capsule Holder and Finger Protector

21680 - Ladd Capsule Holder and Finger Protector

A molded silicone rubber grip to hold embedding capsules steady and protect fingers while slitting capsules to remove resin block. Package of 5.
$16.95
Beem Capsules

Beem Capsules

These pre-shaped polyethylene capsules were developed to replace the conventional round-bottomed gelatin capsules with all their attendant problems.

Important advantages are:

1. They produce preformed blocks.

2. Orientation of specimen is facilitated.

3. The plastic does not adhere to the polymerized block, which is readily removed.

4. There is no need to pre-dry these capsules to eliminate moisture, as was too often necessary with gelatin capsules.

 

Size 00 - 8 mm diameter x 20 mm high

Size 3 - 5.6 mm diameter x 14 mm high

Starting at: $10.95

Conical Tip Embedding Capsule

Conical Tip Embedding Capsules

Used seccessfully for embedding very small or thin, elongated pieces of tissue. The shape of these capsules requires that care be exercised when filling them so there will be no air entrapped in the tips. Suitable for centrifugal packing of whole cells. Makes a block that is 7.9 mm OD x 18 mm high.

Starting at: $13.95

Cylindrical Tip Embedding Capsule

Cylindrical Tip Embedding Capsules

These capsules have proved of great use to the virologist for encapsulation of virus samples. They have also proved helpful to those microscopists who must examine cross-sections of thin elongated sections of tissue. Care must be exercised when filling these capsules to prevent entrapment of air in the tips. Suitable for centrifugal packing of whole cells. Makes a block that is 8 mm ID x 18 mm high.

Starting at: $13.95

Beem Capsule Press

Beem Capsule Press

For removing 00 standard, bottle neck and conical tip capsules Comes with an adapter for #3 capsules and a wrench to install adapter.

Starting at: $8.00

Embedding Capsule Holder for Size 00 Beem Capsules

Embedding Capsule Holders

Hold embedding capsules upright to produce either pyramidal or flat tip blocks. The twenty-two numbered, nonconstricting cavities in each break-resistant holder can be illuminated from below for accurate specimen orientation. Holders can be stacked in the polymerization oven or on the storage shelf - a real space saver.

Starting at: $15.95

Beem Individual Block Holder

Beem Individual Block Holder

Stores 10 blocks, size 00 (cut or uncut) in indexed compartments. Tight plastic lid keeps blocks in place.

Dimensions (outside): 2½ x 1¾ x ½ "

Starting at: $59.95

UV Compatible Capsule Holders

UV Compatible Capsule Holders

BEEM now has available a capsule holder in a UV transparent plastic, hence it is now possible to carry out low temperature polymerizations using these UV transparent capsule holders.

Starting at: $19.95

Gelatin Capsules

Gelatin Capsules

An alternative to embedding with Beem Capsules. Can also be used for storing specimens.

Other sizes available upon request.

Starting at: $33.95

Micromold

Micromolds

These unitized polyethylene molds have been used quite successfully for holding embedding medium plus specimen material during polymerization prior to ultramicrotomy. Each mold unit makes 10 numbered blocks, 8 mm in diameter, the equivalent of #00 embedding capsules. These blocks have a pyramid-shaped tip 1 mm square, which requires little or no trimming.

Starting at: $11.95

Ladd Easy Molds - Size 00

Ladd Easy Molds - Size 00

Available in two sizes: 5.6 and 8mm diameter. The 5.6mm diameter molds corresponds to BEEM capsule size 3 and the 8mm diameter molds corresponds to BEEM capsule size 00. These polyethylene molds make embedding easy and the see-through tips facilitate rapid specimen orientation. Polymerized blocks can be removed by thumb pressure. Easy Molds come as a free-standing stack of 20 embedding compartments which allows free circulation of air and gives even polymerization. For anaerobic embedding resins, the molds are self-stacking, allowing sealing from air. The used molds are convenient for storage of blocks after sectioning. Mold size is 87 x 66mm.

Starting at: $39.95

Ladd Easy Molds - Size 3

Ladd Easy Molds - Size 3

Available in two sizes: 5.6 and 8mm diameter. The 5.6mm diameter molds corresponds to BEEM capsule size 3 and the 8mm diameter molds corresponds to BEEM capsule size 00. These polyethylene molds make embedding easy and the see-through tips facilitate rapid specimen orientation. Polymerized blocks can be removed by thumb pressure. Easy Molds come as a free-standing stack of 20 embedding compartments which allows free circulation of air and gives even polymerization. For anaerobic embedding resins, the molds are self-stacking, allowing sealing from air. The used molds are convenient for storage of blocks after sectioning. Mold size is 87 x 66mm.

Starting at: $39.95

22300 - Dri-Block Oven

22300 - Dri-Block Oven

This oven uniformly cures embedding blocks. The thermistor temperature sensor and solid state circuitry gives exceptional temperature control. A recessed chamber at the top of the unit holds three interchangeable aluminum block inserts, two types of which are available.

Extremely compact. Only 15" wide x 9" deep x 4" high.

$1,045.00
/

22302 - Aluminum Insert for Dri-Block Oven to Contain Flat Embedding Molds

For Dri-Block Oven. Has 61mm x 75mm x 11mm deep recess to accept our Flat Embedding Molds.
$345.00
Aluminum Insert for Size 00 Beem Capsules

22301 - Aluminum Insert for Dri-Block Oven to contain Size 00 Beem Capsules

For Dri-Block Oven. Has 18 numbered openings to accept 00 BEEM capsules.
$345.00
BEEM Dial-a-Grid and Block Holder Module

21665 - BEEM Dial-a-Grid and Block Holder Module

Stores 24 specimen grids and 2 blocks. Package of 10.
$46.95
BEEM Block Holder Module

21670 - BEEM Block Holder Module - Package of 10

For storing 10 specimen blocks. Package of 10.
$49.95
Formvar 15/95 Powder

10835 - Formvar 15/95 Resin Powder (Polyvinyl Formal)

For use in the preparation of Formvar solutions. 100 g bottle.
$17.95
Teflon Spray

PTFE Spray

Uses PTFE of smaller particle size. Contains no ozone-depleting chemicals. Can be used to mold plastics, rubbers, resins, acrylics, epoxies, urethanes, nylong, phenolics, polycarbonates, polystyrene and elastomers.

Use for molds up to 100oC. 16oz aerosol

Some of the many uses for include: Gears and Belts; Wire and Cable; Thread, Cord and Rope; Chain Drives; Metalworking (extrusion, rolling, drawing and sizing).

Please Note: This product is not recommended or approved for use with foodstuffs.

Starting at: $24.95

Dow Corning 316 Silicone Release Spray

Dow Corning 316 Silicone Release Spray

This product is a heat-stable, silicone anti-stick agent. It is effective in solving a wide range of sticking or adhesion problems. The silicone film formed by this product resists breakdown due to oxidation which can leave carbonaceous residues or gummy surfaces. Once dried, it has low volatility at temperatures up to 200oC.

Dow Corning 316 Release Spray is listed for contact with food (FDA conformance to 21 CFR 175.300).

Packaged in 10oz. aerosol cans.

Starting at: $21.95

Replicating Kit 12000

Replicating Kits

Replicating Kit, 2 x 25 ml replicating solution, brush applicator.

Starting at: $42.95

Replicating Tape 100 ft roll 12010-100

Replicating Tape, 0.75" x 5 mil

Replicating Tape, 15' x 0.75" x 5 mil Available in 100, 200 and 300 ft rolls.

Starting at: $33.95

Replicating Solution w/brush cap

Replicating Solutions - 25 ml

Replicating Solutions, 25 ml. Available in packages of 2 and 5 bottles.

Starting at: $20.95

Items 1 to 30 of 154 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies