Scanning Electron Microscopy Graphite & Silver Conductive Paints

Ladd Research Provides a wide variety of scanning electron microscopy conductive paints including silver and graphite varieties.

We cannot guarantee a specific "shelf life remaining". We do guarantee that all paints will have a minimum of 90 days shelf life remaining. 

10 Item(s)

per page

Grid List

Set Descending Direction
60781 - Graphite Paint Thinner - 30 ml

60781 - Graphite Paint Thinner - 30 ml

Graphite Paint Thinner for Electrodag 502.
DAG 503 62% 15g bottles with brush cap

DAG 503 62%

DAG 503 62% silver coating is a general purpose, flexible, high temperature,
conductive material designed for a wide variety of uses. As supplied, it is suitable for direct
application to most substrates, including plastics and elastomers, because of its air-dry

New name: LOCTITE EDAG 503 62% E&C

Butyl acetate diluent.

Starting at: $73.95

conducting silver paint with brush cap

Conducting Silver Paint

Conducting Silver Paint is a suspension of specially prepared silver powder combined with an organic binder. It is an air-dry formulation and is especially useful in producing electrically conductive paths on paper, plastic, rubber, cloth, wood, etc., and may be applied by dipping or spraying. 

This highly conductive paint exhibits versatility and is useful over a broad range of applications.

  • Electroforming
  • Electroplating (as a base)
  • Tantalum capacitors
  • Static shielding
  • Magnetic tapes 

Starting at: $17.95

60803 - Conductive Silver Pen

60803 - Conductive Silver Pen

This pen is great for adhering samples to SEM stubs. Designed for making instant conductive silver traces, the specially formulated silver-bearing thermoplastic polymer dries in minutes at room temperature. Valved pen tip allows smooth flow with normal writing pressure and is spring loaded to prevent clogging. Pen tip is approximately 1/16" in diameter. If you wish to use the pen for traces, solderable terminations are possible using a 250o F cure for 10-15 minutes. Tin, lead, or silver solder can be used (do not exceed 350 o F for more than 5 seconds.) Each pen is filled with approximately 100 feet worth of traces. Approximately 39-45% silver with less than 10 microns in diameter. Thinner is butyl acetate.


Product Weight: 8.5 g.

Conductive Silver Epoxy Kit - 60802

Conductive Silver Epoxy Kit

Use this two part electrically conductive silver epoxy for adhering microscope samples and solderless connections. Also good for bonding in electric design, prototype and repair projects. Applications include circuit board repair, surface mount connections, static discharge, shielding and grounding. Ideal for bonding of heat sensitive components. Curing time as little as ten minutes when 150-250o F is applied. Resistivity is 0.001 ohm-cm. 14 gram kit (7g each resin and hardener).

Starting at: $114.95

Bonderite L-GP 154 Acheson (known as DAG 154)

Bonderite L-GP 154 Acheson (known as DAG 154)

Dag 154 provides clean,long-wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush or dip techniques.

New Name: Bonderite L-GP 154 Acheson

Isopropanol solvent.

Starting at: $79.95

Loctite EDAG 154 E&C (known as Electrodag 154 & Colloidal Graphite Paint)

Loctite EDAG 154 E&C (known as Electrodag 154 & Colloidal Graphite Paint)

Electrodag 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many nonconductive substrates, including most plastics.

New Name: Loctite EDAG 154 E&C

Isopropanol solvent.

Starting at: $32.95

Aerodag G

Bonderite L-GP G Acheson (known as Aerodag G)

Graphite lubricating resistance coating. Aerodag® G offers excellent adhesion to most plastics. This feature, combined with high lubricity and electrical properties, makes this product especially valuable in the design of lightweight electrical/electronic parts.

NEW NAME: Bonderite L-GP G Acheson

10.5 oz. aerosol

Starting at: $31.95

DAG T-502

Bonderite S-FN T-502 Acheson (known as DAG T-502 & Conducting Graphite Paint)

DAG T-502 is a combination of specially processed carbon particles in a fluoroelastomer resin system designed to provide high resistance values. Solvent is methyl ethyl ketone. Also known as Conducting Graphite Paint. Formerly known as Electrodag 502.

New Name: Bonderite S-FN T-502 Acheson

Starting at: $11.95

60811 - Electrodag 478 SS (Silver Paste)

60811 - Electrodag 478 SS (Silver Paste)

Loctite Edag 478SS E&C (known as Electrodag 478SS)
Conductive, silver-based polymer used for thick film coatings.


15 g bottle


10 Item(s)

per page

Grid List

Set Descending Direction

Electron Microscopy Supplies