Lubricants, Conductive Coatings & Paints - Electrodag, Molydag & More

A silver-based shielding coating which provides electromagnetic compatibility (EMC) and has been specifically designed to give increased coverage while maintaining a very high conductivity. It is a very economic means of achieving excellent shielding against radiated electromagnetic interference (EMI). It maintains its low resistance even after exposure to heat, cold, humidity and salt spray. It is an air drying system that requires no primer or top coat. It is easily applied by spray or brush and is compatible with plastics commonly used for electronic equipment enclosures. Each can contains 1500 grams (approximately 1 quart).

Minimum order - 3 cans

 

Electrodag 1415M is designed to replace all discontinued shielding coatings that had contained silver-plated copper.

Learn More

Super Shield 842AR Silver Conductive Coating is a one-part durable acrylic lacquer pigmented with an extremely conductive silver flake. It is packaged in both aerosol and liquid formats. It uses a solvent based system with no heat cure necessary. The cured coating is smooth, hard and abrasion resistant. It provides good adhesion to plastics, extreme conductivity, very high frequency shielding and extreme corrosion resistance, even in harsh marine environments. Learn More

Super Shield 843AR Silver Coated Copper Conductive Coating is a one-part durable acrylic lacquer pigmented with a highly conductive silver coated copper flake, packaged in both aerosol and liquid formats. It uses a solvent based system with no heat cure necessary. The cured coating is smooth, hard and abrasion resistant. It provides good adhesion to plastics, excellent conductivity and high frequency shielding.

Learn More

Super Shield 841AR Nickel Conductive Coating is a one-part durable acrylic lacquer pigmented with a highly conductive nickel flake, and is packaged in aerosol and liquid formats. It utilizes a solvent based system with no heat cure necessary. The cured coating is smooth, hard and abrasion resistant. It provides strong adhesion to plastics, excellent conductivity and strong corrosion resistance, even in marine environments. Learn More

838 AR Total Ground Carbon Conductive Coating is a one-part durable acrylic lacquer pigmented with a highly conductive carbon powder, packaged in aerosol and liquid formats. It utilizes a solvent based system with no heat cure necessary. The cured Coating is smooth, hard and abrasion resistant. It provides strong adhesion to plastics, good conductivity, excellent low frequency shielding and strong corrosion resistance, even in marine environments. Learn More

Super Shield 841ER Nickel Conductive Epoxy Coating is a two-part system pigmented with highly conductive nickel flake. The cured coating is smooth and extremely hard. It is abrasion, scratch and mar resistant. It also provides good chemical resistance and adheres strongly to plastics, including chemically resistant and low energy plastics. Learn More

Super Shield 843ER Silver Coated Copper Conductive Epoxy Coating is a two-part system pigmented with highly conductive silver coated copper flake. It cures in 24 hours at room temperature or two hours at 80 °C. The cured coating is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It also provides good chemical resistance and adheres strongly to plastics, including chemically resistant plastics. Learn More

Super Shield 841WB Water Based Nickel Conductive Coating is a one-part urethane system pigmented with highly conductive nickel flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. The cured coating is smooth, durable and adheres well to plastics, wood, metal and ceramics. It also bonds well to drywall and can be painted over with common architectural paints. Learn More

Super Shield 842WB Water Based Silver Conductive Coating is a one-part urethane system pigmented with highly conductive silver flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. The cured coating is smooth, durable and adheres well to plastics, wood, metal and ceramics. It also bonds well to drywall and can be painted over with common architectural paints.

Learn More