Scanning Electron Microscopy Graphite & Silver Conductive Paints
Ladd Research Provides a wide variety of scanning electron microscopy conductive paints including silver and graphite varieties.
We cannot guarantee a specific "shelf life remaining". We do guarantee that all paints will have a minimum of 90 days shelf life remaining.
Bonderite S-FN T-502 Acheson (known as DAG T-502 & Conducting Graphite Paint)
Starting at: Call For Price
DAG T-502 is a combination of specially processed carbon particles in a fluoroelastomer resin system designed to provide high resistance values. Solvent is methyl ethyl ketone. Also known as Conducting Graphite Paint. Formerly known as Electrodag 502.
New Name: Bonderite S-FN T-502 Acheson
Learn MoreDAG 503 62%
Starting at: $72.95
DAG 503 62% silver coating is a general purpose, flexible, high temperature,
conductive material designed for a wide variety of uses. As supplied, it is suitable for direct
application to most substrates, including plastics and elastomers, because of its air-dry
characteristics.
New name: LOCTITE EDAG 503 62% E&C
Butyl acetate diluent.
Learn MoreConducting Silver Paint
Starting at: $19.95
Conducting Silver Paint is a suspension of specially prepared silver powder combined with an organic binder. It is an air-dry formulation and is especially useful in producing electrically conductive paths on paper, plastic, rubber, cloth, wood, etc., and may be applied by dipping or spraying.
This highly conductive paint exhibits versatility and is useful over a broad range of applications.
- Electroforming
- Electroplating (as a base)
- Tantalum capacitors
- Static shielding
- Magnetic tapes
60803 - Conductive Silver Pen
This pen is great for adhering samples to SEM stubs. Designed for making instant conductive silver traces, the specially formulated silver-bearing thermoplastic polymer dries in minutes at room temperature. Valved pen tip allows smooth flow with normal writing pressure and is spring loaded to prevent clogging. Pen tip is approximately 1/16" in diameter. If you wish to use the pen for traces, solderable terminations are possible using a 250o F cure for 10-15 minutes. Tin, lead, or silver solder can be used (do not exceed 350 o F for more than 5 seconds.) Each pen is filled with approximately 100 feet worth of traces. Approximately 39-45% silver with less than 10 microns in diameter. Thinner is butyl acetate.
Product Weight: 8.5 g.
Learn MoreConductive Silver Epoxy Kit
Starting at: $114.95
Use this two part electrically conductive silver epoxy for adhering microscope samples and solderless connections. Also good for bonding in electric design, prototype and repair projects. Applications include circuit board repair, surface mount connections, static discharge, shielding and grounding. Ideal for bonding of heat sensitive components. Curing time as little as ten minutes when 150-250o F is applied. Resistivity is 0.001 ohm-cm. 14 gram kit (7g each resin and hardener).
Learn MoreBonderite L-GP 154 Acheson (known as DAG 154)
Starting at: $116.95
Dag 154 provides clean,long-wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush or dip techniques.
New Name: Bonderite L-GP 154 Acheson
Isopropanol solvent.
Learn MoreLoctite EDAG 154 (known as Electrodag 154 & Colloidal Graphite Paint)
Starting at: $39.95
Now in stock!
Electrodag 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many nonconductive substrates, including most plastics.
New Name: Loctite EDAG 154 E&C
Isopropanol solvent.
Learn MoreBonderite L-GP G Acheson (known as Aerodag G)
Starting at: $48.95
Graphite lubricating resistance coating. Aerodag® G offers excellent adhesion to most plastics. This feature, combined with high lubricity and electrical properties, makes this product especially valuable in the design of lightweight electrical/electronic parts.
NEW NAME: Bonderite L-GP G Acheson
10.5 oz. aerosol
Learn More60811 - Electrodag 478 SS (Silver Paste)
Discontinued by Manufacturer
Loctite Edag 478SS E&C (known as Electrodag 478SS)
Conductive, silver-based polymer used for thick film coatings.
15 g bottle
Learn More