Water Purification & Detection, Light Tables, Lab Balances & More

For holding sample securely in BiPod Polisher. Included at no charge with the purchase of the BiPod Polisher. Learn More

Our new mini-centrifuge is the perfect answer for quick spin-downs from tubewalls and caps, HPLC preparations, cell separations and micro-filtration tubes. The tiny footprint and quiet operation makes it perfect for desktop use or quick transport between countertops. A great convenience and a superb value!

Specifications:

• rpm: 6,000
• Relative Centrifugal Force: 2,000g
• Capacity: 6 x 1.5ml
• Operating Temperature: Ambient
• Weight: 494g
• Dimensions: 120mm H x 130mm W x 137mm D
• Electrical: 110V;50/60Hz , 220V:50/60Hz

Small - The mini-centrifuge can easily squeeze onto a crowded countertop.

Safe - Turn centrifuge on and off without opening the lid using an independent switch.

Simple - A pop-open latch system and transparent lid allow you to monitor the sample while it spins. Polished ABS finish quickly wipes clean. Internal mini-transformer eliminates cumbersome adapters.

Quiet - The low-durometer foot grip and fiberglass-reinforced carbonate rotor assure sure-footed, noise-free operation.

Convenient - The 6 tube, fixed-angle rotor requires no unlocking, no releasing, just pop the tubes in and out. Included adapters quickly accommodate 0.5 ml tubes.

Learn More

Demagnetizes or magnetizes parts or tools. To demagnetize: simply hold object in the center of the opening with button depressed for 3 or 4 seconds. Slowly withdraw object in a straight line. Release button. To magnetize: hold the part or tool against the inside of the opening and press the button for 4 or 5 seconds and release. Opening is even large enough to accommodate cassette tapes for quick erasure. Oblong hole is 3" x 1 1/2". Learn More

Handles delicate grids, substrates, thin sections, etc. without breaking or pinching. Performs tweezer functions such as picking up, holding and carrying. Vacuum is created at the tip by placing finger over control port located on the probe handle. To break vacuum, just remove finger from port. Adjustable vacuum generator lets user dial desired vacuum pressure and can create up to 14" Hg vacuum (air flow of 125 in3/min.) Unit is 115 VAC, 60 Hz and 2 watts. Unit comes complete with vacuum generator, anodized aluminum probe, 4 feet of tubing with in-line filter and 5 stainless steel probe tips (0.052", 0.047", 0.022", 0.016" and 0.013" ID). Learn More

For multi-tube mixing. Can also be used for larger vessels with covered tops. Continuous or touch-on operation. Full range speed control: 100 rpm to 3000 rpm to match your contents and vessel requirements. Interchangeable mixing surfaces: single tube rubber cup or 3 1/2" diameter resilient rubber top for beakers, etc. Acid and alkali resistant white plastic cabinet. Heavy cast metal base for greater stability. Soft foam rubber feet protect work surface and prevent "walking". Learn More

This highly durable tool stand is ideal for safely holding up to 14 small tools on the workbench. A non-skid rubber strip keeps the tools' base from slipping and the notched end keeps the tools' work end elevated and free from benchtop contamination. Learn More

Low Profile, Toolmakers Specimen Clamp Made of special hardened steel and designed for utmost performance. Clamps equipped with spring screw clip. Conforms to government specifications. Particularly desirable for holding or clamping small work together when drilling, assembling, etc. Ideal for holding embedding blocks and specimens for trimming and shaping. Clamp has 1 1/4" capacity and a 2" jaw length. Learn More

For low cost cutting of bars, pipe, angle iron, channel tubing, flat stock, rod, etc.

• Easily handles 1" solid round, 2" pipe.
• Adjustable work length stop and down stop furnished.
• 1/2" wheel arbor
• Takes 7"diameter abrasive wheel.
• 1 hp TEFC motor 1 ph (110, 220 volt) Please specify voltage.
• Dimensions - L 22" x W 10" x H 14"
• With cord and switch.
• Wheel not included.
• Spindle RPM - 4800.
• Weight 75 lbs

Learn More

- Compact. Cavity is 13" Long x 13" Deep x 8 1/16" High - Outer dimensions: 20 1/8" Long x 15" Deep x 12" High - Stainless steel cavity and wrapper - Variable power. Levels from 25 to 825 watts - Microwaves turn on instantly. No 2-3 second delay. - Can be operated in manual or automatic mode - Removable thermal probe for easy field replacement - Variety of thermal probes available - Cavity air removed through chemically resistant duct. - Fresh air pulled into cavity via fan - Microwave compatible feedthrough for 1/4" ID tubing Microwaves come with 8 feet of chemical resistant exhaust duct, 2 clamps for the exhaust duct, CAP baseline test for microwave and temperature reproducibility and tips on microwave usage. Learn More