Water Purification & Detection, Light Tables, Lab Balances & More
Ladd Research sells a wide variety of small equipment & instruments including incubators, hot & cold plates, light boxes, ultrasonic cleaners & more.
LF18385 - Economy Vibrasorb® Vibration Damping Platform
Use this economy vibration damping platform to isolate delicate benchtop instruments from vibrations caused by nearby equipment such as pumps, stirrers and blenders. Vibro-Absorber damping mounts at each corner support the 46 pound mass of the platform. The smooth, non-slip neoprene working surface area is 13 1/2" x 11" and easily wipes clean. The shell is made of high impact polystyrene and is filled with a dense aggregate. Weight holding capacity is 24 pounds. Shipping weight - 53lbs.
Call For Price
Liquid Nitrogen Thermos
For temporary storage of up to 1 or 2 quarts of liquid nitrogen. Unbreakable, stainless steel construction complete with threaded Uno-Flow stopper. Stopper allows for venting and pouring of liquid while stopper remains in place. Due to its excellent insulating properties, can be used for hot liquids also.
Starting at: $62.95
L03062 - Tripod Polisher Accessory - Delrin Foot (sold as each, needs 3 per unit)
For use in micrometer assembly.
$31.95
L03075 - Tripod Polisher Accessory - Microscope Stand
Designed to hold the Tripod Polisher upside down to allow for viewing the specimen under a dissecting microscope. The stand can also be used as a storage device in between processing steps.
$65.00
L03096 - Tripod Polisher Accessory - Heater Block
A large square aluminum block which is designed to be used on a hot plate. The block provides a stable platform onto which the L brackets can be placed and heated to the proper temperature for mounting specimens.
$65.00
L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )
The SEM stub mount is designed specifically for mounting specimens for SEM polishing. It fits directly into the stage of most standard SEM stages and eliminates the need for remounting the specimen prior to SEM observation. Included at no charge with the purchase of the BiPod Polisher.
$67.50
73015 - Refrigerated Recirculator
Compact, portable recirculator provides a constant flow of cool, clean water at desired temperature and pressure. The unit is equipped with a low pressure pump ideal for circulating cooling water through evaporators, condensers, distillation columns, etc. Features include: Adjustable temperature control. Designed and constructed for continuous operation. Sealable fluid reservoir eliminates coolant losses in closed systems and allows circulation to open external systems. Economical to operate. Fully hermetic compressor sealed in oil for years of trouble-free service. Versatile 2 gpm low pressure pump. Temperature range -5o to +35o C.
Call For Price
L0307601 - Tripod Polisher Accessory - Pyrex Wedge Polishing Stub
Used with L03077 Wedge Polishing Clamp.
$19.00
11750 - Ladd Refrigerator
Outside dimensions: 17 3/4" high x 19 3/4" wide x 19 1/2" deep. Adjustable shelf. Magnetic door gasket. Adjustable thermostat. Hermetically sealed copressor. UL approved. Small freezer compartment. Operates on 115 VAC.
Call For Price
L03065 - Polisher Accessory - Pyrex Insert - Large
This insert is a glass stub used for TEM polishing of specimens. It is used in conjunction with the slotted L bracket and is used for wedge polishing applications. Not included with the purchase of the BiPod Polisher.
$23.00
LH18386 - Large Vibrasorb® Vibration Damping Mount
Vibrasorb Damping Mounts isolate sensitive analytical balances and other instruments from vibrations caused by nearby equipment such as pumps, stirrers and blenders. Molded of dense black and white terrazzo, this 2 1/2" thick platform is supported on four Vibro-Absorber cushions and neoprene feet and support up to 35 pounds. This unit will absorb vibrations down to 13Hz with a 35 pound load. With lighter loads, the minimum frequency of damping will increase to a value between 16Hz and 25Hz. A polished surface resists scratches and chemical attack. 18" x 22". Shipping weight - 87 lbs.
Call For Price
LH18387 - Small Vibrasorb® Vibration Damping Mount
Small Vibrasorb Vibration Damping Mount is like the Large Vibrasorb Vibration Damping Mount (sku: LH18386), except that this unit will absorb vibrations down to 16Hz with a 35 pound load. Dimensions: 13 3/4" x 13 3/4". Shipping weight - 42 lbs.
Call For Price
L03060 - Optional Tripod Polisher Accessory - Parallel Polishing Mount
A round aluminum disc with a Pyrex rod mounted into the center of the disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens.
$72.00
L03061 - Optional Tripod Polisher Accessory - Planarizing Tool
This tool is a large square piece of aluminum used to planarize the delrin feet of the Tripod Polisher.
$228.00
L03080 - Optional Tripod Polisher Accessory - Parallel Polishing Mount, Stainless Steel
A round stainless steel disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens. 1.25" Diameter
$43.00
L59001 - Optional Tripod Polisher Accessory - Ion Mill Stage
Designed to accept the special SEM stud used with the Tripod Polisher. The SEM stud is mounted in the Ion Mill Stage and sample is briefly ion milled to remove fine scratches, polishing debris and to give surface topography prior to SEM analysis.
$205.00
L03068 - Optional Tripod Polisher Accessory - X-section L-bracket
This bracket utilizes a small clamping mechanism on the face of the bracket to allow samples to be clamped without the need for using mounting waxes.
$157.00
80624 - Viewing Box - 36" x 48" - NLA
Viewing Box - 36" x 48" overall size. Contains five 18 watt bulbs.
Call For Price
Tripod Polisher for SEM & Accessories
The Tripod Polisher, L590SEM, comes complete with sufficient accessories to prepare samples for scanning electron microscopy (SEM).
The following accessories are included at no charge with the purchase of the L590SEM. (prices included if you wish to purchase additional accessories)
Starting at: $6.50
80623 - Viewing Box - 24" x 36" - NLA
Viewing Box - 24" x 36" overall size. Contains five 18 watt bulbs.
Call For Price
Tripod Polisher for TEM & Accessories
The Tripod Polisher, L590TEM, comes complete with sufficient accessories to prepare samples for transmission electron microscopy (TEM).
The following accessories are included at no charge with the purchase of the L590TEM. (prices are included if you wish to purchase additional accessories)
Starting at: $6.50
81025 - High Intensity Magnifying Lamp
5 inch diameter ophthalmic magnifying lens provides a large viewing area with no distortion. Improves visual acuity with its 2X magnification and direct light source. Leaves both hands free for working or handling small tools.
$126.95
81024 - Mini Magnifier
This free-standing magnifier allows enhanced viewing of Petri dishes, multi-well plates, x-ray films, stained gels, slides or text. The precision molded lens offers 1.75 x magnification. The unique stand allows the magnifier to be placed over a variety of objects, including the Mini Light Box (sku: 81016).
$235.95
L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)
Similar in function to the Pyrex insert. Specimens are mounted to the rod for wedge polishing applications. Included at no charge with the purchase of the BiPod Polisher.
$48.95
L03077 - Polisher Accessory - Wedge Polishing Clamp
Used with L03090 or L03067 and clamps the small pyrex rods into the L590. The clamp is anodized aluminum and squeezes against the pyrex rod, holding it in place. Included at no charge with the purchase of the BiPod Polisher.
$60.00
L03067 - Tripod Polisher Accessory - Screw Clamp L Bracket
This bracket has a set screw on each side of the bracket which is designed to hold an SEM mount in place.
$135.00
11275 - Universal Swivel Vacuum Vise
For general use in the laboratory. 2 1/2" long x 1/2" deep jaws. Tilts, turns and rotates with a quick turn of the control know. Vacuum base holds the vise firmly to any surface. Includes standard head and smooth, nylon jaws.
$71.95
Browse By
- Category
-
- Ohaus Laboratory Balances (52)
- Water Purification & Detection (10)
- Vices & Clamps (7)
- Hot, Cold & Stir Plates (8)
- Grinders, Polishers & Wire Saws (42)
- Refrigerators (3)
- Vibration Damping Platforms (3)
- Lighting & Vision Aids (3)
- Porta-Trace Light Boxes and Tables (9)
- Precision 3" Cut-Off Saw (3)
- Laboratory Microwave Ovens (9)
- Incubators (6)
- Miscellaneous Small Equipment (8)
- 7" Abrasive Cut-Off Saw (1)
- Ultrasonic Cleaners & Accessories (8)
- Cavitator Ultrasonic Cleaners (6)
- Spindrive Shaker & Vibrating Platforms (2)
- Electronic Digital Micrometers (1)
