Water Purification & Detection, Light Tables, Lab Balances & More

Separate stirring and heating switches. Stirring and heating may be used simultaneously or independently. Stirring speeds adjustable between 60-1650 rpm. Recommended for stirring squeous liquids with viscosities less than or equal to 100% glycerol. One liter flask capacity. Extended safety front separates controls from hot surfaces. Thermostat controlled temperature adjustable up to 382o C. 6" x 6" solid aluminum top plate assures fast, steady heating. Includes 1/2" and 1 1/2" stir bars. Overall dimensions: 7 1/2" deep x 6" wide x 4 3/4" high. 120 VAC, 60 Hz, 500 watts. Learn More

Same mechanical features as Standard PanaVise Head, except that stem is attached to rear of head to permit positioning work closer to the work bench. Heavy-duty steel jaws may be interchanged with optional accessory nylon jaws. By combining with optional Low-Profile Base, the work piece can be swung out and away from the work bench for clearance. Learn More

Base design allows tilting, turning and rotating of head to any position. Load control knob and split-ball features permit locking, changing position or easy head removal. Three base mounting holes allow for permanent mounting on benchtop or portability when attached to Tray Base Mount, (sku: 11494). Base diameter 5", overall height 3 13/16". Learn More

This traditional distillation unit produces from 300 - 400 ml per hour from a 1000 ml flask. This water has been shown to have a conductivity of 7 x 10^-7 Mhos, and to be essentially free from biological contamination. Hardware, heating mantle and powerstat included.

Learn More

Designed specifically for wedge polishing of TEM specimens. the mount consists of a small aluminum clamping mechanism and 5 Pyrex rods which slide into the center of the clamp and are held in place when the L-bracket is tightened. Not included with the purchase of the BiPod Polisher. Learn More

Designed for quick, easy polymerization of both plastic embedding media and plastic mounting media. Specimen tray designed to hold up to 12, 3" x 1" glass slides. Ultraviolet peak radiation is 320-360 nm, so presents minimal hazard to user. Can be operated at temperatures as low as 0o C for heat sensitive specimens. Unit is compact and lightweight with external dimensions of 5 1/4" high x 5 1/2" deep x 19" wide. Has hinged top for easy access to specimen tray. Operates on 110-120 VAC, 60 Hz at less than 1 amp. Step-down transformer available for 220-240 VAC, 50-60 Hz. Replacement lamps available . Capsule holder included. Learn More

Priced at $21.00 individually. Included at no charge with the purchase of the BiPod Polisher. Learn More

For holding sample securely in BiPod Polisher. Included at no charge with the purchase of the BiPod Polisher. Learn More

Our new mini-centrifuge is the perfect answer for quick spin-downs from tubewalls and caps, HPLC preparations, cell separations and micro-filtration tubes. The tiny footprint and quiet operation makes it perfect for desktop use or quick transport between countertops. A great convenience and a superb value!

Specifications:

• rpm: 6,000
• Relative Centrifugal Force: 2,000g
• Capacity: 6 x 1.5ml
• Operating Temperature: Ambient
• Weight: 494g
• Dimensions: 120mm H x 130mm W x 137mm D
• Electrical: 110V;50/60Hz , 220V:50/60Hz

Small - The mini-centrifuge can easily squeeze onto a crowded countertop.

Safe - Turn centrifuge on and off without opening the lid using an independent switch.

Simple - A pop-open latch system and transparent lid allow you to monitor the sample while it spins. Polished ABS finish quickly wipes clean. Internal mini-transformer eliminates cumbersome adapters.

Quiet - The low-durometer foot grip and fiberglass-reinforced carbonate rotor assure sure-footed, noise-free operation.

Convenient - The 6 tube, fixed-angle rotor requires no unlocking, no releasing, just pop the tubes in and out. Included adapters quickly accommodate 0.5 ml tubes.

Learn More