Water Purification & Detection, Light Tables, Lab Balances & More

Our new mini-centrifuge is the perfect answer for quick spin-downs from tubewalls and caps, HPLC preparations, cell separations and micro-filtration tubes. The tiny footprint and quiet operation makes it perfect for desktop use or quick transport between countertops. A great convenience and a superb value!

Specifications:

• rpm: 6,000
• Relative Centrifugal Force: 2,000g
• Capacity: 6 x 1.5ml
• Operating Temperature: Ambient
• Weight: 494g
• Dimensions: 120mm H x 130mm W x 137mm D
• Electrical: 110V;50/60Hz , 220V:50/60Hz

Small - The mini-centrifuge can easily squeeze onto a crowded countertop.

Safe - Turn centrifuge on and off without opening the lid using an independent switch.

Simple - A pop-open latch system and transparent lid allow you to monitor the sample while it spins. Polished ABS finish quickly wipes clean. Internal mini-transformer eliminates cumbersome adapters.

Quiet - The low-durometer foot grip and fiberglass-reinforced carbonate rotor assure sure-footed, noise-free operation.

Convenient - The 6 tube, fixed-angle rotor requires no unlocking, no releasing, just pop the tubes in and out. Included adapters quickly accommodate 0.5 ml tubes.

For multi-tube mixing. Can also be used for larger vessels with covered tops. Continuous or touch-on operation. Full range speed control: 100 rpm to 3000 rpm to match your contents and vessel requirements. Interchangeable mixing surfaces: single tube rubber cup or 3 1/2" diameter resilient rubber top for beakers, etc. Acid and alkali resistant white plastic cabinet. Heavy cast metal base for greater stability. Soft foam rubber feet protect work surface and prevent "walking".

For low cost cutting of bars, pipe, angle iron, channel tubing, flat stock, rod, etc.

• Easily handles 1" solid round, 2" pipe.
• Adjustable work length stop and down stop furnished.
• 1/2" wheel arbor
• Takes 7"diameter abrasive wheel.
• 1 hp TEFC motor 1 ph (110, 220 volt) Please specify voltage.
• Dimensions - L 22" x W 10" x H 14"
• With cord and switch.
• Wheel not included.
• Spindle RPM - 4800.
• Weight 75 lbs

No Longer Available.

Please see Catalog Number 30277A for the replacement product.

Cavi-clean Liquid Detergent - An all-purpose detergent formulated to increase efficiency of ultrasonic units. Gentle to the hands. Neutral pH. Will not harm metals or their alloys. Has blood cutting agents and a rust inhibitor. Includes an excellent wetting and penetrating agent among it's features.

1 gallon container (concentrate, 1 oz per gallon of water)

Vacuum Chamber, Additional Vacuum/Gas Inlet, Muffle for Ashing and Portable Stand-Alone Air Handling System

270 Watts: - Exterior Dimensions: 13" w X 15" h X 11" d - Interior Dimensions: 12" w X 10" h X 10" d - Electrical: 115VAC*, 270 Watts - Operating Range: Ambient +3°C to 93°C 385 Watts: - Exterior Dimensions: 19" w X 21" h X 13" d - Interior Dimensions: 18" w X 16" h X 12" d - Electrical: 115VAC*, 385 Watts - Operating Range: Ambient +3°C to 93°C *All incubators are available in 230VAC at no additional charge. Please let us know at the time of your order.

120 Watts: - Exterior Dimensions: 13" w X 15" h X 11" d - Interior Dimensions: 12" w X 10" h X 10" d - Electrical: 115VAC*, 120 Watts - Operating Range: Ambient +2°C to 62°C 235 Watts: - Exterior Dimensions: 19" w X 21" h X 13" d - Interior Dimensions: 18" w X 16" h X 12" d - Electrical: 115VAC*, 235 Watts - Operating Range: Ambient +2°C to 62°C *All incubators are available in 230VAC at no additional charge. Please let us know at the time of your order.

The LBP-211 and its lower power twin, the LBP-210, have the largest cavity in the industry. It is right at home in the laboratory, on the production line or heating material for a variety of applications. Specifications: - Output power: 2,000 watts for LBP-210, 3,200 watts for LBP-211 - Required power: 208/230 volt, 1 phase, 60 Hz. (50 Hz available) - Requires dedicated 20 amp line. 30 amp NEMA 6-3DR male plug supplied Dimensions: - Outer: 25.56" d x 20.75" h x 18.56" w nominal (W/O handle) - Cavity: 21.06" d x 13" h x 9.875" w nominal - Weight: 128 pounds - Operating frequency: 2.45 GHz (an internationally regulated ISM frequency)

This is a basic laboratory microwave for staining microscope tissue samples, waste solids testing, moisture testing, chemical processing, agar heating and other laboratory processing. - Operates just as a domestic microwave oven using time and power level - 120 volt operation – needs no special wiring (230 VAC 50 Hz input available - Up to 1,000 watts of microwave power. High volume cooling for long life - 5 different power levels plus a hold feature - Simple to use touch control pad - Up to twenty multistage programs can be stored for your most popular protocols - Powered cavity exhaust to remove fumes from the cavity - Mode stirrer gives excellent uniform heating without the need of a breakable turntable common to domestic microwaves - Includes 8 feet of chemical resistant flexible duct to facilitate connection of exhaust system - Includes 2 stainless steel clamps for ease of mounting the exhaust duct - Includes adaptor to connect exhaust hose to the microwave - Cavity is 330mm wide x 205mm tall x 330mm deep (13" x 8 1/16" x 13") - Compact microwave. Uses minimal counter space. - Stainless steel cavity and cover for easy clean up, chemical resistance and long life. - Fully safety tested including for microwave leakage - Meets US FCC requirements and can be tested for Canadian CSA requirements. Options: - Vacuum/gas inlet - Extended Life Program