Laboratory Supplies - Disposables, Storage, Safety Aids & More

The most commonly used bracket. It has a slot through the front to accommodate the Pyrex inserts for wedge polishing, the SEM stub mount, as well as the L59002 Wedge Polishing Mount. Learn More

Base with 3 micrometer assemblies and case. Learn More

The LEBSD (Electron Backscatter Diffraction) Specimen Polishing Kit is based on the Model L150 micrometer controlled lapping fixture. Two mounting blocks are included to hold a 1/8" diameter pin SEM mount for plan view preparation of a Tripod Polisher SEM mount for XSEM preparation. The stubs are secured into the block with a set screw prior to loading into the lapping fixture. The kit includes a SampleSaver FIB storage container and two tier locking rack, and pin adapters for holding the L150 mounts. A pre-tilt EBSD specimen stage is included with three height segments. The low profile mount fits most SEM load locks and can be stored in the Sample Saver without removal from the pre-tilt holder. Special Features A relatively simple and inexpensive method for mechanically polishing and mounting EBSD specimens on an SEM stub, allowing quick transfer without dismounting a prepared sample. Pre-Tilt EBSD specimen stage keeps sample at a fixed angle of 70o or the complementary angle of 20o in the chamber. The process utilizes conventional, easily available, precision abrasives and is compatible with other sample preparation equipment and consumables. The Model L150 Lapping Fixture can be utilized for other routine parallel and angled polishing processes without modification. Up to 1.25" diameter mounting blocks are available. A low force Model L150L lapping fixture is available as an option. Complete process recipes, consumable supplies, and other accessories are available and include hand lapping tray, lapping and polishing machines, hot plate/cooling tray and sample mounting devices. Learn More

Most popular vise head due to its versatility and durable construction. Fits both standard and vacuum PanaVise bases. 2 1/2" wide nylon jaws open up to 2 1/4". Tough yet gentle jaws have satin finish for improved grip. Learn More

Base design allows tilting, turning and rotating of head to any position. Load control knob and split-ball features permit locking, changing position or easy head removal. Three base mounting holes allow for permanent mounting on benchtop or portability when attached to Tray Base Mount, (sku: 11494). Base diameter 5", overall height 3 13/16". Learn More

Same mechanical features as Standard PanaVise Head, except that stem is attached to rear of head to permit positioning work closer to the work bench. Heavy-duty steel jaws may be interchanged with optional accessory nylon jaws. By combining with optional Low-Profile Base, the work piece can be swung out and away from the work bench for clearance. Learn More

Separate stirring and heating switches. Stirring and heating may be used simultaneously or independently. Stirring speeds adjustable between 60-1650 rpm. Recommended for stirring squeous liquids with viscosities less than or equal to 100% glycerol. One liter flask capacity. Extended safety front separates controls from hot surfaces. Thermostat controlled temperature adjustable up to 382o C. 6" x 6" solid aluminum top plate assures fast, steady heating. Includes 1/2" and 1 1/2" stir bars. Overall dimensions: 7 1/2" deep x 6" wide x 4 3/4" high. 120 VAC, 60 Hz, 500 watts. Learn More

A general duty hot plate for use in every laboratory. Has a demand type thermostatic control which holds the temperature of the flat cast aluminum top to within +/- 5^o F. Temperature range is 200^o to 700^o F. Automatic stepless control. The sturdy SS case is attractive and easy to clean. Ample ventilation keeps controls and bench tops cool, and prolongs life of the unit. Supplied with pilot light and 6' 3" cord with three-way plug. UL and CSA approved. Operates on either 110-120 VAC or 240 VAC, 50/60 Hz. Dimensions: Top plate, 6 1/4L x 6 1/4 in.W, Overall, 7 5/8L x 65 /8W x 4 1/2 in.H.

Learn More

3" diameter top plate. Cabinet dimensions 7 1/4" x 5 1/2" x 4 3/4". Power requirements 50 watts. This unit uses the most efficient solid state thermoelectric modules yet developed. DC power is supplied to these high powered modules to control temperatures between +25^o C and -20^o C depending on the set point required. All units may use air cooling with built-in fan, or tap water cooling as the heat exchanger. Equilibrium is reached in 2-3 minutes. Lightweight, portable. Has been used successfully in recrystallizations, freezing point determinations, and temperature control for physical measurements.

Learn More