Laboratory Supplies - Disposables, Storage, Safety Aids & More
Ladd Research sells a wide variety of general purpose laboratory supplies including: disposables, report making items, transfer sheets, storage, lab tables, ovens & more.
Ideal for use as a support when installing and uninstalling the diffusion pump on the Ladd Vacuum Evaporator. Also used to sustain hot plates, flasks, beakers, baths, and other lab items. The top and bottom plates can be fixed to lab equipment or a bench by drilling and attaching with appropriate fasteners. Top plate is 21cm (8.25") diameter and accepts a vertical support rod available as an accessory, (Catalog # F18391-0002). Steam autoclavable at 121°C (250°F). Note: Do not use the lab jack to lift weight, instead, place weight on the top plate after adjusting it to the required position. Polycarbonate lab jack holds up to 6.8kg (15lb)
• Chemical and corrosion resistant with no metal parts
• Does not conduct electricity
• Can be used a bath or environments that corrode other metal lab jacks
• Precise height positioning from 76mm to 30cm (3" to 12") Learn More
Diameter: 7.9mm (5/16") accepts various clamps and other accessories. Includes two hex nuts for secure attachment to the jack top plate.
Stainless steel support rod, 46cm (18") long, attaches to Poly-Jaque™ Lab Jack to accept clamps, rings, etc Learn More
This oven is primarily for the life science processes of cell staining, immunochemistry, antigen retrieval or other post cell preparation processes. This microwave can also be used for general laboratory work where temperature control is needed. This is not intended for samples that are dry or for small volumes of reagents.
Dimesions:
- Outer: 20.125" long x 15" high x 12" deep nominal (W/O handle)
- Weight: 50 pounds Learn More
The LBP-211 and its lower power twin, the LBP-210, have the largest cavity in the industry. It is right at home in the laboratory, on the production line or heating material for a variety of applications.
Specifications:
- Output power: 2,000 watts for LBP-210, 3,200 watts for LBP-211
- Required power: 208/230 volt, 1 phase, 60 Hz. (50 Hz available)
- Requires dedicated 20 amp line. 30 amp NEMA 6-3DR male plug supplied
Dimensions:
- Outer: 25.56" d x 20.75" h x 18.56" w nominal (W/O handle)
- Cavity: 21.06" d x 13" h x 9.875" w nominal
- Weight: 128 pounds
- Operating frequency: 2.45 GHz (an internationally regulated ISM frequency) Learn More
Introducing a new extended Life program for the LBP-110 microwave. The extended Life program is priced at $475 and extends protection of your microwave to a complete 3 years. This program is in two portions, Extended Service and Refurbishment. Please download the Extended Life Program Terms attachment below for more details. Learn More
270 Watts:
- Exterior Dimensions: 13" w X 15" h X 11" d
- Interior Dimensions: 12" w X 10" h X 10" d
- Electrical: 115VAC*, 270 Watts
- Operating Range: Ambient +3°C to 93°C
385 Watts:
- Exterior Dimensions: 19" w X 21" h X 13" d
- Interior Dimensions: 18" w X 16" h X 12" d
- Electrical: 115VAC*, 385 Watts
- Operating Range: Ambient +3°C to 93°C
*All incubators are available in 230VAC at no additional charge. Please let us know at the time of your order. Learn More
For multi-tube mixing. Can also be used for larger vessels with covered tops. Continuous or touch-on operation. Full range speed control: 100 rpm to 3000 rpm to match your contents and vessel requirements. Interchangeable mixing surfaces: single tube rubber cup or 3 1/2" diameter resilient rubber top for beakers, etc. Acid and alkali resistant white plastic cabinet. Heavy cast metal base for greater stability. Soft foam rubber feet protect work surface and prevent "walking".
Learn More
