General Laboratory Supplies

Laboratory Supplies - Disposables, Storage, Safety Aids & More

Ladd Research sells a wide variety of general purpose laboratory supplies including: disposables, report making items, transfer sheets, storage, lab tables, ovens & more.

Items 61 to 90 of 392 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction
/

80623 - Viewing Box - 24" x 36" - NLA

Viewing Box - 24" x 36" overall size. Contains five 18 watt bulbs.
Call For Price
The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Tripod Polisher for SEM & Accessories

The Tripod Polisher, L590SEM, comes complete with sufficient accessories to prepare samples for scanning electron microscopy (SEM). The following accessories are included at no charge with the purchase of the L590SEM. (prices included if you wish to purchase additional accessories)

Starting at: $6.50

/

80624 - Viewing Box - 36" x 48" - NLA

Viewing Box - 36" x 48" overall size. Contains five 18 watt bulbs.
Call For Price
80640 - Light Box - 12" x 14" - NLA

80640 - Light Box - 12" x 14" - NLA

Light Box - 12" x 14" overall size. Contains two 8 watt bulbs. Portable 5/8" Thick Solid Oak Framed Models
Call For Price
L03068 - Optional Tripod Polisher Accessory - X-section L-bracket

L03068 - Optional Tripod Polisher Accessory - X-section L-bracket

This bracket utilizes a small clamping mechanism on the face of the bracket to allow samples to be clamped without the need for using mounting waxes.
$157.00
L59001 - Optional Tripod Polisher Accessory - Ion Mill Stage

L59001 - Optional Tripod Polisher Accessory - Ion Mill Stage

Designed to accept the special SEM stud used with the Tripod Polisher. The SEM stud is mounted in the Ion Mill Stage and sample is briefly ion milled to remove fine scratches, polishing debris and to give surface topography prior to SEM analysis.
$205.00
L03080 - Optional Tripod Polisher Accessory - Parallel Polishing Mount, Stainless Steel

L03080 - Optional Tripod Polisher Accessory - Parallel Polishing Mount, Stainless Steel

A round stainless steel disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens. 1.25" Diameter
$43.00
80641 - Light Box - 11" x 18" - NLA

80641 - Light Box - 11" x 18" - NLA

Light Box - 11" x 18" overall size. Contains two 15 watt bulbs. Portable 5/8" Thick Solid Oak Framed Models
Call For Price
L03061 - Optional Tripod Polisher Accessory - Planarizing Tool

L03061 - Optional Tripod Polisher Accessory - Planarizing Tool

This tool is a large square piece of aluminum used to planarize the delrin feet of the Tripod Polisher.
$228.00
L03060 - Optional Tripod Polisher Accessory - Parallel Polishing Mount

L03060 - Optional Tripod Polisher Accessory - Parallel Polishing Mount

A round aluminum disc with a Pyrex rod mounted into the center of the disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens.
$72.00
80643 - Light Box - 16" x 18" - NLA

80643 - Light Box - 16" x 18" - NLA

Light Box - 16" x 18" overall size. Contains three 15 watt bulbs. Portable 5/8" Thick Solid Oak Framed Models
Call For Price
80644 - Light Box - 18" x 24" - NLA

80644 - Light Box - 18" x 24" - NLA

Light Box - 18" x 24" overall size. Contains three 18 watt bulbs. Portable 5/8" Thick Solid Oak Framed Models
Call For Price
Porta Trace Light Table

80647 - Light Table - 24" x 36" - NLA

Light Table - 24" x 36" overall size. Contains four 18 watt fluorescent bulbs.

An LED version of this table will be arriving this summer!!!!!

Call For Price
Porta Trace Light Table

80648 - Light Table - 36" x 48" - NLA

Light Table - 36" x 48" overall size. Contains four 40 watt fluorescent bulbs.

An LED version of this table will be arriving this summer!!!!!

Call For Price
Desktop Standup Viewing Box - NLA

Desktop Standup Viewing Box - NLA

Portable, lightweight viewer for film. 10" x 12" overall size. Contains 8 watt bulb.

Starting at: Call For Price

Viewing Box - 11" x 18" - NLA

Viewing Box - 11" x 18" - NLA

Viewing Box - 11" x 18" overall size.

Starting at: Call For Price

/

Viewing Box - 16" x 18" - NLA

Viewing Box - 16" x 18" overall size.

Starting at: Call For Price

Optional Tripod Polisher Accessory - Diamond Lapping Film

Optional Tripod Polisher Accessory - Diamond Lapping Film

All discs 8" in diameter with pressure sensitive adhesive

Starting at: $179.95

P-80 Emulsion 10ml tube

P-80® Emulsion Temporary Assembly Lubricant

P-80® Emulsion Temporary Assembly Lubricant eases installation of tight-fitting rubber and plastic parts by reducing the force needed for assembly. Once assembly is complete, the lubricant dries and the part returns to its original condition. P-80 Temporary Assembly Lubricants can be applied manually or automatically, by dip, brush, or spray techniques. P-80 Emulsion Temporary Assembly Lubricant is used to install hoses, o-rings, seals, bushings, gaskets, grommets, grips, and many other rubber and plastic parts. Use P-80 Emulsion when a thin film of lubricant is desired. Typical viscosity of P-80 Emulsion: 110 cps at 25° C.

Starting at: $16.95

P-80 THIX 10ml Tube

P-80® THIX Temporary Assembly Lubricant Gel

P-80® THIX Temporary Assembly Lubricant gel eases installation of tight-fitting rubber and plastic parts by reducing the force needed for assembly. Once assembly is complete, the lubricant dries and the part returns to its original condition. P-80 THIX is especially useful in overhead and vertical assembly operations because it remains where it is applied without dripping. P-80 THIX thins out under pressure so it can be used in automated systems or applied manually by dip, brush, or spray techniques. P-80 THIX Temporary Assembly Lubricant is used to install hoses, o-rings, seals, bushings, gaskets, grommets, grips, and many other rubber and plastic parts. Use P-80 THIX when a thick coating of lubricant is needed, when it is important that the lubricant stay where it is applied, and/or when a prolonged drying time is desired. Typical viscosity: 7,500 cps at 25° C

Starting at: $14.95

Cavi-Clean

11715 - Cavi-Clean Liquid Detergent

Cavi-clean Liquid Detergent - An all-purpose detergent formulated to increase efficiency of ultrasonic units. Gentle to the hands. Neutral pH. Will not harm metals or their alloys. Has blood cutting agents and a rust inhibitor. Includes an excellent wetting and penetrating agent among it's features.

1 gallon container (concentrate, 1 oz per gallon of water)

$59.95
Cavi-Clean Additive

32110 - Cavi-Clean Additive

Highly soluble powder designed exclusively for use in ultrasonic cleaners to greatly increase the cleaning action of Cavi-Clean Liquid Detergent (sku: 11715). Super-strong, even removes metal oxides. Recommended use is within a glass beaker. Due to it's potency, Cavi-Clean Additive should not be used with other detergents and should be used only in ultrasonic cleaners. Avoid using where more than one type of metal is present.

1 pound package.

$30.95
Laboratory Cut-Off Saw

30280 - Laboratory Cut-Off Saw, 115 VAC

No Longer Available.

Please see Catalog Number 30277 for the replacement product. 

Call For Price
Laboratory Cut Off Saw

30277 - Laboratory Cut-Off Saw with Heavy Duty Motor, 115 VAC

3" reinforced wheels leave minimal burr. Precision cuts for a wide variety of materials. Maximum Cutting Height: 5/8" 10,000 RPM 1/5 HP Motor with sealed long-life heavy duty bearings and a dust resistant seal. This saw is recommended for glass and ceramics. The diamond wheel running at maximum of 6000 rpm is recommended for these harder materials. 1" cutting capacity. 115 VAC
$555.00
Laboratory Cut-Off Saw

30280A - Laboratory Cut-Off Saw, 220 VAC

No Longer Available.

Please see Catalog Number 30277A for the replacement product.

Call For Price
Cut-Off Saw with Heavy Duty Motor and Miter Vise

30277M - Laboratory Cut-Off Saw with Heavy Duty Motor and Miter Vise, 115 VAC

3" reinforced wheels leave minimal burr. Precision cuts for a wide variety of materials. Maximum Cutting Height: 5/8" 10,000 RPM 1/5 HP Motor with sealed long-life heavy duty bearings and a dust resistant seal. This saw is recommended for glass and ceramics. The diamond wheel running at maximum of 6000 rpm is recommended for these harder materials. 1" cutting capacity. 115 VAC, has miter vise
$654.95
Cut-Off Saw with Heavy Duty Motor and Miter Vise

30277AM - Laboratory Cut-Off Saw with Heavy Duty Motor and Miter Vise, 220 VAC

3" reinforced wheels leave minimal burr. Precision cuts for a wide variety of materials. Maximum Cutting Height: 5/8" 10,000 RPM 1/5 HP Motor with sealed long-life heavy duty bearings and a dust resistant seal. This saw is recommended for glass and ceramics. The diamond wheel running at maximum of 6000 rpm is recommended for these harder materials. 1" cutting capacity. 220 VAC, has miter vise
$849.95
Laboratory Cut-Off Saw

30277A - Laboratory Cut-Off Saw with Heavy Duty Motor, 220 VAC

3" reinforced wheels leave minimal burr. Precision cuts for a wide variety of materials. Maximum Cutting Height: 5/8" 10,000 RPM 1/5 HP Motor with sealed long-life heavy duty bearings and a dust resistant seal. This saw is recommended for glass and ceramics. The diamond wheel running at maximum of 6000 rpm is recommended for these harder materials. 1" cutting capacity. 220 VAC
$649.95
Carbon-Cutting Laboratory Saw

30277C - Carbon-Cutting Laboratory Cut-Off Saw

Includes Laboratory Cut-Off Saw with Heavy Duty Motor 115 VAC, Sawtooth Cut-Off Wheel, and Arbor Adapter
$649.95

Items 61 to 90 of 392 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies