Page 4 | Grids, Grid Storage Boxes and Support Film | Gilder Grids & Grid Punch

Ladd Parallel Bar Grids

Available in mesh 100, 150 and 200; as well as in either Ni or Cu. Comes in vials of 100. Bars run in only one direction.

Starting at: $22.95

JEOL - Angled, Aluminum Specimen Mount

10mm diameter x 10mm high with 45º angle.

Starting at: $16.25

ISI, JEOL - Angled, Aluminum Specimen Mount

15 mm diameter. Available in heights of 15 mm or 10 mm. 45º angle.

Starting at: $15.95

JEOL - With Groove, Aluminum Specimen Mount

JEOL Aluminum Specimen Mount with a groove.

Starting at: $13.75

JEOL - No Groove, Aluminum Specimen Mount

JEOL Aluminum Specimen Mount.

Starting at: $7.95

Ladd Double Grids - Hexagonal Mesh - Mesh 75/300

Available in Cu, Au, Ni and Ag. 70%/24% open area. Comes in vials of 100.

Starting at: Call For Price

Ladd Double Grids - Hexagonal Mesh - Mesh 100/200

Available in Cu, Au, Ni and Ag. 58%/42% open area. Comes in vials of 100.

Starting at: Call For Price

ISI, JEOL, Aluminum Specimen Mount

Measurements are diameter (mm) x height (mm).

Starting at: $8.95

Ladd Double Grids - Hexagonal Mesh - Mesh 50/100

Available in Cu, Au, Ni and Ag. 73%/58% open area. Comes in vials of 100.

Starting at: Call For Price

JEOL JSM 840, Aluminum Specimen Mount

12.5mm diameter x 10mm high.

Starting at: $13.25

Ladd Parallel Bar Grids With Bisecting Divider

Available in mesh 100, 150 and 200; as well as in either Ni or Cu. Comes in vials of 100. Bars run in only one direction with a divider which bisects the parallel bars.

Starting at: $24.95

Ladd Multiple Slot Grids

Available in Cu and Ni metals. Comes in vials of 100. Four slots of varying widths within a 2 mm circle. Slot widths include 0.6, 0.4, 0.3 and 0.2 mm. Grid is 3 mm in diameter.

Starting at: $25.95

Ladd Multiple Hole Grids

Available in Cu and Ni metals. Comes in vials of 100. Six holes of varying diameters within a 2 mm circle. Hole diameters include 1.0, 0.8, 0.6, 0.5, 0.4 and 0.3 mm. Grid is 3 mm in diameter.

Starting at: $25.95

Extra Thick - Single Round Hole Grids

Available in Copper, Molybdenum, and Gold. Available hole sizes: .4mm, .6mm, .8mm, 1mm and 1.5mm. Grid Thicknesses vary from 30 µm to 50 µm for largest hole sizes. Grids are 3 mm in diameter.

Starting at: $34.95

12431 - JEOL TEM SCAN 100-CX Specimen Mount

Boat-shaped specimen mount made from 0.5 mm copper. 2.4 cm long x 5.6 mm wide with 4 mm high sides. Specimen framing marks in center measure 9 mm x 3 mm.

$4.55

60385 - Spring Clip Specimen Mount

Two phosphor bronze clips, each 12.7 mm long, hold specimen and assure grounding while attached to 25.4 mm surface of specimen mount. Often eliminates need for conducting paint. Also available in 1 and 3 clip versions.

$52.95

60298 - Clamping Specimen Mount

Two semi-circular clamping bars, each held with two screws, provide anchoring for thin specimens or fibers. Excellent holder for viewing fibers under tension. Top surface 25.4 mm diameter. Pin 3.2 mm.

$52.95

60407 - Adjustable Specimen Mount

For use with metallurgical mounts or large, oddly shaped specimens between 16 mm and 25.4 mm in diameter. Three set screws in side walls of mount anchor object in place. Made of aluminum, includes hex wrench. Pin 3.2 mm.

$109.95

Ladd Single Slot Grids

Available in Cu and Ni metals. Available in 2000µm x 1000µm, 2000µm x 1000µm, 1500µm x 200µm, 1000µm x 200µm and 2000µm x 500µm hole sizes. Comes in vials of 100.

Starting at: $36.95

60406 - 4 Grid Carbon Specimen Mount

For x-ray analysis. Same as Carbon Specimen Mount (sku: 60200) except it has 4 insets on the top surface to hold carbon or beryllium TEM grids.

$3.95

Ladd Double Grids - Hexagonal Mesh - Mesh 400/400

Available in Cu, Au, Ni and Ag. 14% open area. Comes in vials of 100.

Starting at: Call For Price

Ladd Double Grids - Hexagonal Mesh - Mesh 300/300

Available in Cu, Au, Ni and Ag. 26% open area. Comes in vials of 100.

Starting at: Call For Price

AMRAY 1000/1200, Aluminum Specimen Mount

Top surface 25.4mm diameter, pin 3.2mm.

Starting at: $14.95

AMRAY 1000/1200/1400, Aluminum Specimen Mount

Aluminum specimen mount, top surface 12.7mm diameter, pin 3.2mm.

Starting at: $9.95

Ladd Double Grids - Square Mesh

Available in Cu and Ni varieties,mesh 75/75 and 100/100, as well as 72% and 58% open area. Comes in vials of 100. Both sides are identical.

Starting at: $41.95

Ladd-a-Tab Grids - Cu

Available in mesh 100-400, and 64%, 46%, 29% and 23% open area. Comes in vials of 100. Flexible tab aids in handling grids during specimen preparation and can be used for grid orientation. Holding grids by tab avoids damage to grid surface. Tab may be easily removed with Ladd Detabber.

Starting at: $39.95

Ladd Rectangular Mesh Grids

Available in both mesh 75/300 and mesh 100/400, Cu and Ni and 46% and 31% open area. Comes in vials of 100. Open areas are rectangular.

Starting at: $20.95

Ladd Thin Bar Hexagonal Mesh Grids

Available in mesh 200-400, both Cu and Ni metals and 84% and 77% open area varieties. Comes in vials of 100. Combines the thin bar square mesh features with additional supportive structure provided by hexagonal mesh. Grid bars of 400 mesh thin bar hexagonal mesh grids are less than 7 microns wide.

Starting at: $36.95

formvarbridge - Formvar-Coated Bridge

Call Ladd for more information on this product.

Call For Price

10840 - Smith Grid Coating Trough

Simplifies the process of coating grids with ultra thin films. Improves reliability and reproducibility of coatings. Use of guide slot minimizes hand vibrations when floating films. High visibility of floating film provided by transparent wall and three opaque walls. Water level controlled by 5 ml syringe in parallel with 30 ml syringe. Complete with syringes, tubing and perforated tray for holding grids on filter paper.

Call For Price

My Account

Grids, Storage Boxes and Support Film - Specimen Mounts

Ladd Parallel Bar Grids

JEOL - Angled, Aluminum Specimen Mount

ISI, JEOL - Angled, Aluminum Specimen Mount

JEOL - With Groove, Aluminum Specimen Mount

JEOL - No Groove, Aluminum Specimen Mount

Ladd Double Grids - Hexagonal Mesh - Mesh 75/300

Ladd Double Grids - Hexagonal Mesh - Mesh 100/200

ISI, JEOL, Aluminum Specimen Mount

Ladd Double Grids - Hexagonal Mesh - Mesh 50/100

JEOL JSM 840, Aluminum Specimen Mount

Ladd Parallel Bar Grids With Bisecting Divider

Ladd Multiple Slot Grids

Ladd Multiple Hole Grids

Extra Thick - Single Round Hole Grids

12431 - JEOL TEM SCAN 100-CX Specimen Mount

60385 - Spring Clip Specimen Mount

60298 - Clamping Specimen Mount

60407 - Adjustable Specimen Mount

Ladd Single Slot Grids

60406 - 4 Grid Carbon Specimen Mount

Ladd Double Grids - Hexagonal Mesh - Mesh 400/400

Ladd Double Grids - Hexagonal Mesh - Mesh 300/300

AMRAY 1000/1200, Aluminum Specimen Mount

AMRAY 1000/1200/1400, Aluminum Specimen Mount

Ladd Double Grids - Square Mesh

Ladd-a-Tab Grids - Cu

Ladd Rectangular Mesh Grids

Ladd Thin Bar Hexagonal Mesh Grids

formvarbridge - Formvar-Coated Bridge

10840 - Smith Grid Coating Trough

Our Address

Newsletter

Our Company

Customer Service