Available in mesh 100, 150 and 200; as well as in either Ni or Cu. Comes in vials of 100. Bars run in only one direction with a divider which bisects the parallel bars. Learn More
Available in Cu and Ni metals. Comes in vials of 100. Four slots of varying widths within a 2 mm circle. Slot widths include 0.6, 0.4, 0.3 and 0.2 mm. Grid is 3 mm in diameter. Learn More
Available in Cu and Ni metals. Comes in vials of 100. Six holes of varying diameters within a 2 mm circle. Hole diameters include 1.0, 0.8, 0.6, 0.5, 0.4 and 0.3 mm. Grid is 3 mm in diameter. Learn More
Available in Copper, Molybdenum, and Gold. Available hole sizes: .4mm, .6mm, .8mm, 1mm and 1.5mm. Grid Thicknesses vary from 30 µm to 50 µm for largest hole sizes. Grids are 3 mm in diameter. Learn More
Boat-shaped specimen mount made from 0.5 mm copper. 2.4 cm long x 5.6 mm wide with 4 mm high sides. Specimen framing marks in center measure 9 mm x 3 mm. Learn More
Two phosphor bronze clips, each 12.7 mm long, hold specimen and assure grounding while attached to 25.4 mm surface of specimen mount. Often eliminates need for conducting paint. Also available in 1 and 3 clip versions. Learn More
Two semi-circular clamping bars, each held with two screws, provide anchoring for thin specimens or fibers. Excellent holder for viewing fibers under tension. Top surface 25.4 mm diameter. Pin 3.2 mm. Learn More
For use with metallurgical mounts or large, oddly shaped specimens between 16 mm and 25.4 mm in diameter. Three set screws in side walls of mount anchor object in place. Made of aluminum, includes hex wrench. Pin 3.2 mm. Learn More
Available in Cu and Ni metals. Available in 2000µm x 1000µm, 2000µm x 1000µm, 1500µm x 200µm, 1000µm x 200µm and 2000µm x 500µm hole sizes. Comes in vials of 100. Learn More
For x-ray analysis. Same as Carbon Specimen Mount (sku: 60200) except it has 4 insets on the top surface to hold carbon or beryllium TEM grids. Learn More
