Grids, Grid Storage Boxes and Support Film

Grids, Storage Boxes and Support Film - Specimen Mounts

Ladd Research sells a wide variety of microscopy grids, grid storage boxes and support film. Products include grid punches, specimen mounts and more.

Items 31 to 60 of 180 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction
JEOL - Angled, Aluminum Specimen Mount

JEOL - Angled, Aluminum Specimen Mount

10mm diameter x 10mm high with 45º angle.

Starting at: $16.25

Ladd Parallel Bar Grids

Ladd Parallel Bar Grids

Available in mesh 100, 150 and 200; as well as in either Ni or Cu. Comes in vials of 100. Bars run in only one direction.

Starting at: $22.95

JEOL JSM 840, Aluminum Specimen Mount

JEOL JSM 840, Aluminum Specimen Mount

12.5mm diameter x 10mm high.

Starting at: $13.25

Ladd Parallel Bar Grids With Bisecting Divider

Ladd Parallel Bar Grids With Bisecting Divider

Available in mesh 100, 150 and 200; as well as in either Ni or Cu. Comes in vials of 100. Bars run in only one direction with a divider which bisects the parallel bars.

Starting at: $24.95

60406 - 4 Grid Carbon Specimen Mount

60406 - 4 Grid Carbon Specimen Mount

For x-ray analysis. Same as Carbon Specimen Mount (sku: 60200) except it has 4 insets on the top surface to hold carbon or beryllium TEM grids.
$3.95
Ladd Single Slot Grids

Ladd Single Slot Grids

Available in Cu and Ni metals. Available in 2000µm x 1000µm, 2000µm x 1000µm, 1500µm x 200µm, 1000µm x 200µm and 2000µm x 500µm hole sizes. Comes in vials of 100.

Starting at: $36.95

60407 - Adjustable Specimen Mount

60407 - Adjustable Specimen Mount

For use with metallurgical mounts or large, oddly shaped specimens between 16 mm and 25.4 mm in diameter. Three set screws in side walls of mount anchor object in place. Made of aluminum, includes hex wrench. Pin 3.2 mm.
$109.95
Clamping Specimen Mount

60298 - Clamping Specimen Mount

Two semi-circular clamping bars, each held with two screws, provide anchoring for thin specimens or fibers. Excellent holder for viewing fibers under tension. Top surface 25.4 mm diameter. Pin 3.2 mm.
$52.95
60385 - Spring Clip Specimen Mount

60385 - Spring Clip Specimen Mount

Two phosphor bronze clips, each 12.7 mm long, hold specimen and assure grounding while attached to 25.4 mm surface of specimen mount. Often eliminates need for conducting paint. Also available in 1 and 3 clip versions.
$52.95
12431 - JEOL TEM SCAN 100-CX Specimen Mount

12431 - JEOL TEM SCAN 100-CX Specimen Mount

Boat-shaped specimen mount made from 0.5 mm copper. 2.4 cm long x 5.6 mm wide with 4 mm high sides. Specimen framing marks in center measure 9 mm x 3 mm.
$4.55
Extra Thick - Single Round Hole Grids

Extra Thick - Single Round Hole Grids

Available in Copper, Molybdenum, and Gold. Available hole sizes: .4mm, .6mm, .8mm, 1mm and 1.5mm. Grid Thicknesses vary from 30 µm to 50 µm for largest hole sizes. Grids are 3 mm in diameter.

Starting at: $34.95

Ladd Multiple Hole Grids

Ladd Multiple Hole Grids

Available in Cu and Ni metals. Comes in vials of 100. Six holes of varying diameters within a 2 mm circle. Hole diameters include 1.0, 0.8, 0.6, 0.5, 0.4 and 0.3 mm. Grid is 3 mm in diameter.

Starting at: $25.95

Ladd Multiple Slot Grids

Ladd Multiple Slot Grids

Available in Cu and Ni metals. Comes in vials of 100. Four slots of varying widths within a 2 mm circle. Slot widths include 0.6, 0.4, 0.3 and 0.2 mm. Grid is 3 mm in diameter.

Starting at: $25.95

Index I Grids

Index I Grids

Available in Cu and Ni metals. Comes in vials of 100. Reference numbers and letters provide a permanent reference to important grid areas. Invaluable in correlating light and electron microscope studies.

Starting at: $26.95

Cambridge, B & L, CAMSCAN, ETEC, Philips, etc. - 12 Pack

Cambridge, B & L, CAMSCAN, ETEC, Philips, etc., Carbon Specimen Mount

Top surface 12.7mm diameter. Pin 3.2mm diameter.

Cambridge does not include S-4. 

Starting at: $35.95

AMRAY 1000/1200/1400 - 12 Pack

AMRAY 1000/1200/1400, Carbon Specimen Mount

Top surface 12.7 mm diameter. Pin 3.2mm diameter.

Starting at: $34.95

London Finder Grids

London Finder Grids

Available in Cu and Ni metals. Comes in vials of 100. Reference numbers and letters provide a permanent reference to important grid areas. Invaluable in correlating light and electron microscope studies.

Starting at: Call For Price

Cambridge S-4 (Carbon)

Cambridge S-4, Carbon Specimen Mount

Top surface 31.7 mm diameter.

Starting at: $69.95

G200F4 tem finder grid

22770 - Gilder Index Grids for Asbestos Analysis - 200 Mesh - Cu

Comes in vials of 100. Meet AHERA requirements. Pitch is 125 microns, Bar width is 10 microns +/- 2 microns, Hole width is 115 microns +/- 2 microns, Index identification: Horizontal A-J, Vertical 1-10.
$44.95
Hexagonal London Finder Grids

Hexagonal London Finder Grids

Available in Cu,Ni and Au metals. Comes in vials of 100. Reference numbers and letters provide a permanent reference to important grid areas. Invaluable in correlating light and electron microscope studies. Hexagonal mesh structure for additional support.

Starting at: Call For Price

ISI, JEOL (Carbon)

ISI, JEOL, Carbon Specimen Mount

Dimensions are 15 mm diameter and a height of either 5 mm, 10 mm, or 15 mm.

Starting at: $22.95

JEOL Carbon

JEOL, Carbon Specimen Mount

Available in either a 9.5 mm diameter and 9.5 mm height, or a 10 mm diameter and 9.5 mm height.

Starting at: $22.95

Carbon Planchet - 12.7 mm x 1.6 mm - 10 Pack

60430 - Carbon Planchet - 12.7 mm x 1.6 mm - 10 Pack

Especially helpful in x-ray analysis. Packaged in quantities of 10 or 100. For attachment to standard metal specimen mounts or for use with Planchet Holders.
$19.95
12434 - Carbon Planchet - Specially Smooth Planchet - 12.7 mm x 1.6 mm - 10 Pack

12434 - Carbon Planchet - Specially Smooth Planchet - 12.7 mm x 1.6 mm - 10 Pack

Especially helpful in x-ray analysis. Packaged in quantities of 10 or 100. For attachment to standard metal specimen mounts or for use with Planchet Holders.
$31.95
60421 - Carbon Planchet - Specially Smooth Planchet - 9 mm x 1.6 mm - 10 Pack

60421 - Carbon Planchet - Specially Smooth Planchet - 9 mm x 1.6 mm - 10 Pack

Especially helpful in x-ray analysis. Packaged in quantities of 10 or 100. For attachment to standard metal specimen mounts or for use with Planchet Holders.
$21.95
Smooth Carbon Planchet

12435 - Carbon Planchet - Specially Smooth Planchet - 12.7 mm x 3.2 mm - 10 Pack

Especially helpful in x-ray analysis. Packaged in quantities of 10 or 100. For attachment to standard metal specimen mounts or for use with Planchet Holders.
$32.95
12435F - Carbon Planchet - Specially Smooth - Silicon Free - 12.7 mm x 3.2 mm - 10 Pack

12435F - Carbon Planchet - Specially Smooth - Silicon Free - 12.7 mm x 3.2 mm - 10 Pack

Especially helpful in x-ray analysis. Packaged in quantities of 10 or 100. For attachment to standard metal specimen mounts or for use with Planchet Holders.
$40.95
12436 - Carbon Planchet - Specially Smooth - 19 mm x 1.6 mm - 10 Pack

12436 - Carbon Planchet - Specially Smooth - 19 mm x 1.6 mm - 10 Pack

Especially helpful in x-ray analysis. Packaged in quantities of 10 or 100. For attachment to standard metal specimen mounts or for use with Planchet Holders.
$33.95
12437 - Carbon Planchet - Specially Smooth Planchet - 19 mm x 3.2 mm - 10 Pack

12437 - Carbon Planchet - Specially Smooth Planchet - 19 mm x 3.2 mm - 10 Pack

Especially helpful in x-ray analysis. Packaged in quantities of 10 or 100. For attachment to standard metal specimen mounts or for use with Planchet Holders.
$31.95
Carbon Planchet - 12.7 mm x 3.2 mm - 10 Pack

60435 - Carbon Planchet - 12.7 mm x 3.2 mm - 10 Pack

Especially helpful in x-ray analysis. Packaged in quantities of 10 or 100. For attachment to standard metal specimen mounts or for use with Planchet Holders.
$20.95

Items 31 to 60 of 180 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies