For emergency flushing of eyes with sterile ophthalmic wash liquid from squeeze bottle. Molded bracket supports the bottle and discharge tube. Spray cup at top of bottle is placed against the affected eye and bottle is squeezed repeatedly, directing a gently stream through a perforated plate. Molded of high-impact, green plastic, readily identifiable in emergency situations. Clear, molded dust cover keeps eye cup free of contamination, yet is easily released in emergency situations. Wall-mountable station comes complete with eyewash bottle, mirror and instructions. Ophthalmic wash solution sold separately. Overall size: 44 cm x 38 cm x 9 cm , reinforced for wall hanging. 480 ml capacity. Learn More
Effective, safe and fast method to contain hazardous liquid spills involving acids (except hydrofluoric acid), caustics, solvents or oils. Pillows are filled with an amorphous silicate absorbent enclosed in a chemical resistant, porous polyolefin pillow - eliminates need for loose, messy absorbents. Superior absorbing properties - pillows absorb their capacity within seconds after making contact with the spill. Once liquid spill is contained, simply dispose of pillow according to appropriate safety guidelines.
Comes in 250 ml, 1 L, and 4 L absorbing capacities Learn More
Provides safe handling and storage of hazardous liquids. Molded of opaque red chemically resistant polyethylene. Threaded top and bottom of jacket unscrew to insert 4 liter or 1 gallon bottle then screw together tightly for safety closure. Bottle cap remains exposed, allowing easy pouring. Acts as a shock absorber to help prevent breakage due to minor jolts, bumps or falls. Provides protection should bottle break; hazardous contents and broken glass are contained within jacket. Protects solvents from degradation by light due to jacket's opacity. Learn More
Center It is a tool for drilling pipe and other round objects. Center It is made specifically for use in a drill press. The 7/16" groove with a 118 degree angle lets you bottom drill bit to center v-block. The 5 " long, 4" wide V-block bolts to the drill press table and enables the drilling of round pieces parallel and centered. This allows you to drill any size of pipe and wood dowels.
The grooves on the outer sides eliminate slippage while holding pipes, etc., for sawing on job sites or other applications. To use, simply place Center It on the drill press table, run the bit down (with motor off) to hold the jig centered on the bit, then bolt the jig to press table. No clamping of the tube is necessary since the angled flats of the jig hold it centered. Holes will automatically be centered on the tube with no center-punching necessary. If tubing is too large to drill in a single operation it can simply be turned over.
Learn More
Each of the 60 square grids is identified using a base two binary numbering system. The six binary number symbols appear on the bottom grid bars along the horizontal axis. Zero is represented by a short pillar and one by a longer pillar.
The second image is an enlarged view of grid square #9 - a long pillar at the extreme right represents decimal 1 and a long pillar fourth from the right represents a decimal 8. Learn More
