All Products
Starting at:
Call For Price
DAG T-502 is a combination of specially processed carbon particles in a fluoroelastomer resin system designed to provide high resistance values. Solvent is methyl ethyl ketone. Also known as Conducting Graphite Paint. Formerly known as Electrodag 502. New Name: Bonderite S-FN T-502 Acheson
Starting at:
$48.95
Graphite lubricating resistance coating. Aerodag® G offers excellent adhesion to most plastics. This feature, combined with high lubricity and electrical properties, makes this product especially valuable in the design of lightweight electrical/electronic parts. NEW NAME: Bonderite L-GP G Acheson 10.5 oz. aerosol
Starting at:
$59.95
Electrodag 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many nonconductive substrates, including most plastics. New Name: Loctite EDAG 154 E&C Isopropanol solvent.
Starting at:
$116.95
Dag 154 provides clean,long-wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush or dip techniques. New Name: Bonderite L-GP 154 Acheson Isopropanol solvent.
Starting at:
Call For Price
Please Note!! DDSA IS BACK IN STOCK!!! We apologize for the delay. Comes in 250ml and one gallon sizes. Dodecenyl Succinic Anhydride.
Starting at:
$42.95
Starting at:
$139.95
Use this two part electrically conductive silver epoxy for adhering microscope samples and solderless connections. Also good for bonding in electric design, prototype and repair projects. Applications include circuit board repair, surface mount connections, static discharge, shielding and grounding. Ideal for bonding of heat sensitive components. Curing time as little as ten minutes when 150-250o F is applied. Resistivity is 0.001 ohm-cm. 14 gram kit (7g each resin and hardener). Please Note!! There is currently an extreme shortage of NSA and it is back-ordered until at least January of 2027. Our staff is working hard to find another source of this important chemical and we will post here when another source becomes available. Nonenyl Succinic Anhydride, 450 ml This pen is great for adhering samples to SEM stubs. Designed for making instant conductive silver traces, the specially formulated silver-bearing thermoplastic polymer dries in minutes at room temperature. Valved pen tip allows smooth flow with normal writing pressure and is spring loaded to prevent clogging. Pen tip is approximately 1/16" in diameter. If you wish to use the pen for traces, solderable terminations are possible using a 250o F cure for 10-15 minutes. Tin, lead, or silver solder can be used (do not exceed 350 o F for more than 5 seconds.) Each pen is filled with approximately 100 feet worth of traces. Approximately 39-45% silver with less than 10 microns in diameter. Thinner is butyl acetate. Product Weight: 8.5 g.
Bonderite S-FN T-502 Acheson (known as DAG T-502 & Conducting Graphite Paint)
Bonderite L-GP G Acheson (known as Aerodag G)
Loctite EDAG 154 (known as Electrodag 154 & Colloidal Graphite Paint)
Bonderite L-GP 154 Acheson (known as DAG 154)
DDSA - Dodecenyl Succinic Anhydride
NMA - Nadic Methyl Anhydride (Methyl Norbornene Dicarboxylic Anhydride)
Conductive Silver Epoxy Kit
21355 - NSA - Nonenyl Succinic Anhydride - 450 ml
60803 - Conductive Silver Pen
