Product Index - Ladd Research

SC6.2SC - Sputter Coater Small Glass Cylinder Support

offers protection for glass cylinder when taken off machine. Avoid contamination and breakage of cylinder and protect the L-gasket from damage. For 4.5" x 6" glass jars

$40.00

SC6.2MC - Sputter Coater Medium Glass Cylinder Support

Offers protection for glass cylinder when taken off machine. Avoid contamination and breakage of cylinder and protect the L-gasket from damage. For 6.6" x 8" glass jars

Call For Price

Colloidal Silica Products

Colloidal products available in 16 oz bottles

Starting at: $27.00

SKU: 21810 Round Cavity - 10mm diameter x 1.8mm deep, 12 numbered depressions

Come in three different diameters. These molds are made from a special blue-colored silicone rubber. When hardened, these discs are easily removed from the mold by flexing it slightly. Can be baked up to a temperature of 204 degrees Celsius.

Starting at: $18.95

SC6.2C - Sputter Coater Customized Glass Cylinder Support

Offers protection for glass cylinder when taken off machine. Avoid contamination and breakage of cylinder and protect the L-gasket from damage. Customized for any size

Call For Price

21825 - Pyramid-Tip Silicone Mold

Produces pyramid-tip blocks, which are of great assistance where orientation of specimen material is difficult. The blocks are readily attached to a standard plastic cylinder (No. 21830) with cyanoacrylate glue (SuperGlue). Makes thirty blocks 5 mm high on a 6 mm square base. Tip same as 00 BEEM capsule. Can be baked up to a temperature of 204 degrees Celsius. Package of 3 molds.

$41.95

22350 - Slide Embedding Mold

Produces three 76 mm x 25.4 mm x 2.2 mm epoxy microscope slides.

$24.95

Abrasive Suspensions

Abrasive suspensions available in 16 oz bottles

Starting at: $41.00

Chang Monolayer Embedding Mold - 11mm x 22mm cavities

Chang Monolayer Embedding Molds and Glass Coverslips

Molds and coverslips purchased separately. Can be baked up to a temperature of 204 degrees Celsius.

Starting at: Call For Price

Polishing Cloths

Polishing cloths, 8" diameter (except Polychem Cloth - 12" Diameter) with PSA backing. All in Packages of 10.

Starting at: $59.00

Miscellaneous Parts & Consumables for Model L900 Grinder/Polisher

Miscellaneous Parts & Consumables for Model L900 Grinder/Polisher Note: - 8" Glass Lapping Plate - Used with plain backed lapping films - Manual Work Arm - Must be factory installed

Starting at: $36.00

Special Mold - Four Bar Cavities - Cavity size - 125mm (L) x 12mm (W) x 9mm (H)

21829 - Special Silicone Embedding Mold - Four Bar Cavities

21829, 4 cavitIes, each 125mm (L) x 12mm (W) x 9mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$36.95

Special Mold - Twelve Blocks - Cavity size: 15mm (L) x 10mm (W) x 4mm (H)

21831 - Special Silicone Embedding Mold - Twelve Blocks - Cavity size - 15mm (L) x 10mm (W) x 4mm (H)

There are 12 cavities, each 15mm (L) x 10mm (W) x 4mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$22.95

Special Mold - Twelve Blocks - Cavity size - 17mm (L) x 13mm (W) x 12mm (H)

21834 - Special Silicone Embedding Mold - Twelve Blocks - Cavity size - 17mm (L) x 13mm (W) x 12mm (H)

There are twelve cavities, each 17mm (L) x 13mm (W) x 12mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$26.95

21836 - Special Silicone Embedding Mold - Nine Tapered-end Blocks

There are 9 cavities, each 14mm (L) x 12mm (W) x 11mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$18.95

21838A - Special Silicone Embedding Mold - Six Shallow Blocks

Six shallow cavities, each 38mm (L) x 30mm (W) x 5mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$35.95

Special Mold - Twenty Tapered-end Blocks

21839 - Special Silicone Embedding Mold - Twenty Tapered-end Blocks

20 tapered-end cavities, each 18mm (L) x 6mm (W) x 3mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$24.95

SC6.6 - Hummer SC6.6 Sputter Coater

This unit consists of a Hummer 6.2 (Cat. No.: SC6.2) with a 8" cylinder (instead of a 4" cylinder), a 6" plate and a stage for large wafers or substrates. Targets must be ordered separately.

$13,890.00

Hummer 8 Sputter Coater

For manually-controlled plating and processing. Ideal for low to moderate volume sputtering applications. Integral timer terminates processes at preset durations from 0 to 15 minutes so that operator can work on other tasks. Optional quartz crystal-based digital thickness monitor for accurate readings of sample coating thickness. Please Note!! The Hummer 8 does not have an etch mode.

Options:
Wide selection of targets made from precious metals.
Carbon evaporation accessory for producing conductive coatings on samples for x-ray studies.
End point by quartz thickness monitor .
Targets must be ordered separately.

Starting at: $105.00

53159 - Silver Coated Polyester Tape

3/8" wide X 72 yards.

$51.95

3M Aluminum Tape

Available in 18 yds x 1/4" or 18 yds x 1/2".

Starting at: $26.95

Conductive Copper Tape

Single sided, single sided 3M and double-coated varieties. Available in 18 yds x 1/4" or 18 yds x 1/2".

Starting at: $23.95

60527 - Carbon Adhesive Sheets

Double-coated, 5cm x 12cm x 0.16mm thick, package of 10.

$128.95

Turbo Sputter Coater

This unit includes the following:

Hummer 8 system
Turbomolecular pump
Quartz chamber 2 rpm rotating stage (8 inch diameter)
Roughing vacuum pump with mist filter
Sample stage - for up to 200 mm substrates

Turbo Sputter Coater, DC sputter head, Chromium - This unit is identical to TSC8 except that it also contains a DC sputter head and a DC power supply expressly for chromium sputtering. Please Note!! Requires water cooling.

Turbo Sputter Coater, RF and DC Power Supplies - This unit has a combination of RF and DC power supplies. Contains a single sputter source. Second sputter source can be added for an additional charge.

Starting at: Call For Price

Gill's Hematoxylin #1 for Cytology - Progressive Type

Gill's Hematoxylin #1 for Cytology - Progressive Type:

deal for routine cytology staining. This single strength formulation optimally stains gynecological and non-gynecological specimens.

500 ml or 1000 ml

Starting at: $55.00

Carbon Adhesive Tape - Double-Coated

Available in many widths and dimensions.

Starting at: $29.95

14443 - Conductive Lift-n-Press Adhesive Tabs

Each roll (one order) contains approximately 250 tabs. Composed of a thin film of strong adhesive approximately 1/2" in diameter. Over 99% transparent to EDS. For small samples, tabs can be cut to the desired size before removing the tab from the backing sheet.

$58.95

Gill's #3, triple strength for Histology - Progressive Type

Gill's #3, triple strength for Histology - Progressive Type:

Formulation of choice for routine histological staining when a darker nuclear stain is desired.

500 ml or 1000 ml

Starting at: $35.50

Gill's Modified OG-6

Gill's Modified OG-6:

Orange 6 is one of the two cytoplasmic counterstain solutions that are used sequentially in the Papanicolaou staining method for clinical cytology. Orange-6 is stable in solution and gives predictable high quality staining results not previously possible with other formulations.

500 ml, 1000 ml, or 3.75 liters

Starting at: $18.10

Gill's Modified EA

Gill's Modified EA:

EA is one of the two cytoplasmic counterstain solutions that are used sequentially in the Papanicolaou staining method for clinical cytology. EA is stable in solution and gives predictable high quality staining results not previously possible with other formulations.

500 ml, 1000 ml, and 3.75 liters

Starting at: $21.00

My Account

All Products