Product Index - Ladd Research

UV Compatible Capsule Holders

BEEM now has available a capsule holder in a UV transparent plastic, hence it is now possible to carry out low temperature polymerizations using these UV transparent capsule holders.

Starting at: $19.95

Gelatin Capsules

An alternative to embedding with Beem Capsules. Can also be used for storing specimens.

Other sizes available upon request.

Starting at: $33.95

These unitized polyethylene molds have been used quite successfully for holding embedding medium plus specimen material during polymerization prior to ultramicrotomy. Each mold unit makes 10 numbered blocks, 8 mm in diameter, the equivalent of #00 embedding capsules. These blocks have a pyramid-shaped tip 1 mm square, which requires little or no trimming.

Starting at: $11.95

Ladd Easy Molds - Size 00

Available in two sizes: 5.6 and 8mm diameter. The 5.6mm diameter molds corresponds to BEEM capsule size 3 and the 8mm diameter molds corresponds to BEEM capsule size 00. These polyethylene molds make embedding easy and the see-through tips facilitate rapid specimen orientation. Polymerized blocks can be removed by thumb pressure. Easy Molds come as a free-standing stack of 20 embedding compartments which allows free circulation of air and gives even polymerization. For anaerobic embedding resins, the molds are self-stacking, allowing sealing from air. The used molds are convenient for storage of blocks after sectioning. Mold size is 87 x 66mm.

Starting at: $39.95

Ladd Easy Molds - Size 3

Available in two sizes: 5.6 and 8mm diameter. The 5.6mm diameter molds corresponds to BEEM capsule size 3 and the 8mm diameter molds corresponds to BEEM capsule size 00. These polyethylene molds make embedding easy and the see-through tips facilitate rapid specimen orientation. Polymerized blocks can be removed by thumb pressure. Easy Molds come as a free-standing stack of 20 embedding compartments which allows free circulation of air and gives even polymerization. For anaerobic embedding resins, the molds are self-stacking, allowing sealing from air. The used molds are convenient for storage of blocks after sectioning. Mold size is 87 x 66mm.

Starting at: $39.95

21665 - BEEM Dial-a-Grid and Block Holder Module

Stores 24 specimen grids and 2 blocks. Package of 10.

$46.95

21670 - BEEM Block Holder Module - Package of 10

For storing 10 specimen blocks. Package of 10.

$49.95

7" Abrasive Cut-Off Saw

For low cost cutting of bars, pipe, angle iron, channel tubing, flat stock, rod, etc.

Easily handles 1" solid round, 2" pipe.
Adjustable work length stop and down stop furnished.
1/2" wheel arbor
Takes 7"diameter abrasive wheel.
1 hp TEFC motor 1 ph (110, 220 volt) Please specify voltage.
Dimensions - L 22" x W 10" x H 14"
With cord and switch.
Wheel not included.
Spindle RPM - 4800.
Weight 75 lbs

Starting at: $9.00

11210 - Specimen Clamp

Low Profile, Toolmakers Specimen Clamp Made of special hardened steel and designed for utmost performance. Clamps equipped with spring screw clip. Conforms to government specifications. Particularly desirable for holding or clamping small work together when drilling, assembling, etc. Ideal for holding embedding blocks and specimens for trimming and shaping. Clamp has 1 1/4" capacity and a 2" jaw length.

$16.95

11401 - Small Tool/Tweezer Stand

This highly durable tool stand is ideal for safely holding up to 14 small tools on the workbench. A non-skid rubber strip keeps the tools' base from slipping and the notched end keeps the tools' work end elevated and free from benchtop contamination.

$94.95

21467 - Vortex Mixer

For multi-tube mixing. Can also be used for larger vessels with covered tops. Continuous or touch-on operation. Full range speed control: 100 rpm to 3000 rpm to match your contents and vessel requirements. Interchangeable mixing surfaces: single tube rubber cup or 3 1/2" diameter resilient rubber top for beakers, etc. Acid and alkali resistant white plastic cabinet. Heavy cast metal base for greater stability. Soft foam rubber feet protect work surface and prevent "walking".

$549.95

Vacuum Pick-Up

Handles delicate grids, substrates, thin sections, etc. without breaking or pinching. Performs tweezer functions such as picking up, holding and carrying. Vacuum is created at the tip by placing finger over control port located on the probe handle. To break vacuum, just remove finger from port. Adjustable vacuum generator lets user dial desired vacuum pressure and can create up to 14" Hg vacuum (air flow of 125 in3/min.) Unit is 115 VAC, 60 Hz and 2 watts. Unit comes complete with vacuum generator, anodized aluminum probe, 4 feet of tubing with in-line filter and 5 stainless steel probe tips (0.052", 0.047", 0.022", 0.016" and 0.013" ID).

Starting at: $22.95

11255 - Demagnetizer

Demagnetizes or magnetizes parts or tools. To demagnetize: simply hold object in the center of the opening with button depressed for 3 or 4 seconds. Slowly withdraw object in a straight line. Release button. To magnetize: hold the part or tool against the inside of the opening and press the button for 4 or 5 seconds and release. Opening is even large enough to accommodate cassette tapes for quick erasure. Oblong hole is 3" x 1 1/2".

$104.95

L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

Designed specifically for wedge polishing of TEM specimens. the mount consists of a small aluminum clamping mechanism and 5 Pyrex rods which slide into the center of the clamp and are held in place when the L-bracket is tightened. Not included with the purchase of the BiPod Polisher.

$195.00

32140 - Spindrive Orbital Shaker Platform

This low profile orbital shaker is magnetically driven by placing it on top of your magnetic stirrer. Speed adjustment is accomplished by setting the magnetic stirrer to the desired orbiting speed. A minimum stirrer top plate of 6" x 6" is optimum, however a 5" x 7" top will provide adequate surface area. Slower stirrers or weaker magnets under the stirrer top may limit the speed of the shaker operation. The orbital Shaker has a rotating orbit diameter of 0.856" and a weight holding capacity of 15 lbs. The top and bottom plates have non-skid pads to keep the shaker and vessels from "crawling". The top is designed to prevent any spillage from affecting the operating mechanism. The bottom plate has four pick-up indents for easy lifting.

$485.00

32142 - Spindrive Vibrating Platform

The Vibrating Platform has the same overall design as the Orbital Shaker Platform but has an orbiting diameter of 0.06", making it essentially a vibrating platform. A magnetic stirrer with a 6" x 6" top plate is optimum, but a 5" x 7" top will provide adequate surface area. It is designed to handle four microtiter plates or two large culture flasks, maximum load is 3 lbs.

$229.00

32135 - Ladd Ultrasonic Cleaner - ¾ Gallon

Ladd Ultrasonic Cleaners are designed to quickly and safely remove oil, tar, agar, food, rust, oxide, ink, blood, etc. from glassware, surgical and dental instruments, electronic components, precision parts and many other hard to clean items.

Standard Features:
     Compact One Piece Construction
     Stainless Steel Cleaning Chamber
     Simple to Operate
     Solid State Modules

$475.00

Ladd Ultrasonic Cleaner - 1 Gallon

Ladd Ultrasonic Cleaners are designed to quickly and safely remove oil, tar, agar, food, rust, oxide, ink, blood, etc. from glassware, surgical and dental instruments, electronic components, precision parts and many other hard to clean items.

Starting at: $559.95

Ladd Ultrasonic Cleaner - 2 ½ Gallon

Ladd Ultrasonic Cleaners are designed to quickly and safely remove oil, tar, agar, food, rust, oxide, ink, blood, etc. from glassware, surgical and dental instruments, electronic components, precision parts and many other hard to clean items.

Starting at: $979.95

11701 - Ultrasonic Cleaner Timer

Ultrasonic Cleaner Timer.

$49.95

Stainless Steel Cover

Stainless Steel Cover - Fits either Catalog Numbers 32135, 11700, or 12378.

Starting at: $59.95

Stainless Steel Cleaning Basket

Stainless Steel Cleaning Basket - Fits either Catalog Number 32135, 11700, or 12378.

Starting at: Call For Price

Cavitator 2.1 Quart (2 L)

Cavitator Ultrasonic Cleaners come in four sizes, designed to fit your cleaning needs. These cleaners generate ultrasonic waves that create millions of tiny bubbles through the process of cavitation. The bubbles gently clean and polish any surface they come in contact with, penetrating every nook and cranny to dislodge trapped dirt and debris. Medical instruments, glassware, even jewelry are quickly restored to their original lustrous finish without expending any effort. The gentle cleaning action is ideal for delicate items, too.

Starting at: $41.95

Cavitator 4.6 Quart (4.4 L)

Cavitator Ultrasonic Cleaners come in four sizes, designed to fit your cleaning needs. These cleaners generate ultrasonic waves that create millions of tiny bubbles through the process of cavitation. The bubbles gently clean and polish any surface they come in contact with, penetrating every nook and cranny to dislodge trapped dirt and debris. Medical instruments, glassware, even jewelry are quickly restored to their original lustrous finish without expending any effort. The gentle cleaning action is ideal for delicate items, too.

Starting at: $41.95

Cavitator 5.5 Gallon (20.8 L)

Cavitator Ultrasonic Cleaners come in four sizes, designed to fit your cleaning needs. These cleaners generate ultrasonic waves that create millions of tiny bubbles through the process of cavitation. The bubbles gently clean and polish any surface they come in contact with, penetrating every nook and cranny to dislodge trapped dirt and debris. Medical instruments, glassware, even jewelry are quickly restored to their original lustrous finish without expending any effort. The gentle cleaning action is ideal for delicate items, too.

Starting at: $24.95

Cavitator 18 Gallon (68 L)

Cavitator Ultrasonic Cleaners come in four sizes, designed to fit your cleaning needs. These cleaners generate ultrasonic waves that create millions of tiny bubbles through the process of cavitation. The bubbles gently clean and polish any surface they come in contact with, penetrating every nook and cranny to dislodge trapped dirt and debris. Medical instruments, glassware, even jewelry are quickly restored to their original lustrous finish without expending any effort. The gentle cleaning action is ideal for delicate items, too.

Starting at: $24.95

80470 - Air-Evac

Chemical storage bottle. High density polyethylene. Air-tight, light-proof. Locks out air as developer is used. 1 quart

$11.25

90906 - Dial Thermometer

Excellent for darkroom solutions. For color or B&W photography. Celsius scale reads from -20^oC to 60 ^oC in 2^o increments. Fahrenheit scale reads from 0^oF to 140^oF in 2^o increments. 3.5 cm diameter dial, 15 cm long stainless steel stem. Adjustable height clamp secures thermometer to container.

$44.95

Graduated Pitchers

Molded polypropylene, autoclavable. Chemical resistant, shatterproof. Large handle and ample pouring spout. Metric graduations in liters and milliliters. Excellent for handling/mixing large volumes of solutions.

Available in capacities of 1000, 2000, and 5000 ml.

Starting at: $10.50

21196 - General Purpose Timer

Time range: up to 60 hours (in hours and minutes).

Darkroom Timers - Portable electric timers can be used to signal the end of a pre-selected interval or to switch external circuits ON/OFF automatically. Large (8" diameter), easy-to-read dial indicates both elapsed and remaining time in pre-selected intervals. Adjustable volume buzzer alarm signals end of pre-selected interval. Two separate grounded outlet receptacles for external appliances (maximum: 750 watts per outlet). Accuracy of +/- 0.015% at maximum dial setting. Black coated steel case resists acid and alkali stains. Keyholes for wall mounting plus convenient carrying handle. 125 VAC, 60 Hz, with three-wire grounded power cord and outlet receptacles.

$251.95

My Account

All Products

UV Compatible Capsule Holders

Gelatin Capsules

Micromolds

Ladd Easy Molds - Size 00

Ladd Easy Molds - Size 3

21665 - BEEM Dial-a-Grid and Block Holder Module

21670 - BEEM Block Holder Module - Package of 10

7" Abrasive Cut-Off Saw

11210 - Specimen Clamp

11401 - Small Tool/Tweezer Stand

21467 - Vortex Mixer

Vacuum Pick-Up

11255 - Demagnetizer

L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

32140 - Spindrive Orbital Shaker Platform

32142 - Spindrive Vibrating Platform

32135 - Ladd Ultrasonic Cleaner - ¾ Gallon

Ladd Ultrasonic Cleaner - 1 Gallon

Ladd Ultrasonic Cleaner - 2 ½ Gallon

11701 - Ultrasonic Cleaner Timer

Stainless Steel Cover

Stainless Steel Cleaning Basket

Cavitator 2.1 Quart (2 L)

Cavitator 4.6 Quart (4.4 L)

Cavitator 5.5 Gallon (20.8 L)

Cavitator 18 Gallon (68 L)

80470 - Air-Evac

90906 - Dial Thermometer

Graduated Pitchers

21196 - General Purpose Timer

Our Address

Newsletter

Our Company

Customer Service