Product Index - Ladd Research

32168 - PTFE Tape

1/2" wide by 260" long. Provides excellent seal for threaded fittings.

$8.95

Excellent for post-staining sections on grids. For color reactions, staining, specimen preparation and replica washing. White, glazed porcelain, 116mm x 86mm overall size. 12 cavities, each approximately 7mm deep.

$92.50

21800 - Double End Mold

Each pre-numbered depression 14 mm long x 5 mm wide x 3 mm deep.

$20.95

Diamond Suspensions

Diamond suspensions available in 16 oz bottles

Starting at: $80.00

Hummer 6.2 Sputter Coater with 2 stage pump

The Ladd / Hummer™ 6.2 performs sputter coating, a cold process in which ions impacting a metal source dislodge metal atoms. The atoms disperse throughout the process chamber to uniformly coat irregularly shaped specimens without thermal damage. Sputter coating produces high quality coatings whose thickness is repeatable and easily controlled. Cold, fast sputter rates require less time, giving you more time for microscope examinations.

The Carbon Evaporation Accessory and the Digital Thickness Monitors must be ordered at the same time as the sputter coater and are only available for newly purchased sputter coaters.

Please Note!! The SC6.2TR comes with a 6 inch diameter chamber and with a tilting rotary stage already installed. The chamber for all other 6.2 models has a 4" diameter.

Starting at: $105.00

Standard Flat Rectangular Silicone Molds

These molds, made from a special blue-colored silicone rubber, produce flat blocks almost completely trimmed, ready for microtomy. Orientation of specimen material during embedding is easy because the block is flat, and the amount of resin used is small. When hardened, these pre-numbered blocks are easily removed from the mold by flexing it slightly. Flat blocks can be used with most ultra-microtomes. Can be baked up to a temperature of 204 degrees Celsius. Each depression: 14mm long x 5mm wide x 3mm deep.

Starting at: $24.50

SC6.2SC - Sputter Coater Small Glass Cylinder Support

offers protection for glass cylinder when taken off machine. Avoid contamination and breakage of cylinder and protect the L-gasket from damage. For 4.5" x 6" glass jars

$40.00

SC6.2MC - Sputter Coater Medium Glass Cylinder Support

Offers protection for glass cylinder when taken off machine. Avoid contamination and breakage of cylinder and protect the L-gasket from damage. For 6.6" x 8" glass jars

Call For Price

Colloidal Silica Products

Colloidal products available in 16 oz bottles

Starting at: $27.00

SKU: 21810 Round Cavity - 10mm diameter x 1.8mm deep, 12 numbered depressions

Round Cavity Silicone Molds

Come in three different diameters. These molds are made from a special blue-colored silicone rubber. When hardened, these discs are easily removed from the mold by flexing it slightly. Can be baked up to a temperature of 204 degrees Celsius.

Starting at: $18.95

SC6.2C - Sputter Coater Customized Glass Cylinder Support

Offers protection for glass cylinder when taken off machine. Avoid contamination and breakage of cylinder and protect the L-gasket from damage. Customized for any size

Call For Price

21825 - Pyramid-Tip Silicone Mold

Produces pyramid-tip blocks, which are of great assistance where orientation of specimen material is difficult. The blocks are readily attached to a standard plastic cylinder (No. 21830) with cyanoacrylate glue (SuperGlue). Makes thirty blocks 5 mm high on a 6 mm square base. Tip same as 00 BEEM capsule. Can be baked up to a temperature of 204 degrees Celsius. Package of 3 molds.

$41.95

22350 - Slide Embedding Mold

Produces three 76 mm x 25.4 mm x 2.2 mm epoxy microscope slides.

$24.95

Abrasive Suspensions

Abrasive suspensions available in 16 oz bottles

Starting at: $41.00

Chang Monolayer Embedding Mold - 11mm x 22mm cavities

Chang Monolayer Embedding Molds and Glass Coverslips

Molds and coverslips purchased separately. Can be baked up to a temperature of 204 degrees Celsius.

Starting at: Call For Price

Polishing Cloths

Polishing cloths, 8" diameter (except Polychem Cloth - 12" Diameter) with PSA backing. All in Packages of 10.

Starting at: $59.00

Miscellaneous Parts & Consumables for Model L900 Grinder/Polisher

Miscellaneous Parts & Consumables for Model L900 Grinder/Polisher Note: - 8" Glass Lapping Plate - Used with plain backed lapping films - Manual Work Arm - Must be factory installed

Starting at: $36.00

Special Mold - Four Bar Cavities - Cavity size - 125mm (L) x 12mm (W) x 9mm (H)

21829 - Special Silicone Embedding Mold - Four Bar Cavities

21829, 4 cavitIes, each 125mm (L) x 12mm (W) x 9mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$36.95

Special Mold - Twelve Blocks - Cavity size: 15mm (L) x 10mm (W) x 4mm (H)

21831 - Special Silicone Embedding Mold - Twelve Blocks - Cavity size - 15mm (L) x 10mm (W) x 4mm (H)

There are 12 cavities, each 15mm (L) x 10mm (W) x 4mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$22.95

Special Mold - Twelve Blocks - Cavity size - 17mm (L) x 13mm (W) x 12mm (H)

21834 - Special Silicone Embedding Mold - Twelve Blocks - Cavity size - 17mm (L) x 13mm (W) x 12mm (H)

There are twelve cavities, each 17mm (L) x 13mm (W) x 12mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$26.95

21836 - Special Silicone Embedding Mold - Nine Tapered-end Blocks

There are 9 cavities, each 14mm (L) x 12mm (W) x 11mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$18.95

21838A - Special Silicone Embedding Mold - Six Shallow Blocks

Six shallow cavities, each 38mm (L) x 30mm (W) x 5mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$35.95

Special Mold - Twenty Tapered-end Blocks

21839 - Special Silicone Embedding Mold - Twenty Tapered-end Blocks

20 tapered-end cavities, each 18mm (L) x 6mm (W) x 3mm (H). Can be baked up to a temperature of 204 degrees Celsius.

$24.95

SC6.6 - Hummer SC6.6 Sputter Coater

This unit consists of a Hummer 6.2 (Cat. No.: SC6.2) with a 8" cylinder (instead of a 4" cylinder), a 6" plate and a stage for large wafers or substrates. Targets must be ordered separately.

$13,890.00

Hummer 8 Sputter Coater

For manually-controlled plating and processing. Ideal for low to moderate volume sputtering applications. Integral timer terminates processes at preset durations from 0 to 15 minutes so that operator can work on other tasks. Optional quartz crystal-based digital thickness monitor for accurate readings of sample coating thickness. Please Note!! The Hummer 8 does not have an etch mode.

Options:
Wide selection of targets made from precious metals.
Carbon evaporation accessory for producing conductive coatings on samples for x-ray studies.
End point by quartz thickness monitor .
Targets must be ordered separately.

Starting at: $105.00

53159 - Silver Coated Polyester Tape

3/8" wide X 72 yards.

$51.95

3M Aluminum Tape

Available in 18 yds x 1/4" or 18 yds x 1/2".

Starting at: $26.95

Conductive Copper Tape

Single sided, single sided 3M and double-coated varieties. Available in 18 yds x 1/4" or 18 yds x 1/2".

Starting at: $23.95

60527 - Carbon Adhesive Sheets

Double-coated, 5cm x 12cm x 0.16mm thick, package of 10.

$128.95

Turbo Sputter Coater

This unit includes the following:

Hummer 8 system
Turbomolecular pump
Quartz chamber 2 rpm rotating stage (8 inch diameter)
Roughing vacuum pump with mist filter
Sample stage - for up to 200 mm substrates

Turbo Sputter Coater, DC sputter head, Chromium - This unit is identical to TSC8 except that it also contains a DC sputter head and a DC power supply expressly for chromium sputtering. Please Note!! Requires water cooling.

Turbo Sputter Coater, RF and DC Power Supplies - This unit has a combination of RF and DC power supplies. Contains a single sputter source. Second sputter source can be added for an additional charge.