Product Index - Ladd Research

Variable Voltage D.C. Power Supply

Specially designed for use with the variable speed rotary coaters Tilting Variable Speed Rotary Coater with Platform and Variable Speed Rotary Coater (Shadower) with Platform. The unit prevents excessive voltage from reaching the motor. As an additional safeguard, the unit is fused and current limited. No fragile printed circuits. Has a three-prong grounded plug. Mounted in die cast aluminum box. Operates on either 110 or 220 volts, 50/60 cycle current.

Starting at: $560.00

31073 lab companion cabinet vacuum desiccator 35 liter clear

Lab Companion Clear Cabinet Vacuum Desiccators

High-quality vacuum desiccators with long lasting vacuum integrity.

Starting at: $56.95

60406 - 4 Grid Carbon Specimen Mount

For x-ray analysis. Same as Carbon Specimen Mount (sku: 60200) except it has 4 insets on the top surface to hold carbon or beryllium TEM grids.

$3.95

60407 - Adjustable Specimen Mount

For use with metallurgical mounts or large, oddly shaped specimens between 16 mm and 25.4 mm in diameter. Three set screws in side walls of mount anchor object in place. Made of aluminum, includes hex wrench. Pin 3.2 mm.

$109.95

60298 - Clamping Specimen Mount

Two semi-circular clamping bars, each held with two screws, provide anchoring for thin specimens or fibers. Excellent holder for viewing fibers under tension. Top surface 25.4 mm diameter. Pin 3.2 mm.

$52.95

60385 - Spring Clip Specimen Mount

Two phosphor bronze clips, each 12.7 mm long, hold specimen and assure grounding while attached to 25.4 mm surface of specimen mount. Often eliminates need for conducting paint. Also available in 1 and 3 clip versions.

$52.95

12431 - JEOL TEM SCAN 100-CX Specimen Mount

Boat-shaped specimen mount made from 0.5 mm copper. 2.4 cm long x 5.6 mm wide with 4 mm high sides. Specimen framing marks in center measure 9 mm x 3 mm.

$4.55

Cambridge, B & L, CAMSCAN, ETEC, Philips, etc. - 12 Pack

Cambridge, B & L, CAMSCAN, ETEC, Philips, etc., Carbon Specimen Mount

Top surface 12.7mm diameter. Pin 3.2mm diameter.

Cambridge does not include S-4.

Starting at: $35.95

AMRAY 1000/1200/1400, Carbon Specimen Mount

Top surface 12.7 mm diameter. Pin 3.2mm diameter.

Starting at: $34.95

Cambridge S-4, Carbon Specimen Mount

Top surface 31.7 mm diameter.

Starting at: $69.95

ISI, JEOL, Carbon Specimen Mount

Dimensions are 15 mm diameter and a height of either 5 mm, 10 mm, or 15 mm.

Starting at: $22.95

JEOL, Carbon Specimen Mount

Available in either a 9.5 mm diameter and 9.5 mm height, or a 10 mm diameter and 9.5 mm height.

Starting at: $22.95

13051 - Coarse Cleaning Pads

Very aggressive. Long lasting nylon construction does the job of steel wool without the rust or metal splinters. Cleans metal fixtures, porcelain, plastic, glass. Overall size is 6" x 9" x 1/4". 10/box

$17.75

13052 - Medium Cleaning Pads

Use for finishing, blending and deburring. Long lasting nylon construction does the job of steel wool without the rust or metal splinters. Cleans metal fixtures, porcelain, plastic, glass. Overall size is 6" x 9" x 1/4". 20/box

$19.95

13054 - Fine Cleaning Pads

Very mild abrasive. Use for cleaning porcelain, stainless steel, chrome, painted surfaces and glass. Long lasting nylon construction does the job of steel wool without the rust or metal splinters. Cleans metal fixtures, porcelain, plastic, glass. Overall size is 6" x 9" x 1/4". 20/box

$18.75

P-80® Grip-It

P-80® Grip-it Quick-drying Temporary Assembly Lubricant eases installation of tight-fitting rubber and plastic parts by reducing the force needed for assembly. Once assembly is complete, P-80 Grip-it dries and provides resistance that helps keeps parts in place. P-80 Grip-it can be applied manually or automatically, by dip, brush, or spray techniques. P-80 Grip-it is ideal for insertion of hoses that are pressure-tested immediately after assembly, and in any application that requires a fast-drying lubricant. Typical uses include installation of hoses, grips, o-rings, seals, bushings, gaskets, grommets, and many other rubber and plastic parts.

Starting at: Call For Price

P-80® Emulsion IFC

P-80® Emulsion for Incidental Food Contact (IFC) is a temporary assembly lubricant that eases installation of tight-fitting rubber and plastic parts by reducing the force needed for assembly. Once assembly is complete, the lubricant dries and the part returns to its original condition. P-80 Emulsion IFC can be applied manually or automatically, by dip, brush, or spray techniques. Use P-80 Emulsion IFC in incidental food contact applications when a thin film of lubricant is desired.

P-80 Emulsion IFC Temporary Assembly Lubricant is used to install pump seals, hoses, o-rings, bushings, gaskets, grommets, grips, and many other rubber and plastic parts.

P-80 Emulsion IFC meets FDA regulation 21 CFR 178.3570 and is NSF-Registered as an H1 lubricant.

Typical viscosity of P-80 Emulsion IFC: 120 cps at 25° C.

Starting at: Call For Price

P-80® THIX IFC Lubricant Gel

Typical viscosity: 10,000 cps at 25° C.

Starting at: Call For Price

Battery Powered Engraving Tool and Stand

Engrave test tubes, bottles, racks, keys, equipment, tools, electronics and more.

Starting at: $12.95

ReadyTowel Paper Towel Dispensers

This handy product serves a single towel each time.

Starting at: $49.95

ETEC Spray Apertures

ETEC Spray Apertures - 6.35 mm x 0.14 mm

Starting at: $97.00

Spray Aperture for Cambridge Mark 3/ Zeiss Spray Apertures

New Product - Spray Aperture for Cambridge Mark 3/ Zeiss Spray Apertures

Starting at: $265.00

Self-Cleaning Apertures - Philips Type - Gold Foil - 3mm x 0.25mm

Starting at: Call For Price

LEO/Cambridge (except S180) Spray Apertures

LEO/Cambridge (except S180) Spray Apertures - 10.5 mm x 0.25 mm

Starting at: $88.95

LEO/Cambridge, Camscan, Tescan Spray Apertures

LEO/Cambridge, Camscan, Tescan Spray Aperture - 12.68 mm x 0.25 mm

Starting at: $102.95