All Products

This direct drive vacuum pump is recommended for use with our Large Desiccator (sku: 80040). Ultimate total pressure of 2 x 10-3 mbar. Free air displacement is 114 liters per minute at 60 Hz. 1/2" I.D. heavy walled tubing required.

115 VAC and 60 Hz - Free air displacement at 60 Hz is 114 liters per minute.

220 VAC and 50 Hz - Free air displacement at 50 Hz is 95 liters per minute.

Learn More

This oil mist eliminator is mounted on the outlet port of vacuum pumps 30840 and 30845. Learn More

New cartridges can be easily installed in Mist Eliminator (sku: 30850). Learn More

Good, general purpose high vacuum grade lubricant. Petrolatum hydrocarbon grease containing no additives. Vapor pressure of 8 x 10-11 torr at 20o C. May be used on all ground joints in vacuum systems except where joint temperatures exceed 30o C. Sold in 25 g tube. Learn More

General purpose lubricant similar to Apiezon L but containing more wax. Vapor pressure of 2 x 10-9 torr at 20o C. Recommended for use in vacuum work and as a good, general lubricant throughout the laboratory. Not intended for use with joints above 30o C. Sold in 25 g tube. Learn More

Silicone lubricant which maintains its consistency from -40 to +230o C. Chemical resistant and vapor pressure at 10-8 torr. Tube size is 5.3 oz. Learn More

Generic equivalent of Torr Seal. Seals leaks with no solvent evaporation. Applications to thermistors and all varieties of vacuum systems. Consists of 1.2 ounces of hardener and 2.8 ounces of resin. Learn More

TorrLube is a lubricant specifically formulated to work under extreme pressure and temperatures in high vacuum applications. When applied sparingly to O-rings and feed-throughs, TorrLube's excellent lubricating qualities dramatically extend the integrity of vacuum to atmosphere seals, thereby improving vacuum system performance over longer time periods.

Learn More

One quart replacement fluid for Ladd Chiller. Very low viscosity. Chemically equivalent to Dow-Corning 200 Fluid, 10 centistokes Learn More