This is a basic laboratory microwave for staining microscope tissue samples, waste solids testing, moisture testing, chemical processing, agar heating and other laboratory processing.
- Operates just as a domestic microwave oven using time and power level
- 120 volt operation – needs no special wiring (230 VAC 50 Hz input available
- Up to 1,000 watts of microwave power. High volume cooling for long life
- 5 different power levels plus a hold feature
- Simple to use touch control pad
- Up to twenty multistage programs can be stored for your most popular protocols
- Powered cavity exhaust to remove fumes from the cavity
- Mode stirrer gives excellent uniform heating without the need of a breakable turntable common to domestic microwaves
- Includes 8 feet of chemical resistant flexible duct to facilitate connection of exhaust system
- Includes 2 stainless steel clamps for ease of mounting the exhaust duct
- Includes adaptor to connect exhaust hose to the microwave
- Cavity is 330mm wide x 205mm tall x 330mm deep (13" x 8 1/16" x 13")
- Compact microwave. Uses minimal counter space.
- Stainless steel cavity and cover for easy clean up, chemical resistance and long life.
- Fully safety tested including for microwave leakage
- Meets US FCC requirements and can be tested for Canadian CSA requirements.
Options:
- Vacuum/gas inlet
- Extended Life Program Learn More
Staining kit contains one of each color jar plus one staining rack for 12 slides. Jars are
2 1/2" wide x 3" deep x 3 5/8" high.
Innovative, user-friendly manual staining system. Acetal polymer jars will not break like glass jars. Wide stable base assures jar stability while recessed inside allows use of just 80ml of reagent for 12 slides. Ideal for special stains, frozen sections and special processes. Resistant to most chemicals and dyes including alcohol and xylene, but not phenol. Temperature resistant between -170°C and 121°C. Microwave safe for slide staining and drying. Learn More
Ideal for use as a support when installing and uninstalling the diffusion pump on the Ladd Vacuum Evaporator. Also used to sustain hot plates, flasks, beakers, baths, and other lab items. The top and bottom plates can be fixed to lab equipment or a bench by drilling and attaching with appropriate fasteners. Top plate is 21cm (8.25") diameter and accepts a vertical support rod available as an accessory, (Catalog # F18391-0002). Steam autoclavable at 121°C (250°F). Note: Do not use the lab jack to lift weight, instead, place weight on the top plate after adjusting it to the required position. Polycarbonate lab jack holds up to 6.8kg (15lb)
• Chemical and corrosion resistant with no metal parts
• Does not conduct electricity
• Can be used a bath or environments that corrode other metal lab jacks
• Precise height positioning from 76mm to 30cm (3" to 12") Learn More
Diameter: 7.9mm (5/16") accepts various clamps and other accessories. Includes two hex nuts for secure attachment to the jack top plate.
Stainless steel support rod, 46cm (18") long, attaches to Poly-Jaque™ Lab Jack to accept clamps, rings, etc Learn More
This oven is primarily for the life science processes of cell staining, immunochemistry, antigen retrieval or other post cell preparation processes. This microwave can also be used for general laboratory work where temperature control is needed. This is not intended for samples that are dry or for small volumes of reagents.
Dimesions:
- Outer: 20.125" long x 15" high x 12" deep nominal (W/O handle)
- Weight: 50 pounds Learn More
Fits most standard monocular microscopes. Designed to accept 16 mm diameter reticle. Permits reticle image to be brought into sharp focus when super-imposed on the specimen image. The reticle is held in position by a screw on retaining ring. Easy to remove for cleaning or replacement. Magnification of 7X; Huygenian Design. Black anodized finish.
The LBP-211 and its lower power twin, the LBP-210, have the largest cavity in the industry. It is right at home in the laboratory, on the production line or heating material for a variety of applications.
Specifications:
- Output power: 2,000 watts for LBP-210, 3,200 watts for LBP-211
- Required power: 208/230 volt, 1 phase, 60 Hz. (50 Hz available)
- Requires dedicated 20 amp line. 30 amp NEMA 6-3DR male plug supplied
Dimensions:
- Outer: 25.56" d x 20.75" h x 18.56" w nominal (W/O handle)
- Cavity: 21.06" d x 13" h x 9.875" w nominal
- Weight: 128 pounds
- Operating frequency: 2.45 GHz (an internationally regulated ISM frequency) Learn More
