Call to Order : (800) 451-3406

My Account

Welcome to Ladd!

  • Home /
  • Product Index

All Products

Filter Products by Letter

Items 781 to 810 of 1318 total

Page:
  1. 25
  2. 26
  3. 27
  4. 28
  5. 29
per page

Grid List

Set Descending Direction
81024 - Mini Magnifier

81024 - Mini Magnifier

This free-standing magnifier allows enhanced viewing of Petri dishes, multi-well plates, x-ray films, stained gels, slides or text. The precision molded lens offers 1.75 x magnification. The unique stand allows the magnifier to be placed over a variety of objects, including the Mini Light Box (sku: 81016).
$235.95
/

81025 - High Intensity Magnifying Lamp

5 inch diameter ophthalmic magnifying lens provides a large viewing area with no distortion. Improves visual acuity with its 2X magnification and direct light source. Leaves both hands free for working or handling small tools.
$126.95
/

80623 - Viewing Box - 24" x 36" - NLA

Viewing Box - 24" x 36" overall size. Contains five 18 watt bulbs.
Call For Price
/

80624 - Viewing Box - 36" x 48" - NLA

Viewing Box - 36" x 48" overall size. Contains five 18 watt bulbs.
Call For Price
Viewing Box - 11" x 18" - NLA

Viewing Box - 11" x 18" - NLA

Viewing Box - 11" x 18" overall size.

Starting at: Call For Price

/

Viewing Box - 16" x 18" - NLA

Viewing Box - 16" x 18" overall size.

Starting at: Call For Price

21680 - Ladd Capsule Holder and Finger Protector

21680 - Ladd Capsule Holder and Finger Protector

A molded silicone rubber grip to hold embedding capsules steady and protect fingers while slitting capsules to remove resin block. Package of 5.
$26.95
Beem Capsules

Beem Capsules

These pre-shaped polyethylene capsules were developed to replace the conventional round-bottomed gelatin capsules with all their attendant problems.

Important advantages are:

1. They produce preformed blocks.

2. Orientation of specimen is facilitated.

3. The plastic does not adhere to the polymerized block, which is readily removed.

4. There is no need to pre-dry these capsules to eliminate moisture, as was too often necessary with gelatin capsules.

 

Size 00 - 8 mm diameter x 20 mm high

Size 3 - 5.6 mm diameter x 14 mm high

Starting at: $10.95

Conical Tip Embedding Capsule

Conical Tip Embedding Capsules

Used seccessfully for embedding very small or thin, elongated pieces of tissue. The shape of these capsules requires that care be exercised when filling them so there will be no air entrapped in the tips. Suitable for centrifugal packing of whole cells. Makes a block that is 7.9 mm OD x 18 mm high.

Starting at: $13.95

Cylindrical Tip Embedding Capsule

Cylindrical Tip Embedding Capsules

These capsules have proved of great use to the virologist for encapsulation of virus samples. They have also proved helpful to those microscopists who must examine cross-sections of thin elongated sections of tissue. Care must be exercised when filling these capsules to prevent entrapment of air in the tips. Suitable for centrifugal packing of whole cells. Makes a block that is 8 mm ID x 18 mm high.

Starting at: $13.95

Ultrajet Duster

Ultrajet Duster

Ultrajet® compressed gas duster is a high pressure duster that cleans electronics without scratching delicate surfaces. This duster/cleaner is nonflammable, residue-free and won't scratch delicate surfaces.

Starting at: $39.95

Cavi-Clean

11715 - Cavi-Clean Liquid Detergent

Cavi-clean Liquid Detergent - An all-purpose detergent formulated to increase efficiency of ultrasonic units. Gentle to the hands. Neutral pH. Will not harm metals or their alloys. Has blood cutting agents and a rust inhibitor. Includes an excellent wetting and penetrating agent among it's features.

1 gallon container (concentrate, 1 oz per gallon of water)

$118.95
Cavi-Clean Additive

32110 - Cavi-Clean Additive

Highly soluble powder designed exclusively for use in ultrasonic cleaners to greatly increase the cleaning action of Cavi-Clean Liquid Detergent (sku: 11715). Super-strong, even removes metal oxides. Recommended use is within a glass beaker. Due to it's potency, Cavi-Clean Additive should not be used with other detergents and should be used only in ultrasonic cleaners. Avoid using where more than one type of metal is present.

1 pound package.

$30.95
Beem Individual Block Holder

Beem Individual Block Holder

Stores 10 blocks, size 00 (cut or uncut) in indexed compartments. Tight plastic lid keeps blocks in place.

Dimensions (outside): 2½ x 1¾ x ½ "

Starting at: $59.95

UV Compatible Capsule Holders

UV Compatible Capsule Holders

BEEM now has available a capsule holder in a UV transparent plastic, hence it is now possible to carry out low temperature polymerizations using these UV transparent capsule holders.

Starting at: $19.95

Gelatin Capsules

Gelatin Capsules

An alternative to embedding with Beem Capsules. Can also be used for storing specimens.

Other sizes available upon request.

Starting at: $33.95

Micromold

Micromolds

These unitized polyethylene molds have been used quite successfully for holding embedding medium plus specimen material during polymerization prior to ultramicrotomy. Each mold unit makes 10 numbered blocks, 8 mm in diameter, the equivalent of #00 embedding capsules. These blocks have a pyramid-shaped tip 1 mm square, which requires little or no trimming.

Starting at: $11.95

Ladd Easy Molds - Size 00

Ladd Easy Molds - Size 00

Available in two sizes: 5.6 and 8mm diameter. The 5.6mm diameter molds corresponds to BEEM capsule size 3 and the 8mm diameter molds corresponds to BEEM capsule size 00. These polyethylene molds make embedding easy and the see-through tips facilitate rapid specimen orientation. Polymerized blocks can be removed by thumb pressure. Easy Molds come as a free-standing stack of 20 embedding compartments which allows free circulation of air and gives even polymerization. For anaerobic embedding resins, the molds are self-stacking, allowing sealing from air. The used molds are convenient for storage of blocks after sectioning. Mold size is 87 x 66mm.

Starting at: $39.95

Ladd Easy Molds - Size 3

Ladd Easy Molds - Size 3

Available in two sizes: 5.6 and 8mm diameter. The 5.6mm diameter molds corresponds to BEEM capsule size 3 and the 8mm diameter molds corresponds to BEEM capsule size 00. These polyethylene molds make embedding easy and the see-through tips facilitate rapid specimen orientation. Polymerized blocks can be removed by thumb pressure. Easy Molds come as a free-standing stack of 20 embedding compartments which allows free circulation of air and gives even polymerization. For anaerobic embedding resins, the molds are self-stacking, allowing sealing from air. The used molds are convenient for storage of blocks after sectioning. Mold size is 87 x 66mm.

Starting at: $39.95

BEEM Dial-a-Grid and Block Holder Module

21665 - BEEM Dial-a-Grid and Block Holder Module

Stores 24 specimen grids and 2 blocks. Package of 10.
$46.95
BEEM Block Holder Module

21670 - BEEM Block Holder Module - Package of 10

For storing 10 specimen blocks. Package of 10.
$49.95
7" Abrasive Cut-Off Saw

7" Abrasive Cut-Off Saw

For low cost cutting of bars, pipe, angle iron, channel tubing, flat stock, rod, etc.

  • Easily handles 1" solid round, 2" pipe.
  • Adjustable work length stop and down stop furnished.
  • 1/2" wheel arbor
  • Takes 7"diameter abrasive wheel.
  • 1 hp TEFC motor 1 ph (110, 220 volt) Please specify voltage.
  • Dimensions - L 22" x W 10" x H 14"
  • With cord and switch.
  • Wheel not included.
  • Spindle RPM - 4800.
  • Weight 75 lbs

Starting at: $9.00

Specimen Clamp

11210 - Specimen Clamp

Low Profile, Toolmakers Specimen Clamp Made of special hardened steel and designed for utmost performance. Clamps equipped with spring screw clip. Conforms to government specifications. Particularly desirable for holding or clamping small work together when drilling, assembling, etc. Ideal for holding embedding blocks and specimens for trimming and shaping. Clamp has 1 1/4" capacity and a 2" jaw length.
$16.95
11401 - Small Tool/Tweezer Stand

11401 - Small Tool/Tweezer Stand

This highly durable tool stand is ideal for safely holding up to 14 small tools on the workbench. A non-skid rubber strip keeps the tools' base from slipping and the notched end keeps the tools' work end elevated and free from benchtop contamination.
$94.95
21467 - Vortex Mixer

21467 - Vortex Mixer

For multi-tube mixing. Can also be used for larger vessels with covered tops. Continuous or touch-on operation. Full range speed control: 100 rpm to 3000 rpm to match your contents and vessel requirements. Interchangeable mixing surfaces: single tube rubber cup or 3 1/2" diameter resilient rubber top for beakers, etc. Acid and alkali resistant white plastic cabinet. Heavy cast metal base for greater stability. Soft foam rubber feet protect work surface and prevent "walking".
$549.95
Vacuum Pick-Up

Vacuum Pick-Up

Handles delicate grids, substrates, thin sections, etc. without breaking or pinching. Performs tweezer functions such as picking up, holding and carrying. Vacuum is created at the tip by placing finger over control port located on the probe handle. To break vacuum, just remove finger from port. Adjustable vacuum generator lets user dial desired vacuum pressure and can create up to 14" Hg vacuum (air flow of 125 in3/min.) Unit is 115 VAC, 60 Hz and 2 watts. Unit comes complete with vacuum generator, anodized aluminum probe, 4 feet of tubing with in-line filter and 5 stainless steel probe tips (0.052", 0.047", 0.022", 0.016" and 0.013" ID).

Starting at: $22.95

11255 - Demagnetizer

11255 - Demagnetizer

Demagnetizes or magnetizes parts or tools. To demagnetize: simply hold object in the center of the opening with button depressed for 3 or 4 seconds. Slowly withdraw object in a straight line. Release button. To magnetize: hold the part or tool against the inside of the opening and press the button for 4 or 5 seconds and release. Opening is even large enough to accommodate cassette tapes for quick erasure. Oblong hole is 3" x 1 1/2".
$104.95
L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

Designed specifically for wedge polishing of TEM specimens. the mount consists of a small aluminum clamping mechanism and 5 Pyrex rods which slide into the center of the clamp and are held in place when the L-bracket is tightened. Not included with the purchase of the BiPod Polisher.
$195.00
32140 - Spindrive Orbital Shaker Platform

32140 - Spindrive Orbital Shaker Platform

This low profile orbital shaker is magnetically driven by placing it on top of your magnetic stirrer. Speed adjustment is accomplished by setting the magnetic stirrer to the desired orbiting speed. A minimum stirrer top plate of 6" x 6" is optimum, however a 5" x 7" top will provide adequate surface area. Slower stirrers or weaker magnets under the stirrer top may limit the speed of the shaker operation. The orbital Shaker has a rotating orbit diameter of 0.856" and a weight holding capacity of 15 lbs. The top and bottom plates have non-skid pads to keep the shaker and vessels from "crawling". The top is designed to prevent any spillage from affecting the operating mechanism. The bottom plate has four pick-up indents for easy lifting.
$485.00
32142 - Spindrive Vibrating Platform

32142 - Spindrive Vibrating Platform

The Vibrating Platform has the same overall design as the Orbital Shaker Platform but has an orbiting diameter of 0.06", making it essentially a vibrating platform. A magnetic stirrer with a 6" x 6" top plate is optimum, but a 5" x 7" top will provide adequate surface area. It is designed to handle four microtiter plates or two large culture flasks, maximum load is 3 lbs.
$229.00

Items 781 to 810 of 1318 total

Page:
  1. 25
  2. 26
  3. 27
  4. 28
  5. 29
per page

Grid List

Set Descending Direction

Categories

 

Our Address

Ladd Research, 3 Ewing Place, Essex Junction, VT 05452

(800) 451-3406 (USA)
(802) 658-4961



Newsletter

Our Company


Customer Service