If your instrument can resolve the tetrad of this protein molecule it has better than 12.5 Angstroms resolution. Supplied as a pure suspension dispersed upon a formvar substrate.
A high resolution test specimen consisting of a graphitized ISAF carbon black dispersed on "lacey" carbon film supported by a 200 mesh grid. The carbon black chains bridge openings in the film so there is no substrate to interfere with resolution tests. Imaging of the 3.4 Angstrom lattice spacing of the carbon, along with the curved regions and dislocations, permit magnification calibration and check the performance of high resolution electron microscopes.
- Compact. Cavity is 13" Long x 13" Deep x 8 1/16" High
- Outer dimensions: 20 1/8" Long x 15" Deep x 12" High
- Stainless steel cavity and wrapper
- Variable power. Levels from 25 to 825 watts
- Microwaves turn on instantly. No 2-3 second delay.
- Can be operated in manual or automatic mode
- Removable thermal probe for easy field replacement
- Variety of thermal probes available
- Cavity air removed through chemically resistant duct.
- Fresh air pulled into cavity via fan
- Microwave compatible feedthrough for 1/4" ID tubing
Microwaves come with 8 feet of chemical resistant exhaust duct, 2 clamps for the exhaust duct, CAP baseline test for microwave and temperature reproducibility and tips on microwave usage.
The LBP111RS is essentially the same microwave as the
LBP111 except with different controls.
- Compact. Cavity is 13" Long x 13" Deep x 8 1/16" High
- Outer dimensions: 20 1/8" Long x 15" Deep x 12" High
- Stainless steel cavity and wrapper
- Variable power. Levels from 25 to 825 watts
- Microwaves turn on instantly. No 2-3 second delay.
- Can be operated in manual or automatic mode
- Removable thermal probe for easy field replacement
- Variety of thermal probes available
- Cavity air removed through chemically resistant duct.
- Fresh air pulled into cavity via fan
- Microwave compatible feedthrough for 1/4" ID tubing
Microwaves come with 8 feet of chemical resistant exhaust duct, 2 clamps for the exhaust duct, CAP baseline test for microwave and temperature reproducibility, discount for next years CAP microwave test kit and tips on microwave usage.
Available in many dimensions, package sizes and compartment configurations. Molded of transparent styrene with hinged covers. Excellent for storage of small parts, tools, instruments, etc.
Available in many dimensions and package sizes. Molded of transparent styrene with hinged covers. Excellent for storage of small parts, tools, instruments, etc.
Available in many dimensions and package sizes. Molded of transparent styrene with Friction Fit Top. Excellent for storage of small parts, tools, instruments, etc.
Precision cutting of carbon rods by these sharpeners eliminates all difficulties of producing excellent carbon rod points for evaporation.
Details to carbon rod diameter and VAC included below.
For use with Carbon Rod Sharpener to drill 3/64" deep holes in the ends of carbon rod segments to hold one end of a platinum-carbon pellet during evaporation.
This is a basic laboratory microwave for staining microscope tissue samples, waste solids testing, moisture testing, chemical processing, agar heating and other laboratory processing.
- Operates just as a domestic microwave oven using time and power level
- 120 volt operation – needs no special wiring (230 VAC 50 Hz input available
- Up to 1,000 watts of microwave power. High volume cooling for long life
- 5 different power levels plus a hold feature
- Simple to use touch control pad
- Up to twenty multistage programs can be stored for your most popular protocols
- Powered cavity exhaust to remove fumes from the cavity
- Mode stirrer gives excellent uniform heating without the need of a breakable turntable common to domestic microwaves
- Includes 8 feet of chemical resistant flexible duct to facilitate connection of exhaust system
- Includes 2 stainless steel clamps for ease of mounting the exhaust duct
- Includes adaptor to connect exhaust hose to the microwave
- Cavity is 330mm wide x 205mm tall x 330mm deep (13" x 8 1/16" x 13")
- Compact microwave. Uses minimal counter space.
- Stainless steel cavity and cover for easy clean up, chemical resistance and long life.
- Fully safety tested including for microwave leakage
- Meets US FCC requirements and can be tested for Canadian CSA requirements.
Options:
- Vacuum/gas inlet
- Extended Life Program
Staining kit contains one of each color jar plus one staining rack for 12 slides. Jars are
2 1/2" wide x 3" deep x 3 5/8" high.
Innovative, user-friendly manual staining system. Acetal polymer jars will not break like glass jars. Wide stable base assures jar stability while recessed inside allows use of just 80ml of reagent for 12 slides. Ideal for special stains, frozen sections and special processes. Resistant to most chemicals and dyes including alcohol and xylene, but not phenol. Temperature resistant between -170°C and 121°C. Microwave safe for slide staining and drying.
Ideal for use as a support when installing and uninstalling the diffusion pump on the Ladd Vacuum Evaporator. Also used to sustain hot plates, flasks, beakers, baths, and other lab items. The top and bottom plates can be fixed to lab equipment or a bench by drilling and attaching with appropriate fasteners. Top plate is 21cm (8.25") diameter and accepts a vertical support rod available as an accessory, (Catalog # F18391-0002). Steam autoclavable at 121°C (250°F). Note: Do not use the lab jack to lift weight, instead, place weight on the top plate after adjusting it to the required position. Polycarbonate lab jack holds up to 6.8kg (15lb)
• Chemical and corrosion resistant with no metal parts
• Does not conduct electricity
• Can be used a bath or environments that corrode other metal lab jacks
• Precise height positioning from 76mm to 30cm (3" to 12")
Diameter: 7.9mm (5/16") accepts various clamps and other accessories. Includes two hex nuts for secure attachment to the jack top plate.
Stainless steel support rod, 46cm (18") long, attaches to Poly-Jaque™ Lab Jack to accept clamps, rings, etc
This oven is primarily for the life science processes of cell staining, immunochemistry, antigen retrieval or other post cell preparation processes. This microwave can also be used for general laboratory work where temperature control is needed. This is not intended for samples that are dry or for small volumes of reagents.
Dimesions:
- Outer: 20.125" long x 15" high x 12" deep nominal (W/O handle)
- Weight: 50 pounds
Fits most standard monocular microscopes. Designed to accept 16 mm diameter reticle. Permits reticle image to be brought into sharp focus when super-imposed on the specimen image. The reticle is held in position by a screw on retaining ring. Easy to remove for cleaning or replacement. Magnification of 7X; Huygenian Design. Black anodized finish.
