Product Index - Ladd Research

P-80® Grip-It

P-80® Grip-it Quick-drying Temporary Assembly Lubricant eases installation of tight-fitting rubber and plastic parts by reducing the force needed for assembly. Once assembly is complete, P-80 Grip-it dries and provides resistance that helps keeps parts in place. P-80 Grip-it can be applied manually or automatically, by dip, brush, or spray techniques. P-80 Grip-it is ideal for insertion of hoses that are pressure-tested immediately after assembly, and in any application that requires a fast-drying lubricant. Typical uses include installation of hoses, grips, o-rings, seals, bushings, gaskets, grommets, and many other rubber and plastic parts.

Starting at: Call For Price

P-80® Emulsion IFC

P-80® Emulsion for Incidental Food Contact (IFC) is a temporary assembly lubricant that eases installation of tight-fitting rubber and plastic parts by reducing the force needed for assembly. Once assembly is complete, the lubricant dries and the part returns to its original condition. P-80 Emulsion IFC can be applied manually or automatically, by dip, brush, or spray techniques. Use P-80 Emulsion IFC in incidental food contact applications when a thin film of lubricant is desired.

P-80 Emulsion IFC Temporary Assembly Lubricant is used to install pump seals, hoses, o-rings, bushings, gaskets, grommets, grips, and many other rubber and plastic parts.

P-80 Emulsion IFC meets FDA regulation 21 CFR 178.3570 and is NSF-Registered as an H1 lubricant.

Typical viscosity of P-80 Emulsion IFC: 120 cps at 25° C.

Starting at: Call For Price

P-80® THIX IFC Lubricant Gel

Typical viscosity: 10,000 cps at 25° C.

Starting at: Call For Price

Battery Powered Engraving Tool and Stand

Engrave test tubes, bottles, racks, keys, equipment, tools, electronics and more.

Starting at: $12.95

ReadyTowel Paper Towel Dispensers

This handy product serves a single towel each time.

Starting at: $49.95

Secador 2.0 Auto-Desiccator Cabinet

The superior dehumidification performance of the auto-desiccator model makes it a natural choice for more perishable and expensive chemicals that require constant low humidity. Totally automatic, continual desiccation with silica beads, and regeneration every 20 minutes, keeps the RH in the desiccator at a constant low level. No long regeneration lag between cycles - minimal RH change from opening the door. Two fans guarantee continuous air flow either within the cabinet, or continuous exhaust of humid air.

Starting at: $910.95

Secador 2.0 Desiccator Cabinet

Non electric
Built-in hygrometer, 2 shelves 2 shelf positions, internal volume: 1.17 cu. ft.
2 latches. Provision for lock or tamper evident seal
Door opening: 8.25"H x 8.9"W
Overall dimensions: 12.4"H x 13.4"W x 16.3"D

Starting at: $559.95

Variable Voltage D.C. Power Supply

Specially designed for use with the variable speed rotary coaters Tilting Variable Speed Rotary Coater with Platform and Variable Speed Rotary Coater (Shadower) with Platform. The unit prevents excessive voltage from reaching the motor. As an additional safeguard, the unit is fused and current limited. No fragile printed circuits. Has a three-prong grounded plug. Mounted in die cast aluminum box. Operates on either 110 or 220 volts, 50/60 cycle current.

Starting at: $560.00

31073 lab companion cabinet vacuum desiccator 35 liter clear

Lab Companion Clear Cabinet Vacuum Desiccators

High-quality vacuum desiccators with long lasting vacuum integrity.

Starting at: $56.95

sub1micron - Sub 1 Micron Apertures

We are pleased to introduce a new line of sub micron apertures. Manufacture of apertures less than 1 micron in diameter is made possible by the development of composite apertures consisting of a molybdenum (Mo) support with a thin sheet of platinum (Pt) foil fused to the surface. The sturdy Mo support contains a visible counterbore to simplify locating the very small aperture hole.

Please call us for details.

Call For Price

Coming Soon!! Graphene TEM Support Films - GSF

Continuous graphene support film.

Call For Price