All Products

• Small footprint with 13% more interior volume than typical desiccator domes
• Glass transparent, shatter resistant polycarbonate upper section offers unobstructed viewing of contents
• Polypropylene lower section has excellent chemical resistance and can be used with incandescent crucibles supported on porcelain plate
• Polypropylene stopcock with a Teflon® PTFE plug controls airflow to gently release vacuum
• Stores full vacuum 29.9" Hg (759mm) at room temperature for 24 hours without need for vacuum grease
• Classic Dome Design Desiccators with and without Vacuum Ports

These desiccator plates are able to withstand temperatures up to 150^o C, have excellent resistance to thermal shock, are non-combustible, asbestos free, stable and chemical resistant. The circular plates are perforated with 6mm diameter holes on 25mm centers in a straight line pattern. They are available in 3 diameters which fit catalog numbers 80929A, 80929 and 80929C in addition to other plastic desiccators of similar size.

All are 4.8mm thick.

Smooth action bearings facilitate easy turning Perfect for use in desiccators and cabinets as well as on a table or shelf . Works best in Secador 1.0 and above.

Dimensions: 23 x 1.5cm (9.0 x 0.6")

One of a series of resin-bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. Molydag 254N is a synergistic conbination of MoS₂ and other lubricants dispersed in an epoxy resin solution. It can be applied by standard brush, dip-spin or spray techniques. Molydag 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. Molydag 254N provides an effective performance, even as a very thin film (0.0003" or 8 microns), thus there is little interference with operating tolerances.

New Name: Bonderite S-FN M 254N Acheson

This desiccator cabinet is ideal for creating a carbon dioxide atmosphere for tissue culture processing or flushing with nitrogen to create an anaerobic environment. Two gas ports allow the cabinet atmosphere to be rapidly and effectively flushed. The gas port stopcocks are 4mm diameter and accept 6mm (1/4") tubing. The doors seals against a gasket and closes with two roller latches. 8 7/8" L x 7 7/8" D x 6 5/8" H

Clear polystyrene cabinet

The door seals against a foam rubber gasket and is held closed with two roller latches. The open door glides underneath the cabinet to maintain the cabinet's small footprint. Dimensions: 8 1/4" x 7" x 5". Door opening 7 1/2" x 4 3/8". A jar of silica gel desiccant is included. Ideal for use with Scienceware® desiccant cartridges or canisters. Translucent polystyrene cabinets allow viewing of contents from any angle. 

• Can stack up to five cabinets to save bench space

The door is sealed closed with a roll latch. When the downward pivoting door is opened, it stores in a space underneath the cabinet. The door opening is 23 x 20cm (9 x 8"); inside depth is 23cm (9"). A small tray that fits under the bottom shelf holds the desiccant. Transparent polystyrene cabinet with smoke tinting to help protect light sensitive contents.

    • Up to five units can be stacked to reduce crowding
       on the bench top
    • Two perforated shelves can be adjusted to four 
       different locations
    • Non-electric, non-vacuum