All Products

Good, general purpose high vacuum grade lubricant. Petrolatum hydrocarbon grease containing no additives. Vapor pressure of 8 x 10-11 torr at 20o C. May be used on all ground joints in vacuum systems except where joint temperatures exceed 30o C. Sold in 25 g tube. Learn More

General purpose lubricant similar to Apiezon L but containing more wax. Vapor pressure of 2 x 10-9 torr at 20o C. Recommended for use in vacuum work and as a good, general lubricant throughout the laboratory. Not intended for use with joints above 30o C. Sold in 25 g tube. Learn More

Silicone lubricant which maintains its consistency from -40 to +230o C. Chemical resistant and vapor pressure at 10-8 torr. Tube size is 5.3 oz. Learn More

Generic equivalent of Torr Seal. Seals leaks with no solvent evaporation. Applications to thermistors and all varieties of vacuum systems. Consists of 1.2 ounces of hardener and 2.8 ounces of resin. Learn More

TorrLube is a lubricant specifically formulated to work under extreme pressure and temperatures in high vacuum applications. When applied sparingly to O-rings and feed-throughs, TorrLube's excellent lubricating qualities dramatically extend the integrity of vacuum to atmosphere seals, thereby improving vacuum system performance over longer time periods.

Learn More

One quart replacement fluid for Ladd Chiller. Very low viscosity. Chemically equivalent to Dow-Corning 200 Fluid, 10 centistokes Learn More

Specially recommended for high vacuum work. Extra heavy 3/8" thick wall of high quality natural rubber (red). 3/4" I.D. and 1 1/2" O.D. Learn More

Glisseal is suitable for sealing and lubricating fixed and rotary ground glass joints and for greasing fittings made of plastics and metal. Learn More

Features

- Single cabinet with all assemblies within the cabinetry

- Carbon evaporation with pre-sharpened rods for repeatable operating parameters, less labor to prepare

- Uses 1/4" carbon rods

- Safety interlock for vacuum and high voltage

- Automatic vent at machine off selection

- Complete package ready for coating, includes rods, pump and oil and manual

- Integral dual stage direct drive rotary vane 1 cfm vacuum pump

- Manually controlled operation

- 100 Volt, 10 Ampere power supply

- Stage diameter accommodates up to 12 SEM pin stubs

- Stage diameter accommodates up to 75 mm diameter substrates

- Chamber is annealed, ends are grounded, polished and re-annealed

- System is 535 mm x 330 mm x 320 mm

- Digital display of vacuum

- Analog display of current

Learn More