All Products

Filter Products by Letter

Items 571 to 600 of 1327 total

Page:
  1. 18
  2. 19
  3. 20
  4. 21
  5. 22
per page

Grid List

Set Descending Direction
3M Aluminum Tape

3M Aluminum Tape

Available in 18 yds x 1/4" or 18 yds x 1/2".

Starting at: $26.95

Conductive Copper Tape

Conductive Copper Tape

Single sided, single sided 3M and double-coated varieties. Available in 18 yds x 1/4" or 18 yds x 1/2".

Starting at: $23.95

60527 - Carbon Adhesive Sheets

60527 - Carbon Adhesive Sheets

Double-coated, 5cm x 12cm x 0.16mm thick, package of 10.
$128.95
Turbo Sputter Coater

Turbo Sputter Coater

This unit includes the following:

  • Hummer 8 system
  • Turbomolecular pump
  • Quartz chamber 2 rpm rotating stage (8 inch diameter)
  • Roughing vacuum pump with mist filter
  • Sample stage - for up to 200 mm substrates

 

Turbo Sputter Coater, DC sputter head, Chromium - This unit is identical to TSC8 except that it also contains a DC sputter head and a DC power supply expressly for chromium sputtering. Please Note!! Requires water cooling.

 

Turbo Sputter Coater, RF and DC Power Supplies - This unit has a combination of RF and DC power supplies. Contains a single sputter source. Second sputter source can be added for an additional charge.

Starting at: Call For Price

Gill's Hematoxylin #1 for Cytology - Progressive Type

Gill's Hematoxylin #1 for Cytology - Progressive Type

Gill's Hematoxylin #1 for Cytology - Progressive Type:

deal for routine cytology staining. This single strength formulation optimally stains gynecological and non-gynecological specimens.

500 ml or 1000 ml

Starting at: $55.00

Carbon Adhesive Tape

Carbon Adhesive Tape - Double-Coated

Available in many widths and dimensions.

Starting at: $29.95

Conductive Lift-n-Press Adhesive Tabs

14443 - Conductive Lift-n-Press Adhesive Tabs

Each roll (one order) contains approximately 250 tabs. Composed of a thin film of strong adhesive approximately 1/2" in diameter. Over 99% transparent to EDS. For small samples, tabs can be cut to the desired size before removing the tab from the backing sheet.
$58.95
Nonconductive Lift-n-Press Adhesive Tabs

14445 - Adhesive Tabs

Package of 72 sheets of 36 tabs each. Tabs measure 12 mm in diameter. Use for adhering specimen to mount. Non-conducting.
$37.95
Gill's #3, triple strength for Histology - Progressive Type

Gill's #3, triple strength for Histology - Progressive Type

Gill's #3, triple strength for Histology - Progressive Type:

Formulation of choice for routine histological staining when a darker nuclear stain is desired.

500 ml or 1000 ml

Starting at: $35.50

Gill's Modified OG-6

Gill's Modified OG-6

Gill's Modified OG-6:

Orange 6 is one of the two cytoplasmic counterstain solutions that are used sequentially in the Papanicolaou staining method for clinical cytology. Orange-6 is stable in solution and gives predictable high quality staining results not previously possible with other formulations.

500 ml, 1000 ml, or 3.75 liters

Starting at: $18.10

Gill's Modified EA

Gill's Modified EA

Gill's Modified EA:

EA is one of the two cytoplasmic counterstain solutions that are used sequentially in the Papanicolaou staining method for clinical cytology. EA is stable in solution and gives predictable high quality staining results not previously possible with other formulations.

500 ml, 1000 ml, and 3.75 liters

Starting at: $21.00

Standard Carbon Adhesive Tabs

Carbon Tabs

Available in many sizes and with or without adhesive.

Starting at: $31.95

Harris Hematoxylin, Acidified (mercury-free) - Regressive Type

Harris Hematoxylin, Acidified (mercury-free) - Regressive Type

Harris Hematoxylin, Acidified (mercury-free) - Regressive Type:

Used with hematoxylin and eosin staining. Use Harris Hematoxylin for routine histology and cytology. Similar results can be achieved to those of Gill's Hematoxylin #1, #2, and #3 formulations by varying staining times.

500 ml or 1000 ml

Starting at: $29.95

Eosin Y, 0.5% alcoholic solution, Acidic

Eosin Y, 0.5% alcoholic solution, Acidic

Eosin Y, 0.5% alcoholic solution, Acidic:

Used as counterstain with hematoxylin. Contains acetic acid. Does not contain isopropanol or methanol. Ready to use with any automated stainer.

500 ml, 1000 ml, 3.75 liters

Starting at: $55.00

Eosin Y, 1.0% alcoholic solution, Non-Acidic

Eosin Y, 1.0% alcoholic solution, Non-Acidic

Eosin Y, 1.0% alcoholic solution, Non-Acidic:

Contains no acetic acid. Used as counterstain with hematoxylin. Ready to use with any automated stainer.

500 ml and 1000 ml

Starting at: $33.95

Film Thickness Transducer

Q-Pod Film Thickness Transducer

A new economical Quartz Crystal Monitor (QCM) for measuring thin film deposition rate and thickness. This film thickness transducer is the simplest and least expensive QCM available anywhere. It connects directly to a USB port on your PC. Windows® - based software included for operation and data logging. It weighs less than 2 ounces and is small enough to fit in a shirt pocket.

 

The Film Thickness Transducer Includes:

  • Windows based software for setup & operation
  • QCM sensor Simulator/Tester
  • 6" BNC Cable (connects unit to feedthrough)
  • 10' USB Cable (connects unit to your PC)

 

Important Note:

The Q-Pod Film Thickness Transducer includes everything you need outside the chamber. For a complete measurement system, you also need to order a sensor, feedthrough, in-vacuum cable, and crystals.

Starting at: Call For Price

SampleSaverTM

Small SampleSaver (SS100) & Sample Racks

The SampleSaverTM portable storage container system is a specialized container that enables a user to replace the reactive atmospheric air typically present in the container with an inert gas species. Once a sample is stored inside the inert atmosphere, the sample does not undergo reactions such as oxidation during storage and/or transportation. It is ideally suited to the preservation of microscopy samples that may undergo changes during the delay between sample preparation and analysis.

< >

Rack not included, please choose a rack from below

Starting at: Call For Price

L63500 Lab Table - Isolator Frame Only

L63500 Lab Table - Isolator Frame Only

Available in many sizes and dimensions.

Starting at: $2,795.00

L63500 Lab Table - Isolator with 2 in Stainless Steel Laminate

L63500 Lab Table - Isolator with 2 in Stainless Steel Laminate

Available in many sizes and dimensions.

Starting at: $3,150.00

L63500 Lab Table - Isolator with 2 in Stainless Steel and Plastic Laminate

L63500 Lab Table - Isolator with 2 in Stainless Steel and Plastic Laminate

Available in many sizes and dimensions.

Starting at: $3,195.00

L63500 Lab Table - Isolator with 4 in CleanTop II - 1/4-20 on 1 in spacing

L63500 Lab Table - Isolator with 4 in CleanTop II - 1/4-20 on 1 in spacing

Available in many sizes and dimensions.

Starting at: $3,895.00

L63500 Lab Table - Isolator with 100mm CleanTop II - M6 on 25mm spacing

L63500 Lab Table - Isolator with 100mm CleanTop II - M6 on 25mm spacing

Available in many sizes and dimensions.

Starting at: $3,895.00

Large SampleSaverTM (SS200)

Large SampleSaver (SS200) & Racks

The SampleSaverTM portable storage container system is a specialized container that enables a user to replace the reactive atmospheric air typically present in the container with an inert gas species. Once a sample is stored inside the inert atmosphere, the sample does not undergo reactions such as oxidation during storage and/or transportation. It is ideally suited to the preservation of microscopy samples that may undergo changes during the delay between sample preparation and analysis.

Special Features

  • Sample racks for holding SEM stubs, customized TEM grid boxes and metallographic mounts.
  • Sample racks are interchangeable and color coded.
  • Simple leak check feature to verify integrity.
  • Samples remain secure during transport.
  • Preserves chromium coated SEM samples.
  • Prevents oxidation of samples and coatings.
  • Suitable for SEM, TEM, SPM, EBSD and FIB samples.

Starting at: Call For Price

LMR-1 - Micro-Ruler

LMR-1 - Micro-Ruler

Traceable only.
$1,200.00
Magnification Reference Standards

Magnification Reference Standards

Available in traceable and not traceable as well as standards 3, 4 and 5.

Starting at: $490.00

LMRS-SEM/R - Retainer for SEM

LMRS-SEM/R - Retainer for SEM

1"OD x 1/8". Suitable for both LMRS-3 and LMRS-4.
$100.00
LMRS-OM/R - Optical Microscope Adapter

LMRS-OM/R - Optical Microscope Adapter

Optical Microscope Adapter
$100.00
MRS for TEM

MRS for TEM

For MRS -3 and MRS -4. 3mm diameter x 0.25mm

Starting at: $150.00

Re-calibration of LMRS

Re-calibration of LMRS

Available for LMRS 3XY, 4XY, 3XYZ and 4XYZ. Cleaning included.

Starting at: $1,000.00

Cleaning of LMRS

Cleaning of LMRS

For LMRS-3 and LMRS-4.

Starting at: $150.00

Items 571 to 600 of 1327 total

Page:
  1. 18
  2. 19
  3. 20
  4. 21
  5. 22
per page

Grid List

Set Descending Direction