Buy SEM Calibration & Test Specimens, Standards Online
Products include Ruled Diffraction Gratings, Low and Composite Magnification Specimens, Holey Carbon Film & more for the Scanning Electron Microscope
53130 - SEM Performance Standard
A certified test and performance sample for the SEM. Vapor deposited aluminum on a silicon substrate. Photo lithographed and etched. Ten separate measurements and tests may be performed with this one standard. Dimensions are printed near each target area. May be used for magnification calibration, magnification center and scan rotation center, geometry errors and pin cushion distortion, depth of field measurements, dynamic focus performance and tilt correction, orthogonality and linearity tests, stage motion tests and video performance and video loop stability. Instructions included. NBS Certified.
Please specify type of specimen mount required.
Learn More64000 - Low Magnification Calibration Specimen
Precision 400 mesh copper screening and 1000 mesh nickel screening is affixed to a specimen mount to aid in calibrating specimens at magnifications from 50x to 1000x.
Please specify the type of specimen mount required.
Learn More64015 - Composite Magnification Test Specimen
Composed of three magnification specimens attached firmly to a scanning microscope specimen mount. One specimen is 400 mesh copper screening for low magnification work. The middle specimen is a 15,240 line per inch grating for the high magnification range. The third specimen is a 1,500 mesh nickel screening for the middle magnification range. 50 mesh screening is placed over entire grating for strength. This composite specimen is both a time and space saver. Measurement charts and instructions for use included.
Please specify the type of specimen mount required.
Learn More64005 - Grating - 15,240 lines per inch
Made specifically for use in SEM's. This replica is taken from a ruled diffraction grating with 15,240 lines per inch. Very useful for magnification determination in the range of 1000x to 15,000x. A 50 mesh screen is placed over entire grating for strength. Measurement chart and instructions included.
Please specify the type of specimen mount required.
Learn More64007 - Grating - 28,800 lines per inch
Replica taken from a ruled diffraction grating. Useful for magnification of 3000x to 30,000x. A 50 mesh screen is placed over entire grating for strength. Measurement chart and instructions included.
Please specify the type of specimen mount required.
Learn More64010 - Grating - "Waffle"
Replica specifically made for SEM use is taken from a ruled diffraction grating with two sets of lines ruled at right angles to each other. There are 54,864 lines per inch in both directions. A 50 mesh screen is placed over entire grating for strength. Useful for magnification determination, detection and measurement of lens distortion, and the determination of the degree of fore-shortening in an image, as a function of specimen tilt. Measurement chart and instructions included.
Please specify the type of specimen mount required.
Learn More64025 - Image Quality Checker
A specimen of 200 mesh gold screening is firmly affixed to an SEM specimen mount. This provides a quick method of determining image quality. Good surface detail discernible at reasonably high magnification. Will not oxidize.
Please state specimen mount required.
Learn More