Standards and Specimen Preparation Supplies

Standards & Specimen Preparation Supplies, TEM & SEM Calibration

For TEM & SEM Tests & Calibration. Products include Embedding Capsules, Dri-Block oven, Collodion Solutions, Formvar Powders & Solutions, Release Agents/Dry Lubricants, Replicating Material, Mica Sheets, Grinders, Polishers, & Wire Saws, Zerostat Anti-static Instrument, Microanalytical Tools, Microtomy Supplies, Silicone Rubber Embedding Molds, & Magnification Reference Standards.

Items 1 to 10 of 154 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction
23200 - Premium Red Sable Brushes - Size #00

23200 - Premium Red Sable Brushes - Size #00

$21.95

For cleaning surface of liquid in microtome boat. First quality sable, very resilient. Also used to fasten samples on SEM studs using conducting paint. Size #00. Sold 3 per package. Learn More
Glass Scorer

23135 - Glass Scorer/Cutter

$13.95

Wheel type, for making glass knives. Learn More
Glass Pliers

23140 - Glass Pliers

$52.95

Unique pliers, 203 mm long, with fine adjusting screw, produce clean, smooth edges on glass up to 9.5 mm thick with a mere squeeze of the handles. Learn More
L03077 - Polisher Accessory - Wedge Polishing Clamp

L03077 - Polisher Accessory - Wedge Polishing Clamp

$60.00

Used with L03090 or L03067 and clamps the small pyrex rods into the L590. The clamp is anodized aluminum and squeezes against the pyrex rod, holding it in place. Included at no charge with the purchase of the BiPod Polisher. Learn More
L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

$48.95

Similar in function to the Pyrex insert. Specimens are mounted to the rod for wedge polishing applications. Included at no charge with the purchase of the BiPod Polisher. Learn More
L03065 - Polisher Accessory - Pyrex Insert - Large

L03065 - Polisher Accessory - Pyrex Insert - Large

$23.00

This insert is a glass stub used for TEM polishing of specimens. It is used in conjunction with the slotted L bracket and is used for wedge polishing applications. Not included with the purchase of the BiPod Polisher. Learn More
L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

$67.50

The SEM stub mount is designed specifically for mounting specimens for SEM polishing. It fits directly into the stage of most standard SEM stages and eliminates the need for remounting the specimen prior to SEM observation. Included at no charge with the purchase of the BiPod Polisher. Learn More
21680 - Ladd Capsule Holder and Finger Protector

21680 - Ladd Capsule Holder and Finger Protector

$16.95

A molded silicone rubber grip to hold embedding capsules steady and protect fingers while slitting capsules to remove resin block. Package of 5. Learn More
Beem Capsules

Beem Capsules

Starting at: $10.95

These pre-shaped polyethylene capsules were developed to replace the conventional round-bottomed gelatin capsules with all their attendant problems.

Important advantages are:

1. They produce preformed blocks.

2. Orientation of specimen is facilitated.

3. The plastic does not adhere to the polymerized block, which is readily removed.

4. There is no need to pre-dry these capsules to eliminate moisture, as was too often necessary with gelatin capsules.

 

Size 00 - 8 mm diameter x 20 mm high

Size 3 - 5.6 mm diameter x 14 mm high

Learn More
Conical Tip Embedding Capsule

Conical Tip Embedding Capsules

Starting at: $13.95

Used seccessfully for embedding very small or thin, elongated pieces of tissue. The shape of these capsules requires that care be exercised when filling them so there will be no air entrapped in the tips. Suitable for centrifugal packing of whole cells. Makes a block that is 7.9 mm OD x 18 mm high. Learn More

Items 1 to 10 of 154 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies