Buy Material Processing Equipment Online
Browse and purchase material processing equipment online at Ladd Research. Ladd Research is a supplier of Diamond Wheel Saws, Wire Saws, Tripod and Bipod polishers, grinders, and more. Order online or call (800) 451-3406.
L0115501 - Replacement Drive / Idler Pulley Wheels for Model L850 Wire Saw
Replacement Drive / Idler Pulley Wheels for Wire Saw - L850
$195.00
L260 - 3-Axis Goniometer - Model 260
Used to hold crystals in the process of determining crystallographic orientation using either Laue back reflection or optical orientation techniques.
For Low Speed Diamond Wheel Saw II - Model L660 and Wire Saw - Model L850
$4,800.00
L250 - 2-Axis Goniometer - Model 250
Used to hold crystals in the process of determining crystallographic orientation using either Laue back reflection or optical orientation techniques.
For Low Speed Diamond Wheel Saw II - Model L660 and Wire Saw - Model L850
$2,279.00
BiPod Polisher and Accessories
- Dimensions: 2.5"W x 2.75"D x 1.75" H
- Weight: 6 ounces
Starting at: $21.00
Miscellaneous Parts & Consumables for Model L900 Grinder/Polisher
Miscellaneous Parts & Consumables for Model L900 Grinder/Polisher
Note:
- 8" Glass Lapping Plate - Used with plain backed lapping films
- Manual Work Arm - Must be factory installed
Starting at: $36.00
Polishing Cloths
Polishing cloths, 8" diameter (except Polychem Cloth - 12" Diameter) with PSA backing. All in Packages of 10.
Starting at: $59.00
L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount
Designed specifically for wedge polishing of TEM specimens. the mount consists of a small aluminum clamping mechanism and 5 Pyrex rods which slide into the center of the clamp and are held in place when the L-bracket is tightened. Not included with the purchase of the BiPod Polisher.
$195.00
L03068 - Optional Tripod Polisher Accessory - X-section L-bracket
This bracket utilizes a small clamping mechanism on the face of the bracket to allow samples to be clamped without the need for using mounting waxes.
$157.00
L59001 - Optional Tripod Polisher Accessory - Ion Mill Stage
Designed to accept the special SEM stud used with the Tripod Polisher. The SEM stud is mounted in the Ion Mill Stage and sample is briefly ion milled to remove fine scratches, polishing debris and to give surface topography prior to SEM analysis.
$205.00
L03080 - Optional Tripod Polisher Accessory - Parallel Polishing Mount, Stainless Steel
A round stainless steel disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens. 1.25" Diameter
$43.00
L03061 - Optional Tripod Polisher Accessory - Planarizing Tool
This tool is a large square piece of aluminum used to planarize the delrin feet of the Tripod Polisher.
$228.00
L03060 - Optional Tripod Polisher Accessory - Parallel Polishing Mount
A round aluminum disc with a Pyrex rod mounted into the center of the disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens.
$72.00
Optional Tripod Polisher Accessory - Diamond Lapping Film
All discs 8" in diameter with pressure sensitive adhesive
Starting at: $179.95
L03768 - BiPod Polisher Accessory - L Bracket
For holding sample securely in BiPod Polisher. Included at no charge with the purchase of the BiPod Polisher.
$102.00
L03145 - BiPod Polisher Accessory - Foot for BiPod Polisher
Priced at $21.00 individually. Included at no charge with the purchase of the BiPod Polisher.
$21.00
L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )
The SEM stub mount is designed specifically for mounting specimens for SEM polishing. It fits directly into the stage of most standard SEM stages and eliminates the need for remounting the specimen prior to SEM observation. Included at no charge with the purchase of the BiPod Polisher.
$67.50
L0307601 - Tripod Polisher Accessory - Pyrex Wedge Polishing Stub
Used with L03077 Wedge Polishing Clamp.
$19.00
L03065 - Polisher Accessory - Pyrex Insert - Large
This insert is a glass stub used for TEM polishing of specimens. It is used in conjunction with the slotted L bracket and is used for wedge polishing applications. Not included with the purchase of the BiPod Polisher.
$23.00
L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)
Similar in function to the Pyrex insert. Specimens are mounted to the rod for wedge polishing applications. Included at no charge with the purchase of the BiPod Polisher.
$48.95
L03077 - Polisher Accessory - Wedge Polishing Clamp
Used with L03090 or L03067 and clamps the small pyrex rods into the L590. The clamp is anodized aluminum and squeezes against the pyrex rod, holding it in place. Included at no charge with the purchase of the BiPod Polisher.
$60.00
L03067 - Tripod Polisher Accessory - Screw Clamp L Bracket
This bracket has a set screw on each side of the bracket which is designed to hold an SEM mount in place.
$135.00
L03094 - Tripod Polisher Accessory - Plain L Bracket
Designed specifically for doing the first side polishing of TEM specimens. However, the plain L bracket can be used for polishing SEM cross sections if additional mounting prior to microscope viewing is to be done.
$115.00
Tripod Polisher Accessory - Slotted L Bracket - L03090 - L03090
The most commonly used bracket. It has a slot through the front to accommodate the Pyrex inserts for wedge polishing, the SEM stub mount, as well as the L59002 Wedge Polishing Mount.
$190.00
L03096 - Tripod Polisher Accessory - Heater Block
A large square aluminum block which is designed to be used on a hot plate. The block provides a stable platform onto which the L brackets can be placed and heated to the proper temperature for mounting specimens.
$65.00
