Call to Order : (800) 451-3406

My Account

Welcome to Ladd!

  • Home /
  • Transmission Electron Microscopy Supplies

Transmission Electron Microscopy Supplies

Buy Transmission Electron Microscopy Supplies Online

Browse and purchase from a large selection of Transmission Electron Microscopy Supplies that are available at Ladd Research. Find wire saws, grinders, embedding molds, evaporators, and more. Order online or call (800) 451-3406.

Items 1 to 30 of 60 total

Page:
  1. 1
  2. 2
per page

Grid List

Set Descending Direction
Thallous Chloride Diffraction Standard

40825 - Thallous Chloride Diffraction Standard

Standard grid is 3.05mm 200 mesh copper.
$26.95
/

L03075 - Tripod Polisher Accessory - Microscope Stand

Designed to hold the Tripod Polisher upside down to allow for viewing the specimen under a dissecting microscope. The stand can also be used as a storage device in between processing steps.
$65.00
/

L070501 - Tripod Polisher Accessory - Glass Leveling Slide (2 each)

For leveling the L590TS.
$6.50
/

L03062 - Tripod Polisher Accessory - Delrin Foot (sold as each, needs 3 per unit)

For use in micrometer assembly.
$31.95
The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Tripod Polisher for TEM and SEM & Accessories

The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The following accessories are included at no charge with the purchase of the L590TS. (prices are included if you wish to purchase additional accessories)

Starting at: $6.50

Tripod Polisher for TEM

Tripod Polisher for TEM & Accessories

The Tripod Polisher, L590TEM, comes complete with sufficient accessories to prepare samples for transmission electron microscopy (TEM). The following accessories are included at no charge with the purchase of the L590TEM. (prices are included if you wish to purchase additional accessories)

Starting at: $6.50

The Tripod Polisher, L590TS, comes complete with sufficient accessories to prepare samples for both scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Tripod Polisher for SEM & Accessories

The Tripod Polisher, L590SEM, comes complete with sufficient accessories to prepare samples for scanning electron microscopy (SEM). The following accessories are included at no charge with the purchase of the L590SEM. (prices included if you wish to purchase additional accessories)

Starting at: $6.50

Optional Tripod Polisher Accessory - Diamond Lapping Film

Optional Tripod Polisher Accessory - Diamond Lapping Film

All discs 8" in diameter with pressure sensitive adhesive

Starting at: $179.95

"Holey" Film

"Holey" Film

3.0 mm diameter. Comes in 200 or 300 mesh, either copper or molybdenum

Starting at: $18.25

12030 - Calibrating Carbon

12030 - Calibrating Carbon

Where surface roughness studies are necessary, these spherical particles, lying in the range of 100-500 nm, are invaluable. Shadows of these particles accurately calibrate every area being examined. Also, the shadows may be used to calculate elevations and depressions. Complete instructions for use included.
$8.95
40810 - Gold Shadowed Latex

40810 - Gold Shadowed Latex

Latex spheres are 0.234 µm in diameter.
$27.95
/

L03096 - Tripod Polisher Accessory - Heater Block

A large square aluminum block which is designed to be used on a hot plate. The block provides a stable platform onto which the L brackets can be placed and heated to the proper temperature for mounting specimens.
$65.00
L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

L03063 - Polisher Accessory - SEM Stub Mount ( 4 each )

The SEM stub mount is designed specifically for mounting specimens for SEM polishing. It fits directly into the stage of most standard SEM stages and eliminates the need for remounting the specimen prior to SEM observation. Included at no charge with the purchase of the BiPod Polisher.
$67.50
Molybdenum Oxide Diffraction Standard

40830 - Molybdenum Oxide Diffraction Standard

Standard grid is 3.05mm 200 mesh copper.
$30.95
40700 - Low Magnification Carbon Grating

40700 - Low Magnification Carbon Grating

200 mesh copper grid. A germanium-shadowed carbon replica of a ruled diffraction grating having 15,240 lines per inch, with actual grating spacing of 1667 nm. Useful for low magnification work with electron microscopes.
$48.95
40710 - Intermediate Magnification Carbon Grating

40710 - Intermediate Magnification Carbon Grating

200 mesh copper grid. A germanium-shadowed carbon replica of a ruled diffraction grating having 28,800 lines per inch, with actual grating spacing of 882 nm.
$49.95
40720 - High Magnification Carbon Grating

40720 - High Magnification Carbon Grating

300 mesh copper grid. A germanium-shadowed carbon replica of a ruled diffraction grating having 54,864 lines per inch, actual grating spacing of 463 nm. Of particular value in high magnification work where the 28,800 line grating presents too few lines for accurate measurement.
$51.95
Polystyrene Latex Spheres

Polystyrene Latex Spheres

Available in many diameters. Note: Particle sizes may vary somewhat from those listed. Exact size listed on each vial. Each vial contains 10ml of an aqueous suspension of 0.2% (w/v) spheres per ml. In the item description, the number of particles per ml is designated with an exponent. For example, 3.7 x 10E12 is equivalent to 3.7 x 1012.

Now Available!! In addition to the standard latex spheres listed below, we now offer NIST traceable polystyrene latex spheres in various sizes. Certificate of Compliance available. Please call us for details.
Please Note!! During the winter months these items must be shipped via next day air to minimize the chance of freezing.

Starting at: $32.95

Mag*I*Cal TEM Calibration Standard

40701 - Mag*I*Cal TEM Calibration Standard

Performs all of the three major instrument calibrations for a TEM: image magnification; camera constant for indexing diffraction patterns; and image/diffraction pattern rotation for relating crystal directions to features in the image.
$1,615.00
/

Tripod Polisher Accessory - Slotted L Bracket - L03090 - L03090

The most commonly used bracket. It has a slot through the front to accommodate the Pyrex inserts for wedge polishing, the SEM stub mount, as well as the L59002 Wedge Polishing Mount.
$190.00
/

L03094 - Tripod Polisher Accessory - Plain L Bracket

Designed specifically for doing the first side polishing of TEM specimens. However, the plain L bracket can be used for polishing SEM cross sections if additional mounting prior to microscope viewing is to be done.
$115.00
/

L03067 - Tripod Polisher Accessory - Screw Clamp L Bracket

This bracket has a set screw on each side of the bracket which is designed to hold an SEM mount in place.
$135.00
L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

L0307602 - Polisher Accessory - Pyrex Wedge Polishing Rod (4 each)

Similar in function to the Pyrex insert. Specimens are mounted to the rod for wedge polishing applications. Included at no charge with the purchase of the BiPod Polisher.
$48.95
L03065 - Polisher Accessory - Pyrex Insert - Large

L03065 - Polisher Accessory - Pyrex Insert - Large

This insert is a glass stub used for TEM polishing of specimens. It is used in conjunction with the slotted L bracket and is used for wedge polishing applications. Not included with the purchase of the BiPod Polisher.
$23.00
/

L0307601 - Tripod Polisher Accessory - Pyrex Wedge Polishing Stub

Used with L03077 Wedge Polishing Clamp.
$19.00
/

L0115501 - Replacement Drive / Idler Pulley Wheels for Model L850 Wire Saw

Replacement Drive / Idler Pulley Wheels for Wire Saw - L850
$195.00
Silicon Monoxide Lacy Film

Silicon Monoxide Lacy Film

A highly stable perforated film with low background contrast. Less hydrophobic than carbon. Excellent for aqueous solutions. Standard grid is 200 mesh copper. Other grid sizes available on request.

Starting at: $64.95

Lacy Film

Lacy Film

This thin carbon coated Formvar film has a wide variation of hole sizes and shapes, thereby forming a lace-like network. It is invaluable for high resolution electron microscopy since specimen material bridging the holes can be studied and photographed without substrate interference. Note!! This product is used primarily as a substrate. For a perforated film used for checking astigmatism in the TEM please see our Holey Film. Package of 10. Please state grid diameter and metal desired.

Starting at: $59.95

LD500i - D500i Dimpler

LD500i - D500i Dimpler

The Model LD500i Dimpler has become an indispensable tool for TEM specimen preparation. The dimpling technique, applicable to a myriad of material types, yields a higher quality specimen with a broader, near electron transparent area which reduces ion milling times. The Model LD500i automates the dimpling technique so that the most demanding specimens can be dimpled to < 10 microns routinely and repeatably. Real time measurement of tool height, specimen thickness, and tool runout allow the user to precisely control the dimpling process. With the proper tooling and parameter adjustment, the dimpling technique with the LD500i can be completed with ease.
Call For Price
L595 BiPod Polisher

BiPod Polisher and Accessories

    Specifications:
  • Dimensions: 2.5"W x 2.75"D x 1.75" H
  • Weight: 6 ounces

Starting at: $21.00

Items 1 to 30 of 60 total

Page:
  1. 1
  2. 2
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies

Browse By
Category
  1. TEM Calibration & Test Specimens (15)
  2. Materials Processing Equipment/Grinders, Polishers & Wire Saws (42)

 

Categories

Our Address

Ladd Research, 3 Ewing Place, Essex Junction, VT 05452

(800) 451-3406 (USA)
(802) 658-4961



Newsletter

Our Company


Customer Service