Buy Transmission Electron Microscopy Supplies Online

A 1500 mesh, 0.00015" thick nickel screen is precisely mounted within a 3.0 mm copper athene-type, double grid. The double grid is firmly secured to provide a sturdy specimen to last indefinitely. The very accurate spacings may be used to check magnification. The fine wire projections aid in the measurement of field distortions. One bar and one space measures 16.94 µm. Learn More

Crystals of bovine liver catalase are recommended as an internal standard of length in the electron microscope. Absolute sizes in the magnification range of 10,000 X to 150,000 X may be determined with an accuracy of +/- 2.5% and relative sizes with an accuracy of +/- 1.5%. Based on experimental data, the principal catalase lattice spacing is 172 +/- 4 Angstroms. Lattice lines separated by half this distance are used in actual size determinations. Crystals are suspended in antibacterial solution. Sealed in 10 ml glass vial. Learn More

Water soluble coolant concentrate, 1 qt Learn More

120 ml Learn More

Standard grid is 3.05mm 200 mesh copper. Learn More

The LEBSD (Electron Backscatter Diffraction) Specimen Polishing Kit is based on the Model L150 micrometer controlled lapping fixture. Two mounting blocks are included to hold a 1/8" diameter pin SEM mount for plan view preparation of a Tripod Polisher SEM mount for XSEM preparation. The stubs are secured into the block with a set screw prior to loading into the lapping fixture. The kit includes a SampleSaver FIB storage container and two tier locking rack, and pin adapters for holding the L150 mounts. A pre-tilt EBSD specimen stage is included with three height segments. The low profile mount fits most SEM load locks and can be stored in the Sample Saver without removal from the pre-tilt holder. Special Features A relatively simple and inexpensive method for mechanically polishing and mounting EBSD specimens on an SEM stub, allowing quick transfer without dismounting a prepared sample. Pre-Tilt EBSD specimen stage keeps sample at a fixed angle of 70o or the complementary angle of 20o in the chamber. The process utilizes conventional, easily available, precision abrasives and is compatible with other sample preparation equipment and consumables. The Model L150 Lapping Fixture can be utilized for other routine parallel and angled polishing processes without modification. Up to 1.25" diameter mounting blocks are available. A low force Model L150L lapping fixture is available as an option. Complete process recipes, consumable supplies, and other accessories are available and include hand lapping tray, lapping and polishing machines, hot plate/cooling tray and sample mounting devices. Learn More

Base with 3 micrometer assemblies and case. Learn More

Used with L03090 or L03067 and clamps the small pyrex rods into the L590. The clamp is anodized aluminum and squeezes against the pyrex rod, holding it in place. Included at no charge with the purchase of the BiPod Polisher. Learn More

Base with 3 micrometer assemblies and case. Learn More