Buy Transmission Electron Microscopy Supplies Online

Miscellaneous Parts & Consumables for Model L900 Grinder/Polisher Note: - 8" Glass Lapping Plate - Used with plain backed lapping films - Manual Work Arm - Must be factory installed

Colloidal products available in 16 oz bottles

SiC dressing stick (for blade dressing)

A round aluminum disc with a Pyrex rod mounted into the center of the disc. This assembly is mounted to the base of the Tripod Polisher and is primarily used for plan parallel polishing of specimens.

Designed to accept the special SEM stud used with the Tripod Polisher. The SEM stud is mounted in the Ion Mill Stage and sample is briefly ion milled to remove fine scratches, polishing debris and to give surface topography prior to SEM analysis.

Base with 3 micrometer assemblies and case.

The LEBSD (Electron Backscatter Diffraction) Specimen Polishing Kit is based on the Model L150 micrometer controlled lapping fixture. Two mounting blocks are included to hold a 1/8" diameter pin SEM mount for plan view preparation of a Tripod Polisher SEM mount for XSEM preparation. The stubs are secured into the block with a set screw prior to loading into the lapping fixture. The kit includes a SampleSaver FIB storage container and two tier locking rack, and pin adapters for holding the L150 mounts. A pre-tilt EBSD specimen stage is included with three height segments. The low profile mount fits most SEM load locks and can be stored in the Sample Saver without removal from the pre-tilt holder. Special Features A relatively simple and inexpensive method for mechanically polishing and mounting EBSD specimens on an SEM stub, allowing quick transfer without dismounting a prepared sample. Pre-Tilt EBSD specimen stage keeps sample at a fixed angle of 70o or the complementary angle of 20o in the chamber. The process utilizes conventional, easily available, precision abrasives and is compatible with other sample preparation equipment and consumables. The Model L150 Lapping Fixture can be utilized for other routine parallel and angled polishing processes without modification. Up to 1.25" diameter mounting blocks are available. A low force Model L150L lapping fixture is available as an option. Complete process recipes, consumable supplies, and other accessories are available and include hand lapping tray, lapping and polishing machines, hot plate/cooling tray and sample mounting devices.

A 1500 mesh, 0.00015" thick nickel screen is precisely mounted within a 3.0 mm copper athene-type, double grid. The double grid is firmly secured to provide a sturdy specimen to last indefinitely. The very accurate spacings may be used to check magnification. The fine wire projections aid in the measurement of field distortions. One bar and one space measures 16.94 µm.

Used to hold crystals in the process of determining crystallographic orientation using either Laue back reflection or optical orientation techniques. For Low Speed Diamond Wheel Saw II - Model L660 and Wire Saw - Model L850

For holding sample securely in BiPod Polisher. Included at no charge with the purchase of the BiPod Polisher.