Vacuum Accessories - Grease, Mechanical & Diffusion Pump Oil & More

For temporary storage of up to 1 or 2 quarts of liquid nitrogen. Unbreakable, stainless steel construction complete with threaded Uno-Flow stopper. Stopper allows for venting and pouring of liquid while stopper remains in place. Due to its excellent insulating properties, can be used for hot liquids also. Learn More

10 cps. Replacement fluid for Ladd Chiller. 1 quart Learn More

This new mixing system uses a precise method of mixing epoxy components. The system will save preparation time and the epoxy will always be measured and mixed properly the first time.

Applicator Gun set includes Torr Seal cartridges (2 oz.) and 3 mixers.

Learn More

TorrLube is a lubricant specifically formulated to work under extreme pressure and temperatures in high vacuum applications. When applied sparingly to O-rings and feed-throughs, TorrLube's excellent lubricating qualities dramatically extend the integrity of vacuum to atmosphere seals, thereby improving vacuum system performance over longer time periods.

Learn More

Generic equivalent of Torr Seal. Seals leaks with no solvent evaporation. Applications to thermistors and all varieties of vacuum systems. Consists of 1.2 ounces of hardener and 2.8 ounces of resin. Learn More

Excellent sealant for leaks in vacuum equipment requiring vacuum down to 10^-9 torr or lower. Forms a high strength bond with metals, ceramics or glass. No solvent involved to evaporate. Torr Seal is a two component system easily mixed. At room temperature it hardens in 1 hour, cures in 24 hours. At 60^oC it hardens in 30 minutes, cures in 90 minutes. Forms a reliable seal for long term use. Package of two tubes, total weight is 135 g.

Learn More

Silicone lubricant which maintains its consistency from -40 to +230o C. Chemical resistant and vapor pressure at 10-8 torr. Tube size is 5.3 oz. Learn More

General purpose lubricant similar to Apiezon L but containing more wax. Vapor pressure of 2 x 10-9 torr at 20o C. Recommended for use in vacuum work and as a good, general lubricant throughout the laboratory. Not intended for use with joints above 30o C. Sold in 25 g tube. Learn More

Good, general purpose high vacuum grade lubricant. Petrolatum hydrocarbon grease containing no additives. Vapor pressure of 8 x 10-11 torr at 20o C. May be used on all ground joints in vacuum systems except where joint temperatures exceed 30o C. Sold in 25 g tube. Learn More