Vacuum Equipment Including Sputtering Targets & Desiccator Cabinets

A shield greatly reduces deposits of evaporated metals on the electrodes and bell jar, yet allows clear observation of the amount on the specimen. Special features of each unit are:

• Two side arms which fit filament posts, each supporting a chrome-plated disc. 
• An annealed Pyrex tube which slides over the discs and is held securely in place by a coiled spring. 
• A precisely sized slot in the tube, which aligns accurately with a hole in the metal shield held in place beneath the slot, allowing controlled passage of evaporated metal to specimens. 
• Pyrex tube and metal shield can be rotated, permitting coating or shadowing from any angle. 
• Pyrex tubing will not crack from heat generated during evaporation. 

Complete instructions included with each unit.

The Replacement Tube is Annealed Pyrex. Extra tubes are helpful, since one can be in use while others are being cleaned. All edges are fire polished.

Learn More

The superior dehumidification performance of the auto-desiccator model makes it a natural choice for more perishable and expensive chemicals that require constant low humidity. Totally automatic, continual desiccation with silica beads, and regeneration every 20 minutes, keeps the RH in the desiccator at a constant low level. No long regeneration lag between cycles - minimal RH change from opening the door. Two fans guarantee continuous air flow either within the cabinet, or continuous exhaust of humid air.

Learn More

Non electric
Built-in hygrometer, 3 shelves 3 shelf positions, internal volume: 1.58 cu. ft.
2 latches. Provision for lock or tamper evident seal
Door opening: 12.25"H x 8.9"W
Overall dimensions: 16.4"H x 13.4"W x 16.3"D

Learn More

The superior dehumidification of the Auto-Desiccator model makes it a natural choice for more perishable and expensive chemicalos that require constant low humidity. Totally automatic, continual desiccation with silica beads, and regeneration every 20 minutes, keeps the RH level in the Secador ^® 4.0 Desiccator at a constant level. No long regeneration lag between cycles - minimal change from opening the door. Two fans quarantee continuous air flow either within the cabinet, or continuous exhaust of humid air.

Learn More

May be stacked two high.

Use with any desiccant.

Learn More

Patented Dehumidifying Module - Automatic Desiccant Regeneration
Superior Humidity Reduction - safe storage
Patented sealed construction - airtight, dust and moisture-free storage

Built-in hygrometer, Auto-Desiccator Module

2 shelves, 2 positions, 2 latches

Provision for lock or tamper evident seal

Reduces RH from 75% to <25% in approximately 8 hours

Maintains RH level within narrow range, Internal Volume: 2 cu. ft.

Door opening:  8.9" H x 16.4" W

Overall dimensions: 13.4" H x 20.4" W x 16.3" D

Learn More

Use with any desiccant

Non Electric

Built-in hygrometer, 2 shelves, 2 shelf positions

Internal volum e:  2 cu. ft.

2 latches. Provision for lock or tamper evident seal

Door opening:  8.9" H x 16.4" W

Overall dimensions:  13.4" H x 20.4" W x 16.3" D

Learn More

Reusable. Nothing to throw away. Silica gel absorbs moisture inside aluminum case. Traditional blue to pink color change tells you it's time to regenerate. Use one canister for each 3 cu. ft. of space. Regenerate at 150o C. Dimensions: 2" x 4" x 0.5". Learn More

Smooth action bearings facilitate easy turning Perfect for use in desiccators and cabinets as well as on a table or shelf . Works best in Secador 1.0 and above.

Dimensions: 23 x 1.5cm (9.0 x 0.6")

Learn More